Controller 0 and Controller 32 with no bank and patch selection programming

Hi all:
I am trying to program a midi event like this to control my Lexicon reverb via midi.
The midi port and the midi channel already chose the Lexicon and what I want ot use.  In this case port is 4 and midi channel out is 5.
Then Controller 0 needs to be set on 16.
Controller 32 needs to be set on like 99 for example, this is for which user's preset I would like to use.
Is there a way to do this in Sonar X series?
Since Sonar only let you do either controller 0 or controller 32, or normal, i.e. multiply the value in controller 0 by 128 then add that to the valule of controller 32.
I have done the normal, but the Lexicon only changed the factory presets, not the register preset.
Can't do the controllers 0 and 32 together. Shane at Lexcion told me this is what I need to do.  He sent me a picture of PT10 in which he can do controller 0 and controller together.
Thank you all.
dan
 
 

Thanks Steve for helping me out.
What I am talking is Controller 0 and 32 in Patch change.
During the old Sonar days, not the X series, I was able to do that.
Now I don't see that anymore, meaning have both controller 0 and 32 in a patch change in one event.
I will keep trying.
dan