Greg Lester
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/01/21 21:45:56
- Status: offline
Bark of the dog dump?
I wanted to see what bark of the dog was and when I put it on a prochannel, the entire song started stuttering, then gave the errror "SONAR stopped working." and shut down.
Thanks,
Greg
|
Greg Lester
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/01/21 21:45:56
- Status: offline
Re: Bark of the dog dump?
2015/03/01 20:25:31
(permalink)
Attempted to do it again and same result.
|
Beepster
Max Output Level: 0 dBFS
- Total Posts : 18001
- Joined: 2012/05/11 19:11:24
- Status: offline
Re: Bark of the dog dump?
2015/03/01 20:30:16
(permalink)
Seems to be causing some issues. This happens sometimes with new modules... especially third party ones. I'm sure it will be patched if enough people report it.
|
ArcRex
Max Output Level: -87 dBFS
- Total Posts : 175
- Joined: 2014/03/03 18:32:51
- Status: offline
Re: Bark of the dog dump?
2015/03/01 20:38:44
(permalink)
I was just playing around with Bark of the Dog in the PRO Channel./ It works well for me. When I get stuttering and the sound engine stops I normally find that I pressed the system too much. In the control panel pull up the Performance mod and see if core 1 is High or if it goes into the red when you play. If it does you can go into ASIO and increase the buffer size. I always overload my system. I normally only run required effects while recording with ASIO around 64-92. When I mix, I turn on everything and set ASIO to 4096 because latency doesn't matter when you are only using playback.
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: Bark of the dog dump?
2015/03/01 20:46:52
(permalink)
Theoretically it's just a resonant high pass filter so it shouldn't use too much juice.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
Beepster
Max Output Level: 0 dBFS
- Total Posts : 18001
- Joined: 2012/05/11 19:11:24
- Status: offline
Re: Bark of the dog dump?
2015/03/01 20:52:20
(permalink)
Maybe there's some kind of code loop going on dragging things down. I'm not a programmer though so that is a very uneducated guess.
|
Splat 
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re: Bark of the dog dump?
2015/03/01 22:47:37
(permalink)
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
pencilartist
Max Output Level: -88 dBFS
- Total Posts : 113
- Joined: 2014/10/06 18:06:02
- Location: Hermiston, Oregon
- Status: offline
Re: Bark of the dog dump?
2015/03/02 10:30:43
(permalink)
I have only dropped into individual track Pro Channels, but it works. Beautifully on drums, I must say.
Sonar Platinum, Win10 64bit, i5 with 32gb ram, 480gb SSD C drive, 240gb SSD scratch drive, 2tb Cakewalk project drive, dual 24" monitors, M-Audio M-Track Quad, Event TR8 monitors, Beyerdynamic DT 770 Pro headphones, lots of guitars and other toys.
|
Kamikaze
Max Output Level: -45 dBFS
- Total Posts : 3013
- Joined: 2015/01/15 21:38:59
- Location: Da Nang, Vietnam
- Status: offline
Re: Bark of the dog dump?
2015/03/02 10:56:27
(permalink)
It's a nice partner for the +10db, that lacks shelving filters
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: Bark of the dog dump?
2015/03/02 11:11:34
(permalink)
Kamikaze
It's a nice partner for the +10db, that lacks shelving filters
I didn't buy +10db, so now what do I do with thing? 
|
Beepster
Max Output Level: 0 dBFS
- Total Posts : 18001
- Joined: 2012/05/11 19:11:24
- Status: offline
Re: Bark of the dog dump?
2015/03/02 11:35:22
(permalink)
☄ Helpfulby bapu 2015/03/02 12:31:41
bapu
I didn't buy +10db
I y Ams shocked, SHOCKED at this development (or lack thereof).
|
mrneil2
Max Output Level: -88 dBFS
- Total Posts : 126
- Joined: 2010/06/09 20:57:28
- Status: offline
Re: Bark of the dog dump?
2015/03/18 21:05:18
(permalink)
Where in the Pro Channel should this be placed? After compressors? Before or after the Console Emulator? Any suggestions?
Software:Platinum Computer: HP Envy i7-3770 CPU @ 3.40GHz , 8GB Ram, 64bit Operating System, Windows 10 Western Digital (1TB) External Hard Drive Roland Octa-Capture M-Audio Keystation 88es
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: Bark of the dog dump?
2015/03/19 07:06:38
(permalink)
mrneil2
Where in the Pro Channel should this be placed? After compressors? Before or after the Console Emulator? Any suggestions?
depends ... if you just use it as low cut with settings for no or little resonance (amplitude <=0 ) I'd put it early in the chain ... if you use it to color your sound with resonance at the low cut (which is what it was actually made for) you can place it anywhere in the chain (depending on what FX you have before and after) ... i know this is a fairly general answer, but i think it's totally up to your purpose and your ears
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|