700R Direct Mix preset question

Author
Post
Essentials Only Full Version
John T
Max Output Level: -7.5 dBFS
  • Total Posts : 6783
  • Joined: 2006/06/12 10:24:39
  • Status: offline
2012/06/08 07:27:28 (permalink)

700R Direct Mix preset question

Does anyone know if there's a way of having a direct mix pre-set load automatically? What I'm trying to do is have Sonar start up with the Direct Mix output set to "main" and already switched on. No matter what I do, it defaults to having no output selected. This is annoying, as it's the only thing stopping me controlling the direct recording process entirely from the console (In IO Control mode, I have the mic pres on the faders and the direct outputs on the encoders, so if I could get the main output to be pre-selected, I wouldn't have to open the IO control panel and fiddle around in there).

http://johntatlockaudio.com/
Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
#1

2 Replies Related Threads
    starfield
    Max Output Level: -90 dBFS
    • Total Posts : 14
    • Joined: 2012/09/22 18:34:55
    • Status: offline
    Re:700R Direct Mix preset question 2012/10/08 06:56:27 (permalink)
    Hi John, I use the following to achieve this - all started "manually" by creating a shortcut for the VS-700R I/O Editor calling up a setup file. Due to having 2 I/O Units and finding that parameters all not set properly for both units from one file, I have created a second setup for Unit2. By calling Shell:StartUp and copying both shortcuts from my desktop into the startup folder shown, now each time I start my laptop the configuration is loaded and I am ready to go. A little diasadvantage is currently that the VS I/O Editor has to be closed, but I will try to resolve that one, too. Hope that someone from Cakewalk might add here, regarding the Unit1/Unit2 Setup Issue from a single file. And may be adding a way to close the VS700 I/O editor with a parameter, after the setup file has been loadad ... Hope this "workaround" might work for you, too. Pls let me know.

    Win10SP1,SONAR Platinum, Cubase 8 Pro, Ableton Live, Cakewalk : VS-700 Cons. & 2 I/O's. YAMAHA Tyros4, MOTIF XS Rack, MOXF8,  Roland JUNO Stage. Dell Precision T7500 Dual HexCore 5650@3.5GHz, 96GB RAM
    #2
    John T
    Max Output Level: -7.5 dBFS
    • Total Posts : 6783
    • Joined: 2006/06/12 10:24:39
    • Status: offline
    Re:700R Direct Mix preset question 2012/10/08 07:48:35 (permalink)
    Ah, interesting, I'll give that a try.

    http://johntatlockaudio.com/
    Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
    #3
    Jump to:
    © 2024 APG vNext Commercial Version 5.1