cleberschniedger
Max Output Level: -90 dBFS
- Total Posts : 13
- Joined: 8/17/2015
- Location: Rio Grande do Sul, Brazil
- Status: offline
A simple idea to improve workflow: "Replace Audio FX" option
Currently, the FX menu allows you to delete or insert certain effect. If you wish to replace an effect with another (for example, a delay by another delay), this requires at least two operations (delete an old/add a new fx or add a new/delete an old fx). To improve workflow, I suggest creating an option to simply replace the fx (what would require only one operation).  Additionally, it could be created a "Replace FX Chain" option. Regards,
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 11/4/2003
- Location: Parkesburg, PA
- Status: offline
Re: A simple idea to improve workflow: "Replace Audio FX" option
August 07, 16 12:33 AM
(permalink)
This may have been requested before, but definitely a +1 from me!
We have it for synths, so...
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
RSMCGUITAR
Max Output Level: -64 dBFS
- Total Posts : 1318
- Joined: 12/27/2014
- Location: Toronto
- Status: offline
Re: A simple idea to improve workflow: "Replace Audio FX" option
August 09, 16 9:14 PM
(permalink)
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 9/28/2014
- Location: Norway
- Status: offline
Re: A simple idea to improve workflow: "Replace Audio FX" option
August 11, 16 6:18 AM
(permalink)
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
BobF
Max Output Level: 0 dBFS
- Total Posts : 8124
- Joined: 11/5/2003
- Location: Missouri - USA
- Status: offline
Re: A simple idea to improve workflow: "Replace Audio FX" option
August 11, 16 11:00 AM
(permalink)
+1 Steve - help me again. I promise this is the last time ;)
This is a great idea. I know there are a lot of click saving FRs that in isolation don't mean much, but if a number of them were implemented we could save hundreds+ clicks per project.
Bob -- Angels are crying because truth has died ...Illegitimi non carborundum --Studio One Pro / i7-6700@3.80GHZ, 32GB Win 10 Pro x64 Roland FA06, LX61+, Fishman Tripleplay, FaderPort, US-16x08 + ARC2.5/Event PS8s Waves Gold/IKM Max/Nomad Factory IS3/K11U
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 5/1/2007
- Location: Victoria, Australia
- Status: offline
Re: A simple idea to improve workflow: "Replace Audio FX" option
August 11, 16 4:27 PM
(permalink)
If it could automatically identify the type of plugin being replaced (e.g. reverb, compressor, etc.) and present you with a menu that excluded everything else not in that category, then this would certainly be convenient. It's the scrolling through plugin menus that takes most of the time when replacing a plugin, not Right-Click Delete, which takes a negligible amount of time.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|