Helpful ReplyGetting latency down/monitoring/avoiding dropouts...

Author
Twigman
Max Output Level: -38.5 dBFS
  • Total Posts : 3667
  • Joined: 2006/08/24 04:45:15
  • Location: United Kingdom of Great Britain & Northern Ireland
  • Status: offline
2010/07/21 08:36:31 (permalink)

Getting latency down/monitoring/avoiding dropouts...

OK so this is my rig:
 
Asus P5QL-E motherboard - onboard sound disabled
Q9550 CPU
4Gb 1066 RAM
Win XP Pro SP3 32bit
Sonar 7 producer
RME HDSP9632 soundcard running latest RME drivers in ASIO mode.
 
The smallest buffer I seem to be able to use before suffering dropouts is 1024...on a 24/44.1 project this creates an audible latency when monitoring.
As soon as I reduce the buffer below this I start to suffer dropouts.
 
What else should i be looking at?

Become a Fan on Facebook
Buy our stuff on iTunes
Q9550-P5QL-E-8GB1066RAM-GT9800 1GB-RME HDSP9632-W7Prox64-X2x64
#1
brundlefly
Max Output Level: 0 dBFS
  • Total Posts : 14250
  • Joined: 2007/09/14 14:57:59
  • Location: Manitou Spgs, Colorado
  • Status: offline
Re:Getting latency down/monitoring/avoiding dropouts... 2010/07/21 10:11:00 (permalink) ☄ Helpful
Sounds like a DPC latency problem. Download the checker below, and see what it says:

http://www.thesycon.de/deu/latency_check.shtml 

#2
thomasabarnes
Max Output Level: -43 dBFS
  • Total Posts : 3234
  • Joined: 2003/11/11 03:19:17
  • Location: Milwaukee, WI USA
  • Status: offline
Re:Getting latency down/monitoring/avoiding dropouts... 2010/07/21 10:13:40 (permalink) ☄ Helpful
Hi Twigman:
 
RME audio interfaces are known to be good interfaces capable of running with stable low latency settings. I don't have one but there are a number of regular forum members who do, and they may chime in here sooner or later.
 
To eliminate the problem being a device driver, on Yahoo or Google, search the DPC Latency Checker and download it. Run it to see if you get any readings that spike into the red areas of the chart. If you do, there is a device driver not behaving good.
 
By disabling devices in Device Manager one by one, you can troubleshoot to see which device driver may be the culprit.
 
Make sure the main system drivers for your system are up to date, such as motherboard, audio interface, and graphics card. Also check to see if there is a BIOS update for the motherboard which you can try.
 
Some things that may be contributing to the problem are:
 
-Wireless network adapters
-Enabled Power Management features in the BIOS
-An untweaked operating system 
-Adjusting the playback and record buffer sizes in Options\Audio Advanced tab
 
Hope this helps.
post edited by thomasabarnes - 2010/07/21 10:29:04


"It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant.

SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
#3
Jump to:
© 2024 APG vNext Commercial Version 5.1