Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
2017.02 Early release. Synth rack continues to revert to right anchor
I know this has been talked about but it seems more severe now?
It seems that every time I re-open a project, first call to the synth rack lis opened locked to the right.
I have moved it where I prefer and saved the project only to find it again on the right.
Am I not saving it correctly(?) or is the bug now worse?
Anybody else?
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/02/28 00:23:16
(permalink)
That's not happening for me.
Have you eked wether it's part of a Lens or Screenset that's active when the Project opens.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/02/28 04:30:36
(permalink)
Hmmm...
I guess it's possible, though I don't currently use lenses.
But even if I did. If I change the rack to floating and save the song. Close the rack (don't want the song to open with the rack) and save it again.
The next time I open the project and call the rack it's docked back on the right.
|
cyberzip
Max Output Level: -78 dBFS
- Total Posts : 613
- Joined: 2003/11/12 13:09:45
- Location: Sweden
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/02/28 07:48:20
(permalink)
Please have a look at the thread from the Problem reports forum below. Is that what you're referring to? Synth rack does not remember its undocked state (2017.01) http://forum.cakewalk.com...e-201701-m3562283.aspx
post edited by cyberzip - 2017/02/28 21:16:51
|
musicjohnnie
Max Output Level: -86 dBFS
- Total Posts : 227
- Joined: 2009/09/20 18:38:43
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/02/28 08:44:48
(permalink)
Hello all,
I mentioned this earlier in a thread. Except, I cannot get any moving around modules to stay where I save them. Someone talked about saving in mix (scene). This just started a couple of updates ago. Doesn't matter what I do or where I save, close down and when reopened, not saved. Luckily it hasn't affected workflow. Just have to move around modules each time I open project. An explanation would be nice, or is this a bug.
MJ
Dell XPS 9100 Studio I7 930.....16G ram Win 10 anniv.(now back to win 7) Sonar Platinum (lifer)
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/02/28 21:48:28
(permalink)
Thanks cyberzip.
I just made a tiny confirmation post there as well. I guess I didn't get bothered enough the month before? 👽
As to other windows not returning to their positions? It seems many code calls must be using a library source that on first call defaults to upper left corner. Then f moved it will return to its new location while the project/code is inning only to again be back to default next time a song is opened. Maybe the macro doesn't allow for change?
I know that it's been such for what feels, "forever"!
👽🎸🎶
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/02/28 23:24:19
(permalink)
musicjohnnie
Hello all,
I mentioned this earlier in a thread. Except, I cannot get any moving around modules to stay where I save them. Someone talked about saving in mix (scene). This just started a couple of updates ago. Doesn't matter what I do or where I save, close down and when reopened, not saved. Luckily it hasn't affected workflow. Just have to move around modules each time I open project. An explanation would be nice, or is this a bug.
MJ
This could be a locked screen set.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/03/01 05:20:12
(permalink)
I believe some of this started with 2017.01 because here the browser won't remember its minimized state anymore i.e. after save / close / reopen project, the browser seems to be always expanded although I usually keep it minimized/closed
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/03/01 05:22:56
(permalink)
Here's hoping they can fix this before the official release.
Has anyone placed it in the problem reporter? Is that being used anymore for this?
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/03/01 05:24:15
(permalink)
mudgel
musicjohnnie
Hello all,
I mentioned this earlier in a thread. Except, I cannot get any moving around modules to stay where I save them. Someone talked about saving in mix (scene). This just started a couple of updates ago. Doesn't matter what I do or where I save, close down and when reopened, not saved. Luckily it hasn't affected workflow. Just have to move around modules each time I open project. An explanation would be nice, or is this a bug.
MJ
This could be a locked screen set.
Hmmm... I'll have to look at that. Thanks. I hadn't thought to look for that.
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: 2017.02 Early release. Synth rack continues to revert to right anchor
2017/03/01 15:28:22
(permalink)
Nope. Not locked screenset nor a lense.
If I leave the synth rack visible, it remembers its location. If I close it and save. It reverts to right dock when re-opened.
|