Audio-Cut

Author
Post
Essentials Only Full Version
anorak
Max Output Level: -89 dBFS
  • Total Posts : 52
  • Joined: 2013/09/22 02:19:27
  • Status: offline
2015/05/25 04:29:37 (permalink)

Audio-Cut

Hello,
 
I try to make an Storytelling-Book. So I make a audio record. Sometimes there are parts, I want to cut out.
I take the "cut" Tool, cut the Parts, and then I erase it. After this, I have to move the Part to close the space.
 
My Question is if you can erase and the free space will filled with the Part on the right, so that there is no space between the cutted Parts?
 
The other thing is; when I see that I maybe forgot a part and have to cut him after the whole track is full of small parts, so i have to move all of them back. So, that they ALL move so, that there is no space.
The last question is maybe not so important, because i surely can select the whole part on the right and move them at once. But if Sonar make no space after erase, it is much easier..
 
One thing at last: Because it is no Beat, I shut off the "Snap On" Grid. So it is possible, that there a little free space between tracks, or go over it.
Is there  thing, to "Snap On Audiopart", so that it snap on the point, where the Audio-Part ends/begin?
 

Thanks
 
 
#1

6 Replies Related Threads
    lfm
    Max Output Level: -53 dBFS
    • Total Posts : 2216
    • Joined: 2005/01/24 05:35:33
    • Location: Sweden
    • Status: offline
    Re: Audio-Cut 2015/05/25 05:13:01 (permalink)
    You can use the Cut Special on Edit menu - and check delete hole option.
    #2
    anorak
    Max Output Level: -89 dBFS
    • Total Posts : 52
    • Joined: 2013/09/22 02:19:27
    • Status: offline
    Re: Audio-Cut 2015/05/25 10:03:50 (permalink)
    I seen It Bevor, but it seems to do nothing.. Maybe I check it out a second Time..
    #3
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re: Audio-Cut 2015/05/25 11:43:29 (permalink)
    There needs to something "in the hole" for Delete Hole to work

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #4
    anorak
    Max Output Level: -89 dBFS
    • Total Posts : 52
    • Joined: 2013/09/22 02:19:27
    • Status: offline
    Re: Audio-Cut 2015/05/25 14:01:32 (permalink)
    OK, it works.. As I try it the first time, it seems to do nothing.. So I thought, there must be something else.. :D
     
    But it is very boring always move to the menu and chose "delete special" and say OK to the dialog (or press enter).. Dosn't look like there be a shortcut :(
     
    But it works.
    With "Bounce to clip" i can "glue" the Parts back to one, so i find the answer to my next question on my own :D
    Thanks for help
    #5
    lfm
    Max Output Level: -53 dBFS
    • Total Posts : 2216
    • Joined: 2005/01/24 05:35:33
    • Location: Sweden
    • Status: offline
    Re: Audio-Cut 2015/05/25 14:10:59 (permalink)
    I used two unassigned keys in assigning shortcuts.
     
    Alt-X to Cut Special
    Alt-C to Copy Special
     
    or if you prefer also can be put on Custom Control Bar command buttons - you save one click at least compared to opening a menu first.
     
    There also some good information in help on the subject Insert Time - there is also about Delete too. The need for this things pop up every now and then.
    #6
    scook
    Forum Host
    • Total Posts : 24146
    • Joined: 2005/07/27 13:43:57
    • Location: TX
    • Status: offline
    Re: Audio-Cut 2015/05/25 14:11:09 (permalink)
    You can create your own shortcut for the delete special dialog in Preferences > Customization > Keyboard Shortcuts Global Area search for delete.

    #7
    Jump to:
    © 2025 APG vNext Commercial Version 5.1