Audible Pop and Crackle in Sonar X3 Producer in the first 3-4 seconds

Author
Post
Essentials Only Full Version
kmbgood
Max Output Level: -90 dBFS
  • Total Posts : 3
  • Joined: 2016/09/02 14:57:30
  • Status: offline
2016/09/03 12:05:08 (permalink)

Audible Pop and Crackle in Sonar X3 Producer in the first 3-4 seconds

Using Sonar since it's first iteration.  Have upgraded multiple times - currently running X3 producer, windows 7 Ultra - M-Audio Delta 1010 interface.  Audible pop and crackle 3-4 seconds into any new recordings on record and playback.  Began about a month ago. Does not affect any older files recorded prior to the issue nor on the MP3 player, Windows audio player etc.   Hoping someone has some advice on what may be the cause and some resolution.  Thanks.
#1

5 Replies Related Threads
    Zargg
    Max Output Level: 0 dBFS
    • Total Posts : 10666
    • Joined: 2014/09/28 04:20:14
    • Location: Norway
    • Status: offline
    Re: Audible Pop and Crackle in Sonar X3 Producer in the first 3-4 seconds 2016/09/03 16:06:15 (permalink)
    Hi, and welcome to this forum. Which driver mode do you use with your 1010?  
    Are you using 32 bit or 64 bit Windows? 
    I used ASIO drivers when I had mine in Vista and Win 7.
    If you are not using them, I suggest that you switch to ASIO drivers.
    They are found here: http://m-audio.com/support/download/drivers/delta-6.0.8
    Have you tried to increase the (ASIO) latency buffer?
    That is all I had for now.
    Best of luck.

    Ken Nilsen
    Zargg
    BBZ
    Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
    Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
     
    #2
    kmbgood
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2016/09/02 14:57:30
    • Status: offline
    Re: Audible Pop and Crackle in Sonar X3 Producer in the first 3-4 seconds 2016/09/03 16:19:06 (permalink)
     64 bit Windows.  I will try the download you posted - thanks for the response.
     
    #3
    Zargg
    Max Output Level: 0 dBFS
    • Total Posts : 10666
    • Joined: 2014/09/28 04:20:14
    • Location: Norway
    • Status: offline
    Re: Audible Pop and Crackle in Sonar X3 Producer in the first 3-4 seconds 2016/09/03 16:27:37 (permalink)
    You have Win 7 SP1 installed?

    Ken Nilsen
    Zargg
    BBZ
    Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
    Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
     
    #4
    Pragi
    Max Output Level: -67 dBFS
    • Total Posts : 1173
    • Joined: 2010/09/19 11:46:59
    • Location: Village of the sun
    • Status: offline
    Re: Audible Pop and Crackle in Sonar X3 Producer in the first 3-4 seconds 2016/09/04 02:36:31 (permalink)
    Hello and welcome,
    without knowing your system specs it´s 
    hard to help, but I remember having similar problems during the
    time I was recording  with the Audio Delta 1010 le, which is the economy 
    version of your audio interface. The non-symmetric ports didn´t shield
    the voltage network connection.
     
    Are you using symmetric  cables and do you switch off your network  etc during mixing aso ?
     
    regards
    Pragi
     
    post edited by Pragi - 2016/09/04 03:01:16

    http://piet-music.de/
    https://www.youtube.com/w...=ImFlRTzThA8&t=85s
    #5
    kmbgood
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2016/09/02 14:57:30
    • Status: offline
    Re: Audible Pop and Crackle in Sonar X3 Producer in the first 3-4 seconds 2016/09/04 12:38:13 (permalink)
    Thank you will look into that
     
    #6
    Jump to:
    © 2025 APG vNext Commercial Version 5.1