Exporting audio problem

How's your routing inside the project and what are your export settings. MIDI, audio?
We can't have any ideas before we know what you're doing.

First off you should see if its inside or outside your song. After that s accomplished, all you need to do is trace your signal chain from start to finish and see if there is something wrong with it. If you dont see anything wrong with it, i would start replacing some things in it or taking out some things in it until it stops.

It could also be a demo plugin that was never registered or has expired
Cj

I did what CJaysmusic  suggested. It seemed to help.

Thanks. I pinpointed it to the the sonitusfx reverb I was using. that seemed to do The trick.


Just off the top of my head: Is anyone less than happy with the main track interface in CWX1. I find it frustrating, it's hard using a mouse to keep from accidentally moving up or down the track I'm concentrating on. Perhaps it's my mouse, I'm using a dual boot system with the magic mouse that comes with a Mac. It's a great mouse, and boot camp installed all the corredt drivers onto Winows [7], but it's still , hard not too make a move and not slip and go all the way to the tope or bottom of the track list and have to use the side bar to get to where I need to be.

Also, I don't seem to have the option of loading a template with "no tracks or Buses" like in earlier versions of Sonar.

I don't mean to rant, but it makes minor problems harder to spot and solve.

I have a realteck Hi Def audio card (built in) and a Focusrite saffire 6 USB audio card. Sometimes I have to "reload" them into the input and outputs of a track to get them to register a signal.

I didn't instal the X1b. I installed all the other before it though. Does the X1b patch address this?

Thanks.

Sorry for the delayed response.

Bristol_Jonesey


You should:

1. Disable the Realteck
2. Patch to X1b followed by the hotfixes
3. Load up ANY template, delete all tracks & busses and save it as a "Blank" template
4. LIST YOUR ENTIRE SYSTEM SPECS

I have a dual boot system. Thanks for the tip.:)

OS Name          Microsoft Windows 7 Home Premium

Version          6.1.7601 service Pack 1 Build 7601

  Model Name: Mac Pro
  Model Identifier: MacPro5,1
  Processor Name: Quad-Core Intel Xeon
  Processor Speed: 2.8 GHz
  Number Of Processors: 1
  Total Number Of Cores: 4
  L2 Cache (per core): 256 KB
  L3 Cache: 8 MB
  Memory: 13 GB
  Processor Interconnect Speed: 4.8 GT/s
  Boot ROM Version: MP51.007F.B03
  SMC Version (system): 1.39f11
  SMC Version (processor tray): 1.39f11
  Serial Number (system): YM0480Q4EUE
  Serial Number (processor tray): J504702PMCZJB     
  Hardware UUID: 25620A8E-7A2C-5E38-B1F6-6D45C1677A2E

BTW: If you're dual booting, you can just leave the magic mouse and a regular USB mouse always plugged in, and switch between the two as you need to (as long as you've got a spare USB socket).

 I made my own empty rack template.  Just open up a factory template and delete everything then save as a project template.  If you like to always start off with an empty rack then save it with the name Normal and whenever you open cakewalk it will open to an empty rack.   I find it even more powerful though to lay out all your screensets, typical routings and save that as Normal.  Saves me a ton of time....