The Buzz

Author
Post
Essentials Only Full Version
Hawky
Max Output Level: -80 dBFS
  • Total Posts : 530
  • Joined: 2004/11/08 22:44:57
  • Status: offline
2007/07/09 12:09:57 (permalink)

The Buzz


I am using SONAR 6.2 and I am getting this weird sound occasionally when I stop then start again. It appears the audio engine is not stopping when the spacebar is pressed the first time. When I stop the audio engine this goes away. This appears to happen no matter how big the project is. Any ideas? Also, I just went from a P4 2.6 GHz processor and an ASUS P4P800 to the system below for different reasons but this problem followed along.


1. Hard Drives : C:\ Western Digital 160 gig / SATA 12 gig partition for OS and SONAR
D:\ Western Digital160 gig / SATA 2 Stores Picture Cache
E:\ Western Digital 300 gig / SATA 2 – SONAR Audio Data file
RAM : 2.0 gig Kingston DDR2

2. Processor / Speed: Pentium D 935/ 3.2 GHz 800 MHz FSB 2x2 L2 Cache

3. Motherboard: Gigabyte 965P-S3 – FSB 1333

4. Soundcard: Lynx Two B

I/O buffer = 512 and ASIO panel = 512

Thanks,

Hawky
#1

2 Replies Related Threads
    tecton
    Max Output Level: -79 dBFS
    • Total Posts : 575
    • Joined: 2005/03/07 07:34:07
    • Location: Melbourne, Australia
    • Status: offline
    RE: The Buzz 2007/07/13 15:41:28 (permalink)
    Can you try WDM drivers at all?

    Are there and new driver and or firmware releases from Lynx you can download and try?

    Don't Fight The Physics.

    #2
    Hawky
    Max Output Level: -80 dBFS
    • Total Posts : 530
    • Joined: 2004/11/08 22:44:57
    • Status: offline
    RE: The Buzz 2007/07/13 15:52:06 (permalink)

    The WDM drivers don't work as well with the Lynx card. So, I am not sure if this occurs using WDM. Also, I have the latest and greatest drivers loaded from Lynx. The SONAR help says this will happen when there is a large project going but this seems to happen on any project.

    Thanks,

    Hawky
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1