Finally got through install... almost with a need to replace my NS10 speakers ;-)

Author
Post
Essentials Only Full Version
lanstrad
Max Output Level: -84 dBFS
  • Total Posts : 313
  • Joined: 2004/02/15 14:32:09
  • Location: Montreal, Canada
  • Status: offline
2005/06/06 22:30:32 (permalink)

Finally got through install... almost with a need to replace my NS10 speakers ;-)

Finalized installation of Project 5, profiled WDM drivers, was able to play a few of the content (sample content within the program), but when I tried to ran some of them (Taboo Style especially), I got a monster noise terrific enough that if I had had the volume just a bit higher, I would have busted my NS10s ! No joke !....

For another sample, it was the same : I then ran again PROFILE WDM in the audio section (I use a Dakota sound card). In PLAYBACK bit depth, I selected NORMAL as I was getting no sound at all when it setted automatically at 32 LSB (or MSB, I can't recall).

Any help in fine tuning my setup will be appreciated.

Thanks,
Rob
#1

7 Replies Related Threads
    Rednroll
    Max Output Level: -80 dBFS
    • Total Posts : 537
    • Joined: 2004/09/17 13:31:13
    • Status: offline
    RE: Finally got through install... almost with a need to replace my NS10 speakers ;-) 2005/06/07 15:57:15 (permalink)
    This sounds like the similar thing I'm experiencing with my Echo Gina sound cards. I had similar sounds coming out when I tried to use the ASIO driver or the wave driver. The funny thing to me is that sometimes it would work using the MS sound mapper driver, which is an unacceptable driver to have to use in my opinion. If you find a solution, please post back.
    #2
    lanstrad
    Max Output Level: -84 dBFS
    • Total Posts : 313
    • Joined: 2004/02/15 14:32:09
    • Location: Montreal, Canada
    • Status: offline
    RE: Finally got through install... almost with a need to replace my NS10 speakers ;-) 2005/06/07 21:57:45 (permalink)
    Not sure I will get any reply here...

    I will contact Frontier Design and let you know what they suggest, in any case it could be helpful to you as well.

    Rob
    #3
    Dave Modisette
    Max Output Level: 0 dBFS
    • Total Posts : 11050
    • Joined: 2003/11/13 22:12:55
    • Location: Brandon, Florida
    • Status: offline
    RE: Finally got through install... almost with a need to replace my NS10 speakers ;-) 2005/06/08 15:04:11 (permalink)
    Not sure I will get any reply here...

    I will contact Frontier Design and let you know what they suggest, in any case it could be helpful to you as well.


    Was this a loud blast of white noise? My Dakota doesn't like Asio with P5V2. WDM plays nicely. I'd also would like to hear what Frontier has to say.

    <Additional info> My white noise blasts were in SONAR with P5V2 rewired in and recording in loop mode. About the second or third iteration, I get the noise.
    post edited by Mod Bod - 2005/06/08 15:08:31

    Dave Modisette ... rocks a Purrrfect Audio Studio Pro rig.
    http://www.gatortraks.com 
    My music.
    ... And of course, the Facebook page. 
    #4
    wrench45us
    Max Output Level: -25.5 dBFS
    • Total Posts : 4991
    • Joined: 2003/11/06 15:57:01
    • Status: offline
    RE: Finally got through install... almost with a need to replace my NS10 speakers ;-) 2005/06/08 15:51:22 (permalink)

    anybody else concerned about the changes in Mod Bod's appearance since he started working in P5?
    is this what the virtual reality of the Remix Hotel is all about?


     


    #5
    lanstrad
    Max Output Level: -84 dBFS
    • Total Posts : 313
    • Joined: 2004/02/15 14:32:09
    • Location: Montreal, Canada
    • Status: offline
    RE: Finally got through install... almost with a need to replace my NS10 speakers ;-) 2005/06/08 17:26:15 (permalink)
    I would say a VERY LOUD white noise...

    #6
    zipdigital
    Max Output Level: -86 dBFS
    • Total Posts : 218
    • Joined: 2004/12/01 08:53:48
    • Status: offline
    RE: Finally got through install... almost with a need to replace my NS10 speakers ;-) 2005/06/08 17:32:55 (permalink)
    I got this with my ASIO drivers on my EMU sound card - but I was also running with a 5ms latency - when I drop back to 10 and even 20MS, the sound clears up because my CPU isn't having a heart attack keeping such a low latency with that many instances of Dimension. When you get this blast of noise, what percentage is your CPU at? If you're around 90%, you'll probably start getting popping and clipping - if you're above 90% I'd assume you'll get a blast of speaker agony.

    -Sol

    "If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year, killing everyone inside." Robert X. Cringely
    #7
    Dave Modisette
    Max Output Level: 0 dBFS
    • Total Posts : 11050
    • Joined: 2003/11/13 22:12:55
    • Location: Brandon, Florida
    • Status: offline
    RE: Finally got through install... almost with a need to replace my NS10 speakers ;-) 2005/06/09 16:49:49 (permalink)
    anybody else concerned about the changes in Mod Bod's appearance since he started working in P5?
    is this what the virtual reality of the Remix Hotel is all about?


    It's a new spiritual state. Right now I'm channeling Phil Spectacle.

    Dave Modisette ... rocks a Purrrfect Audio Studio Pro rig.
    http://www.gatortraks.com 
    My music.
    ... And of course, the Facebook page. 
    #8
    Jump to:
    © 2024 APG vNext Commercial Version 5.1