Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
ACCESS TI and sonar X1 expanded
²²Hi I have just discovered that X1 does not compensate the latency generated while recording from the ACCESS TI . So its always starting like 4-20(!!!!!!!) ms late the audio in the recordings .....in cubase I did not have this problem . Since its TI , I have 2 use the realtime "bounce" ........... but it actualy starts each recording too late ! Its not normal ----- why is this in sonar like this now ? I just had great fun with absolut tight realtime bounces with ACCESS TI in cubase ??? I can not explain this ????? in other words : the ACCESS looses "time" in sonar X1 expanded ! Its midi data is not synchronized 2 the recorded audio data ....some 100ms !!!!!!!!!!!!!!!!!!! OMG! have a nice day is there a trick ???? it realy ,realy pisses me off ! sry my french ......I just worked on a project with a friend ,,,,,,had to use cubase with my ALL new access TI ...I was surprised how tight it records ---- now I just had my shock in sonar X1 OMG
post edited by Heroics - 2012/10/01 06:00:05
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 17:21:10
(permalink)
sry but this is for me a disaster , I will have to change to cubase now ? CAN PLS SOMEONE HELP ? ...I DO NOT WANT LATENCY RECORDED IN ONE SEQUENCER AND IN THE OTHER ALL IS FINE ? OMG !!! Heroics
Hi
I have just discovered that X1 does not compensate the latency generated while recording from the ACCESS TI . So its always starting like 4 ms late the audio in the recordings .....in cubase I did not have this problem .
have a nice day
is there a trick ????
it realy ,realy pisses me off ! sry my french ......I just worked on a project with a friend ,,,,,,had to use cubase with my ALL new access TI ...I was surprised how tight it records ----
now I just had my shock in sonar X1
OMG
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 17:35:11
(permalink)
post edited by Heroics - 2012/10/01 06:24:32
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 17:37:26
(permalink)
LOOOOOOOOOOOOOOOOOOOOOOOOL
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 17:44:22
(permalink)
omg
post edited by Heroics - 2012/09/30 17:50:59
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 17:46:24
(permalink)
I CAN NOT BELIVE THIS !!!!!!!!!!!!!!! I make a midi "drawing " --in the audio recording of IT .....I want exactly , on the Microsecond ,,,the IDENTICAL ALLIGNMENT of my AUDIO DATA ...IN CORRESPONDENCE 2 THE MIDI DATA .----this is ........I cry now ......haha I cant believe it
post edited by Heroics - 2012/09/30 18:52:08
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 18:11:20
(permalink)
hope some one can help with the most ugly latency problems of ACCESS TI in sonar X1 ??? Heroics
²²Hi
still NO clues out there ? lmao
I have just discovered that X1 does not compensate the latency generated while recording from the ACCESS TI . So its always starting like 4-20(!!!!!!!) ms late the audio in the recordings .....in cubase I did not have this problem .
Since its TI , I have 2 use the realtime "bounce" ...........
but it actualy starts each recording too late ! Its not normal ----- why is this in sonar like this now ?
I just had great fun with absolut tight realtime bounces with ACCESS TI in cubase ??? I can not explain this ?????
have a nice day
is there a trick ????
it realy ,realy pisses me off ! sry my french ......I just worked on a project with a friend ,,,,,,had to use cubase with my ALL new access TI ...I was surprised how tight it records ----
now I just had my shock in sonar X1
OMG
|
daveny5
Max Output Level: 0 dBFS
- Total Posts : 16934
- Joined: 2003/11/06 09:54:36
- Location: North Carolina
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 18:19:06
(permalink)
This is not normal. If you would calm down and provide some information about your setup, maybe someone would help you.
Are you using the TI's ASIO driver? How do you have it setup? What's your computer's specs? What bit depth and sample rate are you using. How do you have the latency setup on the TI's control panel. Sonar can do anything Cubase can do and better.
Dave Computer: Intel i7, ASROCK H170M, 16GB/5TB+, Windows 10 Pro 64-bit, Sonar Platinum, TASCAM US-16x08, Cakewalk UM-3G MIDI I/F Instruments: SL-880 Keyboard controller, Korg 05R/W, Korg N1R, KORG Wavestation EX Axes: Fender Stratocaster, Line6 Variax 300, Ovation Acoustic, Takamine Nylon Acoustic, Behringer GX212 amp, Shure SM-58 mic, Rode NT1 condenser mic. Outboard: Mackie 1402-VLZ mixer, TC Helicon VoiceLive 2, Digitech Vocalist WS EX, PODXTLive, various stompboxes and stuff. Controllers: Korg nanoKONTROL, Wacom Bamboo Touchpad
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 18:43:15
(permalink)
Vista 64 bit , I use MOTUS ultralite asio , X1 exp. ACCESS TI snow INTEL DX58SO (!) i7 quad 2,9ghz I use 44khz 32Bit sonar seems to have problems with the start only of the recording . If I widen the midi clip , so that it would have one bar with no data in it , sonar will be very tight ........ daveny5
This is not normal. If you would calm down and provide some information about your setup, maybe someone would help you.
Are you using the TI's ASIO driver? How do you have it setup? What's your computer's specs? What bit depth and sample rate are you using. How do you have the latency setup on the TI's control panel. Sonar can do anything Cubase can do and better.
post edited by Heroics - 2012/09/30 18:49:35
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 18:44:29
(permalink)
I swear to God I love the audio quality which I get outa sonar over cubases 100% ! I am aware of sonar beeing the better choice ..NOW only this problem is annoying very for me ATM. Heroics
Vista 64 bit , I use MOTUS asio , X1 exp.
INTEL DX58SO (!)
sonar seems to have problems with the start only of the recording . If I widen the midi clip , so that it would have one bar with no data in it , sonar will be very tight ........
daveny5
This is not normal. If you would calm down and provide some information about your setup, maybe someone would help you.
Are you using the TI's ASIO driver? How do you have it setup? What's your computer's specs? What bit depth and sample rate are you using. How do you have the latency setup on the TI's control panel. Sonar can do anything Cubase can do and better.
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/09/30 18:53:44
(permalink)
post edited by Heroics - 2012/10/01 06:24:52
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 05:47:27
(permalink)
thanx ...its absolutely normal for the sequencer to use a one bar count in ...I have learned ---I am so sorry ! My lack of knowledge has driven my writing hands ! omg
post edited by Heroics - 2012/10/06 20:52:21
|
mattplaysguitar
Max Output Level: -55.5 dBFS
- Total Posts : 1992
- Joined: 2006/01/02 00:27:42
- Location: Gold Coast, Australia
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 05:53:14
(permalink)
You need to calm down, stop multiposting and speak clearly. Maybe someone will be willing to help you then. wtf IS WRON WITH YOU GUYS ....solvE MY ISSUE now
And comments like this won't get you too far.
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 05:56:11
(permalink)
solved ---timing super !
post edited by Heroics - 2012/10/06 20:52:50
|
Kenneth
Max Output Level: -84 dBFS
- Total Posts : 314
- Joined: 2012/08/25 02:25:07
- Location: Denmark
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:12:05
(permalink)
i7 Sandy Bridge K2600 16Gb RAM 3x240GB Intel SSD | Samsung 40" LED Monitor | Win7 Pro 64bit | Saffire Pro 24 | Powercore MKII | Yamaha KX8 88 weighted keys| 2 x Behringer BCR2000 | Octapad SPD30 | Yamaha NS10, Focal Solo 6 BE | Bryston 4B Yamaha p2200 Amps| Sonar X2+Quickfix | EWQLSO Gold | Stormdrum2 | 8DIO Almost everything | Omnisphere | Zebra2 | Prominy V-Metal, SC Guitar, SR5 Bass | VIR2 Electri6ty | Shreddage X | Amplitude 3 | BOME MIDI Translator, Autohotkey
|
JClosed
Max Output Level: -77 dBFS
- Total Posts : 690
- Joined: 2009/12/19 11:50:26
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:12:27
(permalink)
This is a users forum, and no Cakewalk help center. If you need help you better call the Cakewalk custom service. Those guys are friendly and helpful. If you want help from the other users here you have to calm down and stop demanding things - that wont work you know.. Now - if you really want help, give some information about how you exactly did set up the Virus in Sonar, what drivers you are using, if you use DPC, if you use latency compensation etc. And please stop using capitals - this is seen as shouting and wont generate much sympathy amongst the other users here..
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:20:49
(permalink)
again ......why does it work so fine in my cubase ? same PC as I run sonar on ..SAME MOTU ...same the Access will get delayd while recording it in SONAR ....people must know .....I dont belivee people saying the DONT have this problem ,,,my audio PC is best ! I just will have to buy me cubase now ..and its making me angry ! JClosed
This is a users forum, and no Cakewalk help center. If you need help you better call the Cakewalk custom service. Those guys are friendly and helpful. If you want help from the other users here you have to calm down and stop demanding things - that wont work you know.. Now - if you really want help, give some information about how you exactly did set up the Virus in Sonar, what drivers you are using, if you use DPC, if you use latency compensation etc. And please stop using capitals - this is seen as shouting and wont generate much sympathy amongst the other users here..
|
Judah
Max Output Level: -90 dBFS
- Total Posts : 36
- Joined: 2007/09/30 22:36:53
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:21:14
(permalink)
Kenneth
Don't feed it.
+1 LOL
Jesus saith unto him, I am the way, the truth, and the life: no man cometh unto the Father, but by me. John 14:6
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:22:46
(permalink)
what is ur problem ? 10K users in this forum ,can not explain why this "outa synch" thing with access TI is in sonar ? We use TI Judah
Kenneth
Don't feed it.
+1
LOL
post edited by Heroics - 2012/10/01 06:36:58
|
Judah
Max Output Level: -90 dBFS
- Total Posts : 36
- Joined: 2007/09/30 22:36:53
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:25:05
(permalink)
Heroics
WTF is ur problem ????
10K users in this forum ,can not explain why this "outa synch" thing with access TI is in sonar ?
We use TI
Judah
Kenneth
Don't feed it.
+1
LOL
No problem here. Just been around to know that anger and hostility don't get you anywhere. Suprised to see that you still need to learn that. God bless. Judah
Jesus saith unto him, I am the way, the truth, and the life: no man cometh unto the Father, but by me. John 14:6
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:25:43
(permalink)
its not my bad ...( I am not cakewalk ) YOU shall solve stuff! Again there are 10 thousands of Trance warriors out there still using cubase --BECAUSE of this PRECISE ISSUE ! 10----------------------------------4 ????????????????????? ><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< you ALL get some brainstorming ready now .-------- YOU ! THEY are busy programming ! 10- 4 ???????????????? (the people from CAKEWALK) mattplaysguitar
You need to calm down, stop multiposting and speak clearly. Maybe someone will be willing to help you then.
wtf IS WRON WITH YOU GUYS ....solvE MY ISSUE now
And comments like this won't get you too far.
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:28:37
(permalink)
WHAT ?????????????????? BRO ! I WANNA WORK :..AND THERES AN ISSUE OIN MY SONAR X1 ...WHAT HOSTILITY ? I am musician ... NOT a priest ! Judah
Heroics
WTF is ur problem ????
10K users in this forum ,can not explain why this "outa synch" thing with access TI is in sonar ?
We use TI
Judah
Kenneth
Don't feed it.
+1
LOL
No problem here. Just been around to know that anger and hostility don't get you anywhere. Suprised to see that you still need to learn that.
God bless.
Judah
|
JClosed
Max Output Level: -77 dBFS
- Total Posts : 690
- Joined: 2009/12/19 11:50:26
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:29:43
(permalink)
Alright - troll status confirmed. Just shouting without any helpful information confirms it. I wont offer any help anymore...
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:33:46
(permalink)
I HAVE AN ISSUE ...I HAVE (!!!) TO WORK ! you understand ? I tryed now all data from google ON MY SETUP with access TI still i get delays in sonar x1 s recordings of ACCESS TI ....and still the cubase i have 2 use ,because of my friend using it on a tune ; i have NO issues there with ACCESS ....so PLS ACCEPT it and try 2 solve !!!!!!!!! DO NOT ACCUSE PEOPLE OF BEEIN SOMETHING ! 10-4 ....? JClosed
Alright - troll status confirmed. Just shouting without any helpful information confirms it. I wont offer any help anymore...
post edited by Heroics - 2012/10/01 06:40:06
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:51:08
(permalink)
You are not a musician or a priest you are simply rude.
This is a peer to peer forum. What you are doing is offensive to us. If you continue you will be reported. Your issue could have been fixed if you had shown just a little decorum.
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 06:58:58
(permalink)
yes and your community could have grown ...if you accept my "rudenes" -----------Im swiss I can do that ! ; P and yes I am musician ,you seem to be very unfriendly towrds people with great issues in sonar ? well...........good 2 know ....and (noted) ^^ John
You are not a musician or a priest you are simply rude.
This is a peer to peer forum. What you are doing is offensive to us. If you continue you will be reported. Your issue could have been fixed if you had shown just a little decorum.
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 07:12:17
(permalink)
Question, why should I accept your rudeness? Why should anyone? If you are a musician as you claim why would a fellow musician disrupt a peaceful forum that is trying to offer help to fellow other musicians? Again this is a peer to peer forum. Maybe you don't know what that means.
Yelling at us and posting repeated threads on the same subject is highly offensive.
If you calm down and logically relate the problem you are having in a tone that is not abusive we will be very happy to help and fix your problem.
If you are unable to do that, control yourself, you will only get banned.
|
pwal
Max Output Level: -46 dBFS
- Total Posts : 2909
- Joined: 2004/08/24 07:15:57
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 08:16:10
(permalink)
☄ Helpful
|
Heroics
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2012/02/04 14:55:38
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 08:55:16
(permalink)
YO -bros -then sorry fpr my rude writing ....I did not even use curse words ,,you all very ,very well behaving angels ..I FORGOT THAT ! Some just dont want AND cant calm down if they are stopped in workflow .......some are different ! I got realy nervous ,this access cost 1200 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! John
Question, why should I accept your rudeness? Why should anyone? If you are a musician as you claim why would a fellow musician disrupt a peaceful forum that is trying to offer help to fellow other musicians? Again this is a peer to peer forum. Maybe you don't know what that means.
Yelling at us and posting repeated threads on the same subject is highly offensive.
If you calm down and logically relate the problem you are having in a tone that is not abusive we will be very happy to help and fix your problem.
If you are unable to do that, control yourself, you will only get banned.
|
THambrecht
Max Output Level: -73 dBFS
- Total Posts : 867
- Joined: 2010/12/10 06:42:03
- Location: Germany
- Status: offline
Re:ACCESS TI and sonar X1 expanded
2012/10/01 08:56:39
(permalink)
☄ Helpful
I have a similar problem with the Access TI.
It takes up to 2000 ms (2 seconds !!) to hear a sound, by pressing a key. When I record the Access TI to Sonar X2, I can go drinking coffee, before I hear the sound.
I read in german forums that this must be a problem with drivers from Access.
I bought the access TI for a few days and this was my first experience. I still have no solution.
We digitize tapes, vinyl, dat, md ... in broadcast and studio quality for publishers, public institutions and individuals.4 x Intel Quad-CPU, 4GHz Sonar Platinum (Windows 10 - 64Bit) and 14 computers for recording tapes, vinyl ...
4 x RME Fireface 800, 2 x Roland Octa Capture and 4 x Roland Quad Capture, Focusrite .... Studer A80, RP99, EMT948 ...
(Germany) http://www.hambrecht.de
|