APRO;500 WITH FADERPORT

Author
Post
Essentials Only Full Version
rickssonar
Max Output Level: -90 dBFS
  • Total Posts : 17
  • Joined: 2015/01/24 16:01:06
  • Status: offline
2016/10/28 06:11:24 (permalink)

APRO;500 WITH FADERPORT

Hi I have sonar Platinum been using the lApro-500 with act enabled for my control surface I recently purchased the faderport I would like to use both together but the Apro seems to be dominating all the control features such as transport section ,mix, Bank ,excetera when I press on the faderport transport buttons Bank buttons xcetera it does nothing it only works on one track at the most out of 40 the apro 500 dominates the rest.Is it possible to control SPLAT using both controllers in the same session? thanks Rick
#1

12 Replies Related Threads
    azslow3
    Max Output Level: -42.5 dBFS
    • Total Posts : 3297
    • Joined: 2012/06/22 19:27:51
    • Location: Germany
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/28 11:19:08 (permalink)
    That should be possible. In the MIDI/Playback and recording Preferences of Sonar, check that you have not disabled "key aftertouch".
    If still does not work, try to leave FaderPort alone (remove A-Pro form Control Surfaces) to check either the problem is in FaderPort alone (so, not the combination).

    Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro
    GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB
    RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc.
    www.azslow.com - Control Surface Integration Platform for SONAR, ReaCWP, AOSC and other accessibility tools
    #2
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/28 13:00:51 (permalink)
    thanks for responding 
    i did disconnect the apro and faderport worked like advertised but when i run them both the apro takes over again . is there a way to configure them so they both work together? thanks rick
    #3
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/28 13:00:56 (permalink)
    thanks for responding 
    i did disconnect the apro and faderport worked like advertised but when i run them both the apro takes over again . is there a way to configure them so they both work together? thanks rick
    #4
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/28 13:01:06 (permalink)
    thanks for responding 
    i did disconnect the apro and faderport worked like advertised but when i run them both the apro takes over again . is there a way to configure them so they both work together? thanks rick
    #5
    azslow3
    Max Output Level: -42.5 dBFS
    • Total Posts : 3297
    • Joined: 2012/06/22 19:27:51
    • Location: Germany
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/28 14:45:05 (permalink)
    That is strange... I have hard time to guess how they can interfere.
     
    Well, you can try to use my plug-in instead of original for FaderPort: http://www.azslow.com/index.php/topic,163.0.html
    So far there was no reports that A-Pro is not working with other plug-ins, especially I know that some people use it with my (controlling other device). Also there are people which say that FaderPort works with my plug-in better then with original (but some other claim it does not work with my plug-in at all...).
     
    Also make should that Input/Output assignments for both Control Surfaces are correct. So you do not set output of A-PRO to Faderport (just an example). Note that you should have only 2 plug-ins in Control Surfaces, one for each device. If you see more, remove them.

    Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro
    GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB
    RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc.
    www.azslow.com - Control Surface Integration Platform for SONAR, ReaCWP, AOSC and other accessibility tools
    #6
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/28 18:21:13 (permalink)
    thank you azslow3
    after a couple of hours messing about are things working good together . dont know exactly what made the difference but all is good now  .thank you very much 
    #7
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/31 10:19:16 (permalink)
    azlow3 
    i cant find your plugin download on this  link http://www.azslow.com/index.php/topic,163.0.html       were is the download link  i would like to try it . i could not find it on your website also. 
    thanks rick      
    #8
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/31 10:45:41 (permalink)
    i think i found it    AZ CONTROLLER 0.5r2   correct?
    #9
    azslow3
    Max Output Level: -42.5 dBFS
    • Total Posts : 3297
    • Joined: 2012/06/22 19:27:51
    • Location: Germany
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/31 10:53:47 (permalink)
    Near direct download link: http://www.azslow.com/index.php?action=downloads;sa=view;down=28
    Click on the "exe" file to download the installer (no registration required), you can check this video: https://www.youtube.com/watch?v=L5Gl61MvEuQ for installation procedure.
     
    There is some discussion ongoing about Faderport, so please download and install preset from http://www.azslow.com/index.php/topic,163.msg1774.html#msg1774 message (it is attached there) instead of generating it as explained in the first post (how to install separate presets is also shown in the video I have mentioned).
     
     

    Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro
    GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB
    RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc.
    www.azslow.com - Control Surface Integration Platform for SONAR, ReaCWP, AOSC and other accessibility tools
    #10
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/10/31 10:56:20 (permalink)
    thanks i appreciate your help. i will 
    rick
    #11
    singerNow
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2010/06/06 17:18:45
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/11/01 22:33:03 (permalink)
    rickssonar
    thank you azslow3
    after a couple of hours messing about are things working good together . dont know exactly what made the difference but all is good now  .thank you very much 


    Now that you have the faderport working I have a question:  In Sonar Platinum with a touch screen, can you simply touch a fader on the screen to activate that channel for the faderport motorized fader?
    #12
    rickssonar
    Max Output Level: -90 dBFS
    • Total Posts : 17
    • Joined: 2015/01/24 16:01:06
    • Status: offline
    Re: APRO;500 WITH FADERPORT 2016/11/02 11:25:05 (permalink)
    thank you azslow3


     
    Now that you have the faderport working I have a question:  In Sonar Platinum with a touch screen, can you simply touch a fader on the screen to activate that channel for the faderport motorized fader? 
     
    I dont have a touch screen. sorry and i dont know if that is possible in platinum though i have seen it work on some of the youtube videos with other daw i researched before purchasing.
     
    #13
    Jump to:
    © 2024 APG vNext Commercial Version 5.1