Problem loading projects with FL Studio as VSTi, DXi and Rewire

Author
Post
Essentials Only Full Version
Bigdogs
Max Output Level: -83 dBFS
  • Total Posts : 378
  • Joined: 2010/01/10 13:16:23
  • Location: Reading, UK
  • Status: offline
2010/03/24 17:34:24 (permalink)

Problem loading projects with FL Studio as VSTi, DXi and Rewire

When I open a project that uses FL Studio 9 inside Sonar PE 8.53, I get a popup from FL saying Save changes to untitled.flp? If I click no, FL Studio loads with nothing in the playlist. If I click Cancel, it loads with the contents I saved previously, but it doesn't remember the folder or flp filename.

Same thing happens with DXi or Rewire.

When I used to do this using Project 5, FL Studio would load without any intervention on my part,

Is this the same for other users?


Sonar Platinum 64 bit, Windows 10 64 bit, i5 4670K Haswell Processor,  4.2GHz, 8Gb RAM, Focusrite Scarlett 2i4, AMD Radeon R7 260X, 120GB Samsung 840 EVO SSD, 1000GB 7200RPM Hard Disk     
#1

3 Replies Related Threads
    Jim Wright
    Max Output Level: -66 dBFS
    • Total Posts : 1218
    • Joined: 2004/01/15 15:30:34
    • Status: offline
    Re:Problem loading projects with FL Studio as VSTi, DXi and Rewire 2010/03/24 18:51:22 (permalink)
    >> When I used to do this using Project 5, FL Studio would load without any intervention on my part,

    Did you do this under Windows 7 64 bit?  Or under XP 32 bit, or ??

    Rewire simply doesn't work with 64-bit software (and it's up to Propellerheads to fix that - Cakewalk doesn't own Rewire and can't change the Rewire spec).  I see in your sig that you're using Sonar 8.5 PE 32 bit, and it's possible that Rewire might work with 32 bit software running under a 64-bit OS - I Googled a bit, and found conflicting reports.

    This thread might be helpful: http://www.soundsonline-f...showthread.php?t=23232

    I'm not running 64-bit Windows -yet - so I can't test any Rewire scenarios directly.

    Good luck,
    Jim
    #2
    Bigdogs
    Max Output Level: -83 dBFS
    • Total Posts : 378
    • Joined: 2010/01/10 13:16:23
    • Location: Reading, UK
    • Status: offline
    Re:Problem loading projects with FL Studio as VSTi, DXi and Rewire 2010/03/25 02:58:27 (permalink)
    Thanks for your suggestions. As you spotted, I'm using 32 bit Sonar, and Rewire works properly except for the file loading issue. The same thing happens when I use VST or DXi, so I don't think it's a problem just with Rewire.

    #3
    blakjustice30
    Max Output Level: -89 dBFS
    • Total Posts : 70
    • Joined: 2010/01/08 18:06:36
    • Location: Farmington Hills, MI.
    • Status: offline
    Re:Problem loading projects with FL Studio as VSTi, DXi and Rewire 2011/01/28 10:31:47 (permalink)
    That explains it, I use Sonar X1 64 bit and rewire with FL studio never works, it's annoying to have to "2 track" songs into sonar instead of using rewire. I need to find a way to control all my instruments from a  FL session with Sonar, that would make mixing alot easiser. Until then, I will continue the prehistoric route.


    M~BLAK,

    Windows 7 64Bit /Multi Core/ 4 Gig Ram/1TB HD
    Sonar X1 Studio
    Protools LE
    FL 10 Producer Edition
    Avalon 737 SP Compressor 
    M-Audio Ultra 8   
    Presonus Digital Mixer
    M Audio Ultra 8 (Interface)
    Waves Diamond Bundle (and a host of midi controllers, synths and other outboard compressers and Mic preamps and  )




    #4
    Jump to:
    © 2024 APG vNext Commercial Version 5.1