No sound from U-control

Hello,

I'm using a Behringer U-Control UCA202 with Sonar 7 PE. Sonar is recognizing the device, but there is no sound running through Sonar when the U-Control is configured (No input or output). Check out my Audio Settings


I disabled the on board Realtek sound card, and I installed the latest driver from Behringer. Other programs (Windows Media Player) are able to use the U-Control as an output device, so the problem seems to be at Sonar.

Any suggestions would be much appreciated.

Yes, I noticed that myself. Every time I change the record latency to Behringer, it automatically goes back to asio the next time I open the audio options.

This is driving me crazy... I just want to get back onto recording!

From a user review on amazon.com:

"The UCA202 has a headphone jack with a volume control so you can monitor what's being recorded to your computer, as you record it. Just be aware that you won't be able to listen to the playback from your audio recording software through your computer's monitor speakers unless you unplug this device from your USB port first, and there is no warning about this in the manual, which is why the 4 star review instead of 5. On some review sites there seemed to be confusion about what drivers were required to work with this device, but the first page of the manual states clearly that you don't need any drivers. I am running Windows XP and was able to just plug and play, no drivers needed, audio is loud and clear. By the way this is not a paid endorsement or anything, I just wanted to spare someone else a lot of the research time that I spent by saying, go ahead and get it. "

Maybe this is the source of your problem?

Ok, step back and take a swig of what ever you have in house. Then, go into options/audio and list the settings and do the same for the advanced menu also.
When thats done, you need to list your outputs for the tracks and master.
Do this and well see what your doing wrongCj

Now when I press play, I get a popping noise. When I increase the latency, I can hear a few milliseconds of audio. Then the audio stops, and I get the "dropout" warning. The project is basic and does not require much memory. The same thing happens when I try to record. Also, the "run/stop audio engine" button is in the off position, and I cant turn it on.

-In the Behringer audio driver menu, the default is 16 bit, and It cant be changed. (It's a 16bit interface)
-I disabled the read and write cache
-I experimented with several different buffer sizes
-I tried several projects, and even created a new one with no plugins, but still no luck.

I appreciate your help.

In the Behringer audio driver menu, the default is 16 bit, and It cant be changed. (It's a 16bit interface)

Return it. 24bits is a must in todays recording. for now youll need to change soanr to 16bits in the general menu then
Cj

Behringer is hit asnd miss. could you get it working? Maybe. would it work good ? Maybe. With an edirol, Motu, Echo or RME, yuo will get it working and it will work good
CJ