brconflict
Max Output Level: -56.5 dBFS
- Total Posts : 1891
- Joined: 2012/10/05 21:28:30
- Status: offline
Delete Envelope Question (Automation)
In a project, I enabled and used Volume Automation on a track. I decided later I didn't want the automation any longer, deleted the envelope (or Clear All), should the automation of that envelope have stopped? Should I be able to return to making adjustments of the fader without it still reading that deleted Volume envelope? The fader still reads the deleted envelope. It's like I'm forced to either disable 'Read' or automate any new fader adjustments I need to make. Suggestions?
Thanks!
Brian Sonar Platinum, Steinberg Wavelab Pro 9, MOTU 24CoreIO w/ low-slew OP-AMP mods and BLA external clock, True P8, Audient ASP008, API 512c, Chandler Germ500, Summit 2ba-221, GAP Pre-73, Peluso 22251, Peluso 2247LE, Mackie HR824, Polk Audio SRS-SDA 2.3tl w/upgraded Soniccraft crossovers and Goertz cables, powered by Pass-X350. All wiring Star-Quad XLR or Monster Cable. Power by Monster Power Signature AVS2000 voltage stabilizer and Signature Pro Power 5100 PowerCenter on a 20A isolation shielded circuit.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Delete Envelope Question (Automation)
2016/09/03 22:44:56
(permalink)
you may have not totally deleted the envelope.
select the track, click edit/delete special, delete automation.
is this how you did it ?
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
brconflict
Max Output Level: -56.5 dBFS
- Total Posts : 1891
- Joined: 2012/10/05 21:28:30
- Status: offline
Re: Delete Envelope Question (Automation)
2016/09/03 23:22:41
(permalink)
I guess not. I still can't find where to do that. It's certainly hidden from my eyes. Main menu Edit?
Brian Sonar Platinum, Steinberg Wavelab Pro 9, MOTU 24CoreIO w/ low-slew OP-AMP mods and BLA external clock, True P8, Audient ASP008, API 512c, Chandler Germ500, Summit 2ba-221, GAP Pre-73, Peluso 22251, Peluso 2247LE, Mackie HR824, Polk Audio SRS-SDA 2.3tl w/upgraded Soniccraft crossovers and Goertz cables, powered by Pass-X350. All wiring Star-Quad XLR or Monster Cable. Power by Monster Power Signature AVS2000 voltage stabilizer and Signature Pro Power 5100 PowerCenter on a 20A isolation shielded circuit.
|
brconflict
Max Output Level: -56.5 dBFS
- Total Posts : 1891
- Joined: 2012/10/05 21:28:30
- Status: offline
Re: Delete Envelope Question (Automation)
2016/09/03 23:42:18
(permalink)
What I managed to do was manually drag-select the entire envelope and press Del. That seemed to do it.
Brian Sonar Platinum, Steinberg Wavelab Pro 9, MOTU 24CoreIO w/ low-slew OP-AMP mods and BLA external clock, True P8, Audient ASP008, API 512c, Chandler Germ500, Summit 2ba-221, GAP Pre-73, Peluso 22251, Peluso 2247LE, Mackie HR824, Polk Audio SRS-SDA 2.3tl w/upgraded Soniccraft crossovers and Goertz cables, powered by Pass-X350. All wiring Star-Quad XLR or Monster Cable. Power by Monster Power Signature AVS2000 voltage stabilizer and Signature Pro Power 5100 PowerCenter on a 20A isolation shielded circuit.
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: Delete Envelope Question (Automation)
2016/09/04 04:29:39
(permalink)
I normally right-click on the envelope, which evokes a drop-down menu, and select "Delete Envelope". This seems like the easiest method.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: Delete Envelope Question (Automation)
2016/09/04 04:42:19
(permalink)
brconflict
I guess not. I still can't find where to do that. It's certainly hidden from my eyes. Main menu Edit?
Yes, but you have to make sure the track itself is selected first, then it's Edit > Delete Special > Track/Bus Automation This will of course delete ALL of the automation on the track, which might not be what you want. You can also toggle Automation Lanes on/off then like Kev999 says, you can then right click on the envelope itself in the automation lane to delete it, or, in track view without the lanes open, you need to set the Track Edit Filter to Automation > (envelope you want to work with). All envelopes will show as "ghosted" with the Edit Filter set to Clips
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
Klaus
Max Output Level: -84 dBFS
- Total Posts : 320
- Joined: 2009/07/14 07:34:02
- Location: Cologne, Germany
- Status: offline
Re: Delete Envelope Question (Automation)
2016/09/04 14:31:25
(permalink)
brconflict
In a project, I enabled and used Volume Automation on a track. I decided later I didn't want the automation any longer, deleted the envelope (or Clear All), should the automation of that envelope have stopped? Should I be able to return to making adjustments of the fader without it still reading that deleted Volume envelope? The fader still reads the deleted envelope. It's like I'm forced to either disable 'Read' or automate any new fader adjustments I need to make. Suggestions?
Thanks!
"Clear All" removes all nodes of the envelope, so "Delete Envelope" is the way to go as mentioned before.
SONAR Platinum ∞RME HDSPe AIO - Windows 10 64bit - Intel i7 2600K - 16 GB RAM
|