Channels Missing Message On Startup

Author
Post
Essentials Only Full Version
Phonic
Max Output Level: -85 dBFS
  • Total Posts : 291
  • Joined: 2011/04/04 13:13:38
  • Status: offline
2011/04/04 13:27:51 (permalink)

Channels Missing Message On Startup

For some reason every time I load a project Sonar tells me that a few of my tracks are set to silent outputs and that they will not work until these outputs have been re-assigned.  The Master output is included in this list.  I have checked and checked again and there are no incorrectly assigned outputs and everything works correctly when I play back my track, including the Master bus.
 
Any ideas how to solve this?
 
P.S. I must say I am very unimpressed with the amount of bugs in this software.  I have X1b installed and I don't think I will by another Cakewalk product.
 
Thanks,
 
Phonic
#1

7 Replies Related Threads
    Phonic
    Max Output Level: -85 dBFS
    • Total Posts : 291
    • Joined: 2011/04/04 13:13:38
    • Status: offline
    Re:Channels Missing Message On Startup 2011/04/04 20:47:42 (permalink)
    No one has any ideas?  I have not seen this error posted before.

    #2
    chuckebaby
    Max Output Level: 0 dBFS
    • Total Posts : 13146
    • Joined: 2011/01/04 14:55:28
    • Status: offline
    Re:Channels Missing Message On Startup 2011/04/04 21:05:33 (permalink)
    you need to go into your preference menu and select your soundcard under the drivers tab..if you do not have a soundcard hooked up this is the message you get..are you using your computers sound card or an external interface?..put your spec in your signiture or write then out.

    Windows 8.1 X64 Sonar Platinum x64
    Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
    Focusrite Saffire 18I8 - Mackie Control
       
    #3
    Phonic
    Max Output Level: -85 dBFS
    • Total Posts : 291
    • Joined: 2011/04/04 13:13:38
    • Status: offline
    Re:Channels Missing Message On Startup 2011/04/04 23:11:50 (permalink)
    Ok, here are my specs:
     
    Moto 828 mk3 with the latest drivers
    Windows 7 (x64) intel i7 @ 2.8ghz
    6 GB RAM
    Sonar X1B
     
    I do have my Moto selected as my sound card and regardless of the error screen I click OK and it works perfectly.  The error will say "Kick is set to a silent output" - I check the track labelled kick and it is set to Master which is correct and the track plays perfectly.  It also says the Master output is set to a silent output yet it too works properly if I ignore the error.
     
    Any advice?
     
    Thanks!
    #4
    drumr
    Max Output Level: -77 dBFS
    • Total Posts : 683
    • Joined: 2006/04/28 10:37:30
    • Location: Twang Town
    • Status: offline
    Re:Channels Missing Message On Startup 2011/04/05 09:11:17 (permalink)
    I'm getting the same thing on a bass track. weird.
    #5
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re:Channels Missing Message On Startup 2011/04/05 11:31:40 (permalink)
    Do you have any hidden or archived tracks set to a bus which no longer exists?

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #6
    Qwerty69
    Max Output Level: -62 dBFS
    • Total Posts : 1435
    • Joined: 2004/02/19 17:44:10
    • Status: offline
    Re:Channels Missing Message On Startup 2011/04/05 11:45:59 (permalink)
    I'd install the quickfix...

    Q.
    #7
    Mesh
    Max Output Level: 0 dBFS
    • Total Posts : 27360
    • Joined: 2009/11/27 14:08:08
    • Location: Online right here!
    • Status: offline
    Re:Channels Missing Message On Startup 2011/04/05 12:36:46 (permalink)
    I've gotten that error quite a few times after doing some updates to Win or did some software changes and my solution to this is just to re-install the drivers for my soundcard (eventhough the drivers are the latest updated version, I still re-install them).
    This always removes that "Silent Output Error".

    Platinum Gaming DAW: AsRock Z77 Overclock Formula
    I7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X
    250GB OS SSD : 3TB HDD : 1TB Sample HDD
    Win 10 Pro x 64 : NH-D14 CPU Cooler 
    HIS IceQ  2GB HD 7870
    Focusrite Scarlett 2i4
    The_Forum_Monkeys
    #8
    Jump to:
    © 2024 APG vNext Commercial Version 5.1