nchardy
Max Output Level: -89 dBFS
- Total Posts : 100
- Joined: 2006/08/13 08:47:42
- Location: North Carolina
- Status: offline
After X3C update...Spectrum analyzer not working in QuadCurve EQ
After I installed X3C. I started a project and noticed the specrum analyzer is not working on my quadcurve eq in pro channel. I works on one bus I have inserted. Anyone else have this problem?
I am also getting that noise from the console emulation too!
Sonar...You're killing me!
I can do all things through Christ who strengthens me. Intel i2700k Asrock P67 Extreme 4 Gen-3 Corsiar GS-600 Power Supply 16 GB Corsair Vengeance LP DDR3 LG GH-24 Super-Multi DVD Writer M-Audio Project Mix I/O Focusrite Saffire Pro 40 Presonus Digimax LT M-Audio Axiom 61 Midi Controller Windows 7 64 bit (2) Western Digital Hard drives. Sonar X3 Producer Walmart Lava lamp
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/10/31 22:28:26
(permalink)
|
Andrew Rossa
Max Output Level: -56 dBFS
- Total Posts : 1910
- Joined: 2006/04/14 13:33:18
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/10/31 22:40:38
(permalink)
nchardy
After I installed X3C. I started a project and noticed the specrum analyzer is not working on my quadcurve eq in pro channel. I works on one bus I have inserted. Anyone else have this problem?
I am also getting that noise from the console emulation too!
Sonar...You're killing me!
I haven't heard of an issue with QuadCurve EQ but we can look into it. Re: Console Emulator...is your 64-bit double precision engine check on or off?
|
noynekker
Max Output Level: -66 dBFS
- Total Posts : 1235
- Joined: 2012/01/12 01:09:45
- Location: POCO, by the river, Canada
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/10/31 22:48:18
(permalink)
Quadcurve EQ spectrum analyzer is working normally in my X3c
Cakewalk by Bandlab, Cubase, RME Babyface Pro, Intel i7 3770K @3.5Ghz, Asus P8Z77-VPro/Thunderbolt, 32GB DDR3 RAM, GeForce GTX 660 Ti, 250 GB OS SSD, 2TB HDD samples, Win 10 Pro 64 bit, backed up by Macrium Reflect, Novation Impulse 61 Midi Key Controller, Tannoy Active Near Field Monitors, Guitars by Vantage, Gibson, Yamaki and Ovation.
|
nchardy
Max Output Level: -89 dBFS
- Total Posts : 100
- Joined: 2006/08/13 08:47:42
- Location: North Carolina
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/10/31 22:53:16
(permalink)
64 is checked. I never had a problem with the spectrum analyzer until tonight when I installed the update.
I can do all things through Christ who strengthens me. Intel i2700k Asrock P67 Extreme 4 Gen-3 Corsiar GS-600 Power Supply 16 GB Corsair Vengeance LP DDR3 LG GH-24 Super-Multi DVD Writer M-Audio Project Mix I/O Focusrite Saffire Pro 40 Presonus Digimax LT M-Audio Axiom 61 Midi Controller Windows 7 64 bit (2) Western Digital Hard drives. Sonar X3 Producer Walmart Lava lamp
|
studio343
Max Output Level: -87 dBFS
- Total Posts : 168
- Joined: 2007/06/16 22:34:28
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 00:18:07
(permalink)
I also am not getting the Spectrum Analyzer on the Quad EQ (Prochannel) on my projects. It was showing perfectly in x3b. Works on SOME tracks now.. but very FEW.. most do NOT work. 64 bit IS checked.. and I have rescanned VST's as well just in case.
|
nchardy
Max Output Level: -89 dBFS
- Total Posts : 100
- Joined: 2006/08/13 08:47:42
- Location: North Carolina
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 06:13:14
(permalink)
My analyzer works on some of the busses not tracks.
I can do all things through Christ who strengthens me. Intel i2700k Asrock P67 Extreme 4 Gen-3 Corsiar GS-600 Power Supply 16 GB Corsair Vengeance LP DDR3 LG GH-24 Super-Multi DVD Writer M-Audio Project Mix I/O Focusrite Saffire Pro 40 Presonus Digimax LT M-Audio Axiom 61 Midi Controller Windows 7 64 bit (2) Western Digital Hard drives. Sonar X3 Producer Walmart Lava lamp
|
jb101
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 2011/12/04 05:26:10
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 06:57:33
(permalink)
☄ Helpfulby mettelus 2013/11/02 21:08:09
Do you have 64 bit double precision engine checked in preferences? Try disabling it, close Sonar, and then open it. It should work.
I'm guessing that it is related to the CE bug - something to do with work they've done on vst3, I believe.
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 07:07:08
(permalink)
You have to turn the EQ on. When the EQ is off the spectral analysis does not display.
ByPassing all FX, turning off the Pro Channel on the Track, and turning off the EQ itself will all cause the spectral analysis to not be calculated or shown.
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
anotherpaul
Max Output Level: -90 dBFS
- Total Posts : 11
- Joined: 2012/03/19 04:40:20
- Location: Geelong Australia
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 07:08:21
(permalink)
No go here with my spectrum analyser mainly because the Pro Channel eq won't load
Sonar Platinum X3C Producer X2 A Producer X1D Producer Expanded GIGABYTE 970A-D3 AMD FX 6100 3.3 GHz 8 GB DDR3 Win 10 Home 64 Bit A500Pro Mackie Onyx 1640 with Firewire Card M Audio Mobile Pre M Audio Firewire 410
|
jimst57
Max Output Level: -87 dBFS
- Total Posts : 151
- Joined: 2005/04/01 09:24:23
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 07:10:01
(permalink)
With the 64 bit double precision engine checked the analyzer works on some tracks not on others. With it not checked it works normally.
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 07:12:16
(permalink)
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
anotherpaul
Max Output Level: -90 dBFS
- Total Posts : 11
- Joined: 2012/03/19 04:40:20
- Location: Geelong Australia
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 07:20:15
(permalink)
Thanks gswitz
doesnt matter if I open a new or old project I am getting missing plugin messages all relating to eq
Bus Eq (Bus: 'Master')Track Eq (Track: 'Kick')Track Eq (Track: 'Snare')Track Eq (Track: 'Hats')Track Eq (Track: 'Room Right')Track Eq (Track: 'Bass') etc etc
The eq is there but if you touch a node it disappears
Rescanning doesnt appear to do anything
Tech support time fingers crossed
Sonar Platinum X3C Producer X2 A Producer X1D Producer Expanded GIGABYTE 970A-D3 AMD FX 6100 3.3 GHz 8 GB DDR3 Win 10 Home 64 Bit A500Pro Mackie Onyx 1640 with Firewire Card M Audio Mobile Pre M Audio Firewire 410
|
anotherpaul
Max Output Level: -90 dBFS
- Total Posts : 11
- Joined: 2012/03/19 04:40:20
- Location: Geelong Australia
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 07:57:54
(permalink)
unchecking and rechecking the VST3 Migration options seems to have fixed my issues
Sonar Platinum X3C Producer X2 A Producer X1D Producer Expanded GIGABYTE 970A-D3 AMD FX 6100 3.3 GHz 8 GB DDR3 Win 10 Home 64 Bit A500Pro Mackie Onyx 1640 with Firewire Card M Audio Mobile Pre M Audio Firewire 410
|
rickbail
Max Output Level: -88 dBFS
- Total Posts : 124
- Joined: 2003/11/18 09:33:55
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 08:06:29
(permalink)
Experienced the same problem after updating last night. The bus channels work and some audio tracks. The addictive drum tracks indicated input output values without the spectrum analyzer. Strange, all work fine before the update.
Rick Sonar Platinum Dell Intel Core i7-4790 3.6 processor 12GB SDRAM 1TB Hard Drive NVIDIA GeForce GT 720 Focusrite 6I6 audio interface
|
iTiDav
Max Output Level: -90 dBFS
- Total Posts : 30
- Joined: 2009/02/08 12:38:53
- Location: France
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:13:17
(permalink)
rickbail
Experienced the same problem after updating last night. The bus channels work and some audio tracks. The addictive drum tracks indicated input output values without the spectrum analyzer. Strange, all work fine before the update.
Me too, and only on mono tracks, like the "buzz" of the Console Emulator.
|
rickbail
Max Output Level: -88 dBFS
- Total Posts : 124
- Joined: 2003/11/18 09:33:55
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:25:33
(permalink)
I forgot about the emulator buzz, is that by design? Somewhat loud, I thought I popped the sound module. Sounds OK turned down.
Rick Sonar Platinum Dell Intel Core i7-4790 3.6 processor 12GB SDRAM 1TB Hard Drive NVIDIA GeForce GT 720 Focusrite 6I6 audio interface
|
meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:31:35
(permalink)
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
jb101
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 2011/12/04 05:26:10
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:35:58
(permalink)
If anyone has issues with CE or Quad Curve Analyser, can you please state if you have 64 bit double precision engine checked in preferences. If so, what happens if you un-check it and restart Sonar? Is it working okay?
If you're not having issues, can you also state if you are using 64 bit double precision engine?
|
bobvila
Max Output Level: -88 dBFS
- Total Posts : 102
- Joined: 2008/08/29 12:56:58
- Location: Montana
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:38:59
(permalink)
64 bit checked here and I am having the issues, I'll see what unchecking and restarting does...
www.stumblingfree.com
www.facebook.com/stumblingfree Sonary X3 Producer Edition 64 bit, Windows 7 64, bit, Intel Q9660, 8 GB Ram, Echo Audiofire 12, Edirol PCR-M80, Groove Tubes The Brick, MAudio DMP3, Shure SM7B, Rode NT2A
|
jb101
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 2011/12/04 05:26:10
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:42:28
(permalink)
|
iTiDav
Max Output Level: -90 dBFS
- Total Posts : 30
- Joined: 2009/02/08 12:38:53
- Location: France
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:51:52
(permalink)
For me, bugs are on "double 64" bit checked, and only on mono tracks. Unchecked, all works correctly (ZoomEQ and Console Emulator). On double 64 bits...
post edited by iTiDav - 2013/11/01 09:58:16
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:52:04
(permalink)
The EQ analyzer is working fine so far - the bug that was shutting it down for me in earlier versions seems to have been fixed.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 09:55:53
(permalink)
Can one of you guys PM one of your .cwp's that is experiencing the issue? I'm gonna dive into this today and see what's up.
|
iTiDav
Max Output Level: -90 dBFS
- Total Posts : 30
- Joined: 2009/02/08 12:38:53
- Location: France
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 10:08:05
(permalink)
|
nchardy
Max Output Level: -89 dBFS
- Total Posts : 100
- Joined: 2006/08/13 08:47:42
- Location: North Carolina
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 10:18:41
(permalink)
It was really embarrassing last night. I got home from work and installed X3c, and prepared for a new client to come over. When my new client arrived, I pulled up one of my best projects to play for him. Then it happened! A very nice buzz was coming through my speakers from the console emulator. I managed to track some acoustic guitar for him, and was bragging about X3's features. I had just told him about the new QuadCurve EQ with the spectrum analyzer, and pulled it up on the first guitar track and @%##! it didn't even work! I guess the lessen learned here is never, never, install a new update just before a session!
I can do all things through Christ who strengthens me. Intel i2700k Asrock P67 Extreme 4 Gen-3 Corsiar GS-600 Power Supply 16 GB Corsair Vengeance LP DDR3 LG GH-24 Super-Multi DVD Writer M-Audio Project Mix I/O Focusrite Saffire Pro 40 Presonus Digimax LT M-Audio Axiom 61 Midi Controller Windows 7 64 bit (2) Western Digital Hard drives. Sonar X3 Producer Walmart Lava lamp
|
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 11:03:07
(permalink)
nchardy
It was really embarrassing last night. I got home from work and installed X3c, and prepared for a new client to come over. When my new client arrived, I pulled up one of my best projects to play for him. Then it happened! A very nice buzz was coming through my speakers from the console emulator. I managed to track some acoustic guitar for him, and was bragging about X3's features. I had just told him about the new QuadCurve EQ with the spectrum analyzer, and pulled it up on the first guitar track and @%##! it didn't even work! I guess the lessen learned here is never, never, install a new update just before a session!
Try flipping off the 64bit Double Precision Engine to see if that temporarily alleviates this problem. Edit > Preferences > Audio > Driver Settings
|
nchardy
Max Output Level: -89 dBFS
- Total Posts : 100
- Joined: 2006/08/13 08:47:42
- Location: North Carolina
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 11:20:41
(permalink)
I can do all things through Christ who strengthens me. Intel i2700k Asrock P67 Extreme 4 Gen-3 Corsiar GS-600 Power Supply 16 GB Corsair Vengeance LP DDR3 LG GH-24 Super-Multi DVD Writer M-Audio Project Mix I/O Focusrite Saffire Pro 40 Presonus Digimax LT M-Audio Axiom 61 Midi Controller Windows 7 64 bit (2) Western Digital Hard drives. Sonar X3 Producer Walmart Lava lamp
|
LJB
Max Output Level: -60 dBFS
- Total Posts : 1502
- Joined: 2009/07/29 10:31:31
- Location: South Africa
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 11:22:14
(permalink)
Scratch that, mine is now working fine, 64-precision or not.
post edited by LJB - 2013/11/02 05:45:52
Ludwig Bouwer, One Big Room Studios.
--------------------
Cakewalk with all the trimmings / Win 10Pro 64 / Intel i7-7700 / Asus Prime Z270k / 16GB DDR4 / RME HDSP9652 / RME UFX / Black Lion Audio ADA8000 / ART MPA & ART Pro Channel / Focusrite Voicemaster Pro / Aphex 107
Check out my work at www.onebigroom.co.za
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re: After X3C update...Spectrum analyzer not working in QuadCurve EQ
2013/11/01 13:07:54
(permalink)
Dan Gonzalez [Cakewalk]
Try flipping off the 64bit Double Precision Engine to see if that temporarily alleviates this problem. Edit > Preferences > Audio > Driver Settings
Yes, this appears to solve the problem, but only after the project is reloaded with Double Precision disabled. Enabling Double Precision will precipitate the problem immediately (on some tracks), but disabling it requires a reload for the "cure" to take effect.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|