S.L.I.P.
Max Output Level: -72 dBFS
- Total Posts : 949
- Joined: 2004/07/10 18:00:29
- Status: offline
Feature or bug - blank Pro Channel
When I use to insert an audio track the Pro Channel would be filled in with various components; eq, compressor, console emulation, etc... Now it is blank, but I think I like it that way, so I can fill in what I need as the project progresses.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 14:17:28
(permalink)
You can set up your pro channel how you like it, then right click and choose "Set as default".
this way all your pro channels will open the way you like them set up.
To specify the default ProChannel configuration
1.Insert and arrange the ProChannel modules in the desired order.
2.Do one of the following:
- To specify the default configuration for tracks. Right-click any empty space in a track’s ProChannel and select Set Modules as Default for Tracks on the pop-up menu.
- To specify the default configuration for buses. Right-click any empty space in a bus’ ProChannel and select Set Modules as Default for Buses on the pop-up menu.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
promidi
Max Output Level: -66 dBFS
- Total Posts : 1220
- Joined: 2014/11/21 18:46:39
- Location: South Australia
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 14:55:14
(permalink)
You can configure the default configuration for new tracks. This is done, first by creating a new tracks, and then configure the prochannel in the way you wish to have as your default configuration.
Once you're happy with the configuration, then right click an unused area of the prochannel and from the menu that appears, select "Set Modules as Default for Tracks"
Now whenever you insert a new track, the prochannel for that track will be configured as above.
If you do this for buses, you can set the default configuration for new buses. The default configuration for new tracks is independent for default configuration for new buses.
Windows 10 64bit fully patched, 16 gig ram . PCR-800 Controller. (Working in Win 10 1809 64bit)CPU: i5 4670. Video: Nvidia GTX560ti (latest drivers). Audio IF: Focusrite 2i2 2nd Gen
Internet always on.
Software: Cakewalk by Bandlab (2018.09 B29)
ASIO mode. 24bit 48khz 256 samples Rapture Pro, AAS GS2, VS-3, EP-4, VA-2, Chromophone 2, Z3TA+ 2, Addictive drums 2, Addictive Keys, Mpowersynth (latest), Iris 2, GPO5, Sampletank 3,
|
S.L.I.P.
Max Output Level: -72 dBFS
- Total Posts : 949
- Joined: 2004/07/10 18:00:29
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 15:23:55
(permalink)
Thanks, promidi, I am aware of that. I was just curious, because it was always pre-filled with components when I had added an audio track. Like I said, I think I like it better this way. Thanks again for your response.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 16:14:09
(permalink)
I posted something similar to promidi but it appears the forums software made it magically disappear again.
(no links, nothing)
Its frustrating because I find myself not replying as much as I used to because im not sure if my post is going to be axed or not. its not worth the hassle of writing a decent post to help someone, only to find the work you put in replying is for nothing.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
mrpippy2
Max Output Level: -86 dBFS
- Total Posts : 222
- Joined: 2008/10/03 20:54:06
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 16:35:20
(permalink)
Chuck, I find your posts super-helpful and hate the thought of you posting less because the forum software can be a little glitchy. I've experienced the same thing you have, so I always do a quick Crtl-C (or copy on my phone) before I submit. Then I verify that my post made it, and if not, I just paste and try again. Take a couple extra seconds is all.
Sweetwater Creation Station 250, QuadCore, i5 3.4 Ghz, 2x1TB HD, 16GB RAM, Windows 10 64 bit, Sonar Platinum 64 bit, Focusrite 2i2
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 17:09:46
(permalink)
mrpippy2
Chuck, I find your posts super-helpful and hate the thought of you posting less because the forum software can be a little glitchy. I've experienced the same thing you have, so I always do a quick Crtl-C (or copy on my phone) before I submit. Then I verify that my post made it, and if not, I just paste and try again. Take a couple extra seconds is all.
thanks for the kind words my friend, In this particular case it was posted, 20 minutes later I noticed it gone.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
pwalpwal
Max Output Level: -43 dBFS
- Total Posts : 3249
- Joined: 2015/01/17 03:52:50
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 17:16:39
(permalink)
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Feature or bug - blank Pro Channel
2017/08/28 18:20:45
(permalink)
Check, your post has been restored. It was put in limbo by the Akismet spam filters. Please see the thread I started about this.
|