Can Sonar's Master Out be preprogramed?

Author
Post
Essentials Only Full Version
Pepperwood
Max Output Level: -90 dBFS
  • Total Posts : 6
  • Joined: 2015/03/22 13:23:31
  • Status: offline
2016/03/15 10:29:31 (permalink)

Can Sonar's Master Out be preprogramed?

I have Sonar Pro and a Yamaha TF mixer. The mixer is very simple (USB connection) but Sonar can drive me nuts. For example, my Master Out settings won't save, so every time I open the program, or move from song to song, I have to reset the Master Out to the appropriate setting for the mixer. Please tell me what I don't know. Thank you.
 
(I check this post about once a day)
#1

5 Replies Related Threads
    gswitz
    Max Output Level: -18.5 dBFS
    • Total Posts : 5694
    • Joined: 2007/06/16 07:17:14
    • Location: Richmond Virginia USA
    • Status: offline
    Re: Can Sonar's Master Out be preprogramed? 2016/03/15 10:40:03 (permalink)
    Use templates.

    StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
    I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
    #2
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: Can Sonar's Master Out be preprogramed? 2016/03/15 10:47:17 (permalink)
    The Output of the Master bus in all the project templates delivered with SONAR will default to the first stereo output pair presented by the interface driver to the O/S, and enabled in SONAR's preferences.
     
    If you want to use different outputs, just make the change in a new project, and Save As, choosing Save as type 'Template' in the save dialog. You can either save it as a new project template and set that as your default, or save over whichever existing template (.CWT) you used to start it.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #3
    Pepperwood
    Max Output Level: -90 dBFS
    • Total Posts : 6
    • Joined: 2015/03/22 13:23:31
    • Status: offline
    Re: Can Sonar's Master Out be preprogramed? 2016/03/15 11:09:53 (permalink)
    OK, thank you, I'll give that a try. I made a template before but it didn't work out quite like I wanted. I'll give it another shot.
    #4
    Zargg
    Max Output Level: 0 dBFS
    • Total Posts : 10666
    • Joined: 2014/09/28 04:20:14
    • Location: Norway
    • Status: offline
    Re: Can Sonar's Master Out be preprogramed? 2016/03/15 13:31:39 (permalink)
    Hi. Does right click on (working) master bus, and select use as default work?
    Best of luck.

    Ken Nilsen
    Zargg
    BBZ
    Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
    Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
     
    #5
    Pepperwood
    Max Output Level: -90 dBFS
    • Total Posts : 6
    • Joined: 2015/03/22 13:23:31
    • Status: offline
    Re: Can Sonar's Master Out be preprogramed? 2016/03/15 18:20:39 (permalink)
    Thanks, folks. In this case, Brundlefly's comment that "SONAR will default to the first stereo output pair presented by the interface driver" is what worked for me; I turned off all other outputs so SONAR has no choice but to select the channels I want.
     
    But this creates problems so I'll nail down the template suggestions, which, I know, are the best way to go. Thanks again.
    #6
    Jump to:
    © 2025 APG vNext Commercial Version 5.1