DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
I'm making the jump to x64. I have x86 8.5.3PE and x86 X1b(xyz whatever patch)PE working fine. Dim Pro 1.5 x86 works fine in both 8.5 and X1 (x86) and in 8.5.3 x64. I loaded Dim Pro 1.5 x64 and BOOM crash dumps in 8.5.3 x64.  Is it just me or is Dim Pro x64 ify? TIA
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
LHousehold
Max Output Level: -87 dBFS
- Total Posts : 163
- Joined: 2009/02/02 15:39:04
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/06/17 04:37:04
(permalink)
Dim Pro has been my most stable synth, from what I've experienced. You haven't indicated that you have X1a or X1b patches in your 64 version. You probably did this and know this but just in case, you have to download and install the patch for 64 all over again. Also, I feel compelled to ask why the crash dump is going into a Sonar 8.5 folder, and not an X1 folder. Sorry that I can't help you further.
Windows 7 64 bit Cakewalk Sonar X2 Producer Cakewalk A-500PRO MIDI controller
|
czyky
Max Output Level: -87 dBFS
- Total Posts : 193
- Joined: 2003/11/26 19:22:17
- Location: libertyville, illinois
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/06/17 12:19:20
(permalink)
On my studiocat setup, dim pro is solid in x64....BUT, it's Rapture x64 that crashes for me. (Rapture x32 is solid.) CW support has no answers for me yet.
What, specifically, are you doing at crash time? Loading the synth? Loading a prog? Recording? etc. Is there a common thing that you are up to that the crash happens during? (Boy, is that a convoluted sentence!) For me, Rapture x64 crashes during playback, and some patches seem more crash-prone than others.
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/06/18 19:26:37
(permalink)
LHousehold,
The crash is in 8.5.3 x64, I haven't load X1 x64 yet.
czyky,
I happens when loading some programs.
Thanks
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
czyky
Max Output Level: -87 dBFS
- Total Posts : 193
- Joined: 2003/11/26 19:22:17
- Location: libertyville, illinois
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/06/18 23:26:33
(permalink)
Is it always the same programs that crash Dim Pro? What are they? I can try them here and see if I can recreate or notice something or shrug my shoulders.....
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/06/19 13:09:58
(permalink)
I had a hell of a time getting DimPro to straighten itself out when I went 64 bit. I can't even remember what I did in the end, but I finally got it stable. I do recall lots of uninstaling and re-installing. Sorry I can't be more helpful.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/06/19 15:36:34
(permalink)
czyky,
One program in particular every single time.
Its the top one in the drum sequences, I think.
I'm on the road so I can't load things up to tell you which one exactly.
I won't be back in front of Sonar until June the 28th.
Thanks for the help!
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
Dorset Magic
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 2010/07/07 03:53:17
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/07/16 02:14:55
(permalink)
Tom not sure if this helps but i tracked down a bug which may assist in your issue see http://forum.cakewalk.com/fb.ashx?m=2074837 Just a small change to the setting resolved the issues that i was having - Andy - Dorset Magic
Win 7 Pro 64X - 6Gb DDR III 1333Mhz - Intel i3 - Sonar Producer X1c - Focusrite Saffire Pro 40 firewire audio interface - Inta Audio Pro Music PC -
ATI Radeon HD4350 1024Mb Dual Head - Belkin 3 Port Firewire Card - Texas Instruments Chipset 1394a (TI Chipset)
|
nickory
Max Output Level: -90 dBFS
- Total Posts : 4
- Joined: 2011/07/22 04:04:39
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/07/22 04:37:29
(permalink)
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re:Dim Pro x64 Issues in 8.5.3 Producer, Is it just me?
2011/07/24 18:41:07
(permalink)
Andy,
Thanks for that.
I'm back on the road and will check it out when I return.
Thanks again...
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|