AnsweredBapu's (and others) random thoughts for the day.

So close, no matter how far

Sheanes

Mmmmhhh... Becan

I want to be King Midas, but instead of gold, everything I touch turns to becan.

jyoung60
I want to be King Midas, but instead of gold, everything I touch turns to becan.

THAT ^^^^ is the Midas Touch!!
 
Every time I touch Becan, it disappears.....Murphy's Law?

Sheanes

Hogging the forum?

Good morning Ladies, Gents, republicans ,democrats, independents, skinny people, skinny challenged people who can't bend over,intelligent and intelligent challenged ,the wise and the wise challenged..did I get everyone? .....oh and there's Peter over on third and main and that guy who's face I recognize but don't know him from Adam.
 
 

Zargg
Ended up a bit too busy today as well.
After tomorrow, I'll (fingers crossed) have some spare time, and can get some stuff done.
The weekend is free time anyway.
Need to get my (old) car ready for an EU control (is what it's called in Norway. I believe it's the equivalent of an MOT in the UK) this Thursday, that is mandatory for all cars here every 2 yrs.
And I just found a small leak in the turbo's intercooler Not very easy to get parts around here
It's always something, isn't it?
 

Hope you get it squared away ok. Yes it is always something. 

G'd marnin everybody!!
 
It's thirsty Thursday and I've already started..........on java.
 
 
 

It's almost after noon here in Atlantic Canada. Yes, Virginia, there is a time zone beyond yours.  Coffee was had, becan was had, washed down with more coffee with a becan pie for dessert. Then I did some stuff & things for a couple hours, and now I'm here for unknown reasons other than to type this post.  I was up at 7am.  I'm never up at 7am.  Until today.
 
Next Post, you're on! ...

Good day, folks.
It's getting closer and closer to the weekend.

Just noticed.

Where was I?
 

Oh, yes. It's almost weekend, and I have no twerk
Hopefully get some studio time, and finish a couple of projects.

G'day Ken & Co.
 
I'm also hoping to get some studio time this weekend and twerk on some twacks.
Have you tried the new Kuassa amp Caliburn? (3 Marshall amps)
 

Mesh
 
Have you tried the new Kuassa amp Caliburn? (3 Marshall amps)
 

Yar, ees noice.

I've been twerking on twacking for a couple tweeks. First time going 100% non-MIDI for the first time in 30 years.  I feel like a newborn that can't feed himself.

It'll be a learning experience for Shure!!
I need to learn how to use all that midi stuff I have collected throughout the years.

I Am uninformed, non educated, physically inept, and plain ugly. Could someone please bring me up to date on this term TWERK? I do not know what it means in a fred format  

Well..............I think the connotation was actually a word for work. It's CH lingo you know..........but I originally thought it meant what it really meant.  Two butt cheeks pushing the wind back and forth. Don't feel bad they invent new word meanings here on a regular basis.
I'm still looking for Mike.

Ohhhh so twerk means work as in a project. ..  say like "I have a new twerk of art" would mean something like " the new project I Am working on is coming along " ok I get it!
 
 
Butt now I have this image of Hannah Banana in my head at the grammys doing ..well that's just great ..Now I Am all excited THANK YOU VERY MUCH!  
 
 
 
 
 
 
 
 
 
 
and whom's Mike?

who
 

me haves a Shure overhead Mike just not use just lying around so interested gimme a shoot

It is officially Sunday. Welcome.

Good day, Joel and the rest of the crew. It is indeed Sunday.
I've even sent some tracks today(no, not you, NagBap. Not yet).
Will venture another trip into the studio soon, to see what else noise comes from it.

Sheanes
me haves a Shure overhead Mike just not use just lying around so interested gimme a shoot

Generous of you, Sheanes
If no takers, I could use a Mike for other Mike duties than what Mike is being used for at the moment

Mike is used to abuse.

bapu
Mike is used to abuse.

Indeed
Not arse well for classical/acoustic geetar as shouting, though.

Today I have sent the Great Bapu many tracks.
 
And Lo! He is...slightly pleased.
 
Maybe.

jamesg1213
Today I have sent the Great Bapu many tracks.
 
And Lo! He is...slightly pleased.
 
Maybe.

Thank you James for sending that.....one small step for James, saves the rest of us.   
 
BTW, there's some 80's thing going on in here: Hocus_Poke_us

Brewing my own right now. I do miss a female vocalist though.
https://soundcloud.com/starise/alone-again
 
 
 
 

Wow! I wonder if those other forum monkeys know aboot this?
This is a great sound and I luv those vocals. The moog thingy at the end made my day. Luv it! Then came the guitar! Bold guitar with harmony. GREAT SONG! 
I like monkeys and monkeys and saws! 

jamesg1213
Today I have sent the Great Bapu many tracks.
 
And Lo! He is...slightly pleased.
 
Maybe.

Yar he Am.

That synthmaster Daryl is a musical genius.....btw, he likes to be called The Banana King (coz monkeys like banana's??)

bayoubill
Wow! I wonder if those other forum monkeys know aboot this?
This is a great sound and I luv those vocals. The moog thingy at the end made my day. Luv it! Then came the guitar! Bold guitar with harmony. GREAT SONG! 
I like monkeys and monkeys and saws! 

Thanks Bill I appreciate the comment.  I listened again and the mix is a bit much in the mids I think. I'll need to go back and tweak it some more. 
 
Monkeys? Bananas? 

Tim, I've been meaning to listen to your stuff but always get sidetracked at home. Will check it out sometime this week (for Shure!)...no monkeying around.

Thanks Mesh. No hurry. This isn't one of my better ones. Do you make music outside of the forum monkeys?

I do, but haven't completed any of them to post :((...a downside to being mostly a lead guitarist (takes time to get the other tracks down). Hopefully one of these days, I'll get to finishing up a complete song.  
 

I hear ya. I've worn drum patterns out and still can't find the right ones sometimes. I have three drum programs. Been tempted to go down the road 10 miles where there's a drummer who has a decent studio and track something with a decent groove in it. I play with a drummer, but he doesn't have any way to record.
 

The struggle is real?
 

Mornin' all.......my wife asked me how I was doing and I said...meh.....meh.......Mesh!....we are in a real mesh mesh!
How does one get out of a Mesh?

Starise
Mornin' all.......my wife asked me how I was doing and I said...meh.....meh.......Mesh!....we are in a real mesh mesh!
How does one get out of a Mesh?

Oh wow, that's one Meshy situation to be in.
 

He should not mesh with that hair removal method. The moobies act like huge capacitors. Enough to light Manhattan for a week.
 
 
 
 
 
Why is my BS meter pegging again?..........Ok light NY for a month? Gosh the left one might do it.

Good morning and Happy Thursday yall!!
 

Friday Eve it 'tis

Happy Thursday.
 

Top o the mornin' to ya.
 
Hey!! It's FRIDAYYYYY! Always nice to wake to to one of those.

Good morning Tim & Bapu!!
Have you got your Friday shoes on?
 

Not yet Meshers.
 
Still in my undershreddies.
 
TMI?

As long as you don't go out to get the mail (and make sure your windows/blinds are shut), should be ok... 

What's all this in here then?

What's all this in here then?

What's all this in here then?

What's all this in here then?

Oh...Old Skool Loup

Old School Loo

It is Sunday again. Didn't this happen like just a week ago or something?

I have the same feeling, Joel
It's a wet Sunday here, so all the more reason to stay indoors.
Wish Mr. Graine would fully disappear though

Yep Sunday already. Wedding yesterday. Not mine.I walked the bride down the isle. I have pics. Today was my church play date. They had a bunch of stuff blocking the piano from the wedding so I had to bring a keyboard. The drummer had to play guitar because his drums were covered up. A fly-by-the seat of your pants kind of thing.Pulling the violin out tonight for some practice....never a dull moment.

Well, that's a lot more excitement than I had. I couldn't get into the one project I've been trying to finish (in either SPLAT or CbB). It just crashes and had to put in a ticket with the Cake boys.....quite frustrating. Someone said to try renaming the project, but still same result.
 

You can't even get in with Safe Mode?