CbB Ceases to Work Until I re-boot the software

Author
cpkoch
Max Output Level: -84 dBFS
  • Total Posts : 345
  • Joined: 2014/02/07 17:00:26
  • Location: Edgewater, Florida
  • Status: offline
2018/12/14 23:07:49 (permalink)

CbB Ceases to Work Until I re-boot the software

I have been playing around trying to do an acapella version  of a Christmas Song that I like. I am using Melodyne alot on this experiment so I am not sure the fault I am experiencing is due to CbB or to Melodyne.  What is happening is the functionality of the software seems to quit at times requiring that I save the session,  close CbB, shut down the software, and restart.  After restarting the functionality is once again restored. Occasionally I am getting a Audio Engine error message or a "fatal" shutdown message.  I can get into more details but I am wondering if any one else is experiencing similar issues  with  CbB or is it just my lack of knowledge and bad luck.
 

Sonar Platinum, HP Z210 Desktop PC,  Windows 10  64 Bit, 12  GB RAM,  Steinberg UR22 Interface Unit,  M-Audio Keyboard Studio USB MIDI Keyboard, APEX-TK -Condenser Unidirectional MIC, Audio Technica AT2020 USB MIC
 
#1

5 Replies Related Threads

    ChristopherM
    Max Output Level: -56 dBFS
    • Total Posts : 1921
    • Joined: 2006/08/18 14:31:42
    • Location: UK
    • Status: offline
    Re: CbB Ceases to Work Until I re-boot the software 2018/12/18 11:10:42 (permalink)
    If you have to reboot, I'd make a guess that it's something to do with the drivers for your audio device. Unless you find you are using older drivers for which there is an update, this tentative diagnosis won't do you much good, however. Occasionally, I find that unplugging the USB cable from my Roland Quad Capture will free things up, so I can close Cake and restart without rebooting. On most occasions, I can't avoid the reboot.
     
    #2
    joakes
    Max Output Level: -72 dBFS
    • Total Posts : 905
    • Joined: 2006/12/05 15:51:24
    • Location: 465 Km South West of Paris
    • Status: offline
    Re: CbB Ceases to Work Until I re-boot the software 2018/12/19 06:53:53 (permalink)
    If you’re using Melodyne a lot then i find its better to use it on small vocal parts then bounce to clips after any corrections have been done. I always split my voal parts into short lengths before applying Melodyne.

    This does take some time, but by doing that i’ve never experience your type of problem.

    Good luck,
    Jerry

    Built by yours truely : I7-2600@3.4GHz, Asus P67Z68, W10x64 Creator Edition, 32GB RAM, 3 HD's, nVidia 760 GT, Focusrite 18i20 2,d Gen + Ti FW, Oxygen 61 iv Gen, and Edirol SD-20 (yes it works), CbB, Teles, Strats, LP's, Epi Riviera, etc
    #3
    cpkoch
    Max Output Level: -84 dBFS
    • Total Posts : 345
    • Joined: 2014/02/07 17:00:26
    • Location: Edgewater, Florida
    • Status: offline
    Re: CbB Ceases to Work Until I re-boot the software 2018/12/22 04:59:40 (permalink)
    Thanks, folks, for the feedback!  I have been working on smaller chunks at a time and saving them so that I don't have to start form scratch when I run into a glitch ... which is a fairly frequent occurrence! BY the way the issue does not require a re-boot of the computer.

    Sonar Platinum, HP Z210 Desktop PC,  Windows 10  64 Bit, 12  GB RAM,  Steinberg UR22 Interface Unit,  M-Audio Keyboard Studio USB MIDI Keyboard, APEX-TK -Condenser Unidirectional MIC, Audio Technica AT2020 USB MIC
     
    #4
    msmcleod
    Max Output Level: -72 dBFS
    • Total Posts : 920
    • Joined: 2004/01/27 07:15:30
    • Location: Scotland
    • Status: offline
    Re: CbB Ceases to Work Until I re-boot the software 2018/12/22 10:43:48 (permalink)
    Try deleting AUD.INI from %APPDATA%\Cakewalk\Cakewalk Core 
     
    Cakewalk will recreate it once you restart.
     
    If you're still seeing issues after this, re-install your audio drivers and delete AUD.INI again.
     
     

    Mark McLeod
    Cakewalk by BL | ASUS P8B75-V, Intel I5 3570 16GB RAM Win 10 64 + Win 7 64/32 SSD HD's, Scarlett 18i20 / 6i6 | ASUS ROG GL552VW 16GB RAM Win 10 64 SSD HD's, Scarlett 2i2 | Behringer Truth B2030A / Edirol MA-5A | Mackie MCU + C4 + XT | 2 x BCF2000, Korg NanoKontrol Studio
    #5
    bvideo
    Max Output Level: -58 dBFS
    • Total Posts : 1707
    • Joined: 2006/09/02 22:20:02
    • Status: offline
    Re: CbB Ceases to Work Until I re-boot the software 2018/12/22 15:41:06 (permalink)
    Some users have reported that a message box pops up behind the main window where it can't be seen, and any attempt to operate the main window is futile until the message box is dismissed. You can try your windows tricks (e.g. alt-tab) to see if you can find it.

    W10 pro, Sonar Platinum, Alesis Multimix 16 FW, MOTU Express 128, Gigabyte Z370 HD3P, i7 8700K, 16 Gigs, ssd + 2 X 2T disks, D50-MEX, JV80, A90EX, M1REX
    #6
    Jump to:
    © 2019 APG vNext Commercial Version 5.1