FaderPort no longer working after latest SPLAT update...

Author
Post
Essentials Only Full Version
yorolpal
Max Output Level: 0 dBFS
  • Total Posts : 13829
  • Joined: 2003/11/20 11:50:37
  • Status: offline
2016/12/01 14:32:38 (permalink)

FaderPort no longer working after latest SPLAT update...

Just updated to the newest SPLAT release.  Oddly it started up with some new screens that had me reset all my audio and midi settings/instruments/control surfaces.  At first it didn't want to see my midi controller keyboard but after several tries finally did. After going through the preferences section and resetting all my audio and midi and surface controllers back to where they were I have everything (Maschine, NanoKontrol, Alesis QS8) working EXCEPT my FaderPort.  It shows up in the control surface screen and my midi controllers but is not working at all.  Any help anyone could give will be greatly appreciated.
 
I suspect these new setup screens are part of the "Lenses" thingy which I haven't discovered yet.  Perhaps not.  In any case, I'd like to have my FaderPort back.  IIRC it was a bee-atch to get working in the first place.
 
Thanks

https://soundcloud.com/doghouse-riley/tracks 
https://doghouseriley1.bandcamp.com 
Where you come from is gone...where you thought you were goin to weren't never there...and where you are ain't no good unless you can get away from it.
 
SPLAT 64 bit running on a Studio Cat Pro System Win 10 64bit 2.8ghz Core i7 with 24 gigs ram. MOTU Audio Express.
#1

6 Replies Related Threads
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re: FaderPort no longer working after latest SPLAT update... 2016/12/01 17:27:12 (permalink)
    I didn't let it change anything I just kept closing out of it if fear of what happened to you. If your using the Azcntrl I'm sure Azlow will assist.

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #2
    yorolpal
    Max Output Level: 0 dBFS
    • Total Posts : 13829
    • Joined: 2003/11/20 11:50:37
    • Status: offline
    Re: FaderPort no longer working after latest SPLAT update... 2016/12/01 18:54:54 (permalink)
    I wouldn't have a clue what either Azcntrl or Azlow is...I am a dimwit.

    Hip me, will ya?

    https://soundcloud.com/doghouse-riley/tracks 
    https://doghouseriley1.bandcamp.com 
    Where you come from is gone...where you thought you were goin to weren't never there...and where you are ain't no good unless you can get away from it.
     
    SPLAT 64 bit running on a Studio Cat Pro System Win 10 64bit 2.8ghz Core i7 with 24 gigs ram. MOTU Audio Express.
    #3
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re: FaderPort no longer working after latest SPLAT update... 2016/12/01 19:08:13 (permalink)
     
    I'll try but I'm always the one needing help.
     
    I'm assuming then you are using the Faderport.dll.
    Try this. At the dos prompt do the following
     
    cd C:\Program Files\Cakewalk\Shared Surfaces\
    type regsvr32 FaderPort.dll
    C:\windows\SysWow64\regsvr32 FaderPort.dll
    you should get a conformation that the Faderport.dll is registered.
     
    Hope this helps.

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #4
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re: FaderPort no longer working after latest SPLAT update... 2016/12/01 19:11:35 (permalink)
    Also in preference midi make sure both key aftertouch and channel aftertouch are checked

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #5
    yorolpal
    Max Output Level: 0 dBFS
    • Total Posts : 13829
    • Joined: 2003/11/20 11:50:37
    • Status: offline
    Re: FaderPort no longer working after latest SPLAT update... 2016/12/01 23:38:27 (permalink)
    Well, I thank you heartily for your help...which I am going to "Google" and try to understand. Honest.

    I do have one more question to aid in my quest..."in preference midi" where?? What??

    Well, heck that was actually two questions wasn't it? I can't even get that right.

    https://soundcloud.com/doghouse-riley/tracks 
    https://doghouseriley1.bandcamp.com 
    Where you come from is gone...where you thought you were goin to weren't never there...and where you are ain't no good unless you can get away from it.
     
    SPLAT 64 bit running on a Studio Cat Pro System Win 10 64bit 2.8ghz Core i7 with 24 gigs ram. MOTU Audio Express.
    #6
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re: FaderPort no longer working after latest SPLAT update... 2016/12/02 08:56:53 (permalink)
    Sorry I should have been more clear on that.
    Look in Prefferences, Midi, Playback and Recording. You will see key aftertouch and channel aftertouch. both should be checked

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #7
    Jump to:
    © 2024 APG vNext Commercial Version 5.1