timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Condenser Mic that won't hear the room
Is there one?
|
Leadfoot
Max Output Level: -47 dBFS
- Total Posts : 2817
- Joined: 2011/04/26 11:08:38
- Location: Indiana
- Status: offline
Re: Condenser Mic that won't hear the room
2017/02/27 19:02:24
(permalink)
Not really. Are you recording vocals? Consider using a dynamic. You could also hang blankets around you to muffle reflections from the room.
|
timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Re: Condenser Mic that won't hear the room
2017/02/28 08:26:23
(permalink)
Yea Bob, Vocals. Or, I could buy a new house.
|
Starise
Max Output Level: -0.3 dBFS
- Total Posts : 7563
- Joined: 2007/04/07 17:23:02
- Status: offline
Re: Condenser Mic that won't hear the room
2017/02/28 10:02:02
(permalink)
Cardoid pattern might help if your mic has that setting. If not cardoid is usually the default. Lowest gain possible that still picks you up well. Closer proximity to mic. If you can't get rid of it, is there a closet close by? You could go in the closet to record.
Intel 5820K O.C. 4.4ghz, ASRock Extreme 4 LGA 2011-v3, 16 gig DDR4, , 3 x Samsung SATA III 500gb SSD, 2X 1 Samsung 1tb 7200rpm outboard, Win 10 64bit, Laptop HP Omen i7 16gb 2/sdd with Focusrite interface. CbB, Studio One 4 Pro, Mixcraft 8, Ableton Live 10 www.soundcloud.com/starise Twitter @Rodein
|
batsbrew
Max Output Level: 0 dBFS
- Total Posts : 10037
- Joined: 2007/06/07 16:02:32
- Location: SL,UT
- Status: offline
Re: Condenser Mic that won't hear the room
2017/02/28 22:31:58
(permalink)
you might want to seriously consider a Shure SM7
|
davdud101
Max Output Level: -69 dBFS
- Total Posts : 1058
- Joined: 2010/07/15 13:30:44
- Location: Detroit, MI
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/01 08:20:36
(permalink)
timidi Yea Bob, Vocals. Or, I could buy a new house.
with all those expenses you could just treat the room all in jest, of the course
Mics: MXL 990, MXL R80, 2 x MXL Tempo XLRs, Cobalt Co9, SM48, iSK Starlight Cans: Hifiman HE4XX, AKG M220 Gear: Cakewalk BBL - PreSonus Firepod - Alesis Elevate 3 - Axiom 49 DAW: Win10, AMD FX-8300, 16GB DDR3
|
patm300e
Max Output Level: -74 dBFS
- Total Posts : 845
- Joined: 2007/09/28 09:14:18
- Location: USA - Maryland
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/01 11:56:25
(permalink)
SPLAT on a Home built i3 16 GB RAM 64-bit Windows 10 Home Premium 120GB SSD (OS) 2TB Data Drive. Behringer XR-18 USB 2.0 Interface. FaderPort control.
|
batsbrew
Max Output Level: 0 dBFS
- Total Posts : 10037
- Joined: 2007/06/07 16:02:32
- Location: SL,UT
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/01 16:37:48
(permalink)
|
Jim Roseberry
Max Output Level: 0 dBFS
- Total Posts : 9871
- Joined: 2004/03/23 11:34:51
- Location: Ohio
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/02 12:26:44
(permalink)
batsbrew you might want to seriously consider a Shure SM7
If you're recording vocals and don't want the room, the SM7b would be a great choice. Doesn't sound bad on guitar/bass cab either...
|
timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/03 22:28:19
(permalink)
Thanks guys. Yea, I've looked the SM7b. Probably the right idea. Gearslutz doesn't appear too keen on it. My studio is really small. I've treated it quite a bit but there is still the computer noise, A/C sometimes etc. Anyway, thanks for the thoughts.
|
JohanSebatianGremlin
Max Output Level: -82 dBFS
- Total Posts : 402
- Joined: 2016/03/17 22:27:15
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/04 03:52:54
(permalink)
I remember reading an article in some musician rag way back when ADAT's and Mackie boards were a new thing. The gist of it was that because of this new technology, now for the first time ever, it was easily possible to achieve recordings where the microphones and the recording media were able to reveal limitations of the room itself. Before this point, the max clarity available in prosumer grade analog tape was simply too insufficient to really reveal just how ****ty your room sounded. So even with the best condenser mics available at the time, the room just didn't matter all the much unless you were spending well north of six figures on all the other gear involved. But then the ADATs and Mackie boards changed all that and suddenly the room mattered. But here's the thing. Since that time, lots of very historically significant recordings have been made on that gear in living rooms and basements using lots of very good condenser mics. Just because you're using a recording media that can reveal the limits of your room doesn't mean you should therefore only use mics that aren't able to reveal the limits of your room. It just means you have to be that much more talented at using the tools to capture as much of the good bits of the recording as possible while at the same time masking the limits of your room. And quite honestly, this is 100% true regardless of whether you're working in studio 1 at Abbey Road or your own basement half bathroom. I mean when you get right down to it, that's exactly what we're talking about here. 'Oh my room sounds like crap so please recommend a mic that won't be able to capture that so accurately.' That's insane. Who in their right mind would want a mic that doesn't capture exactly what goes into it as accurately as possible? Use the best mics you have and best recording gear you have and whatever room you have and find a way to make it all work.
If gear was the determining factor, we would all have a shelf full of Grammies and a pocket full of change. -microapp i7, 32gb RAM, Win10 64bit, RME UFX
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/07 22:29:10
(permalink)
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
Jim Roseberry
Max Output Level: 0 dBFS
- Total Posts : 9871
- Joined: 2004/03/23 11:34:51
- Location: Ohio
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/07 22:45:00
(permalink)
timidi Thanks guys. Yea, I've looked the SM7b. Probably the right idea. Gearslutz doesn't appear too keen on it.
FWIW, I believe most of Michael Jackson's vocals for Thriller were recorded with the SM7b. Sold a few copies...
|
fret_man
Max Output Level: -84 dBFS
- Total Posts : 312
- Joined: 2009/05/14 23:57:37
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/07 23:30:03
(permalink)
This whole idea of condenser mics "hearing" the room more than dynamic mics never made sense to me unless you're talking about frequency response. If it's just sensitivity then reduce the gain of the loud mic and/or increase the gain of the quiet mic until post-gain sensitivity is the same. They should both be just as sensitive, right? It's gotta be a frequency response issue, doesn't it?
|
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
- Total Posts : 26036
- Joined: 2006/09/17 11:23:23
- Location: Everett, WA USA
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/08 01:42:29
(permalink)
Condensers are generally more sensitive than dynamics, due to the tiny mass of the diaphragm you have to move versus the mass of a big coil of copper wire. Common wisdom says you have to use a condenser for quality results, but that just ain't so, especially for male vocals. I think if you have an actual isolated and treated vocal booth, then yeh, use a condenser to get every nuance. But if, like so many hobbyists, you're recording in a bedroom, garage or basement, then you will get better results with a dynamic microphone. And, like Jim noted, an SM7 was used on all of M. Jackson's records. It's basically a hotter version of the SM58 with similar tone. I have a booth with lots of absorption, but after Windows 10 killed my Tranzport it got to be a hassle to record myself back there. So I began experimenting with using my stage mic instead and positioning myself in front of a single baffle next to the computer keyboard. To my surprise, results were not only good, they required less post-processing. Nowadays if I'm recording myself, it's usually a plain ol' '58. The expensive condensers stay in their cases and only get pulled out for acoustic guitars. I'd also add a thumbs up for the Heil that Zargg mentioned. I tried one at NAMM, with the PR40 in one hand and an SM58 in the other. The Heil's larger diaphragm made it incredibly smooth and more sensitive compared to the Shure. The only downside is they're more than 3x the price of a '58. BTW, Shure's got a new dynamic out called the KSM8 that looks really interesting. At $500 it's kinda pricey for a dynamic, but it supposedly has no proximity effect. I'd love to try one. I'm thinking it might be a great studio vocal mic that I could also use on stage.
All else is in doubt, so this is the truth I cling to. My Stuff
|
Jim Roseberry
Max Output Level: 0 dBFS
- Total Posts : 9871
- Joined: 2004/03/23 11:34:51
- Location: Ohio
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/08 23:26:48
(permalink)
fret_man This whole idea of condenser mics "hearing" the room more than dynamic mics never made sense to me unless you're talking about frequency response. If it's just sensitivity then reduce the gain of the loud mic and/or increase the gain of the quiet mic until post-gain sensitivity is the same. They should both be just as sensitive, right? It's gotta be a frequency response issue, doesn't it?
Condenser mics capture more subtle detail. ie: If you have a nice condenser mic... and you have decent monitor level thru a nice set of headphones, you can touch your tongue to your upper pallet... and hear it in startling detail. You won't get that level of detail with a SM58.
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/09 22:16:20
(permalink)
timidi Thanks guys. Yea, I've looked the SM7b. Probably the right idea. Gearslutz doesn't appear too keen on it.
And that's why it's a good idea to ask these questions on other forums. There are a lot of "opinions" on gear slutz. My favourite is how they will even bash companies like Yamaha?? It's just a few very vocal idiots and you can learn to filter out those comments. I have owned many mikes over time. I recently bought a AT 2020 and I do like the way it records my vocals but as said, it not only records my vocals, it records every other grunt, lip smack and gurgling I make. I'm back to my Beta 58 which does the job without all that embarrassing noise. I've got my eye set on a Beta 87A. http://www.shure.com/americas/products/microphones/beta/beta-87a-vocal-microphone
|
jpetersen
Max Output Level: -61 dBFS
- Total Posts : 1499
- Joined: 2015/07/11 20:22:53
- Status: offline
Re: Condenser Mic that won't hear the room
2017/03/12 03:20:02
(permalink)
+1 SM7b (set to flat). Depeche Mode - also shifted some albums
|