Robin Kelly [Roland]
Genuinely Swell Guy
- Total Posts : 571
- Joined: 2003/11/07 10:04:44
- Status: offline
Edit filter and Drag and Drop tips
This was featured in the last email blast. In case you did not get it here are a few tips on SONAR X1 for you. Edit Filter Drag and Drop projects and templates These techniques apply to all three versions of SONAR X1. Robin
That's my blog Omnia illa et ante fiebant, Omnia illa et rursus fient.
|
djjhart@aol.com
Max Output Level: -53.5 dBFS
- Total Posts : 2189
- Joined: 2008/10/24 08:45:46
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 10:31:37
(permalink)
Is it possible to copy and paste a written automation to another parameter?
Computer - Intel Q9550, Intel BX48bt2 MB, W8 64 bit. 8 gb Ram, SSD Hardware - Tascam Fw1884 Control surface only, Ni S49 Komplete Kontroll,Roland Quad Capture, Ni Machine,Kore, Focusrite A/D converter, Blue Mic, Roland Gaia, Akai Mpk49, Yamaha HS80 Monitors.Software - Sonar Platinum , Vengeance VPS bundle,Sugar Bytes Effectrix, Turnado, NI Komplete 10 Ultimate, Dune, Rob Papen Blade , Delay, Punch Evolved. http://soundcloud.com/johnhartson/tracks http://www.youtube.com/user/jhart1313
|
vintagevibe
Max Output Level: -51 dBFS
- Total Posts : 2446
- Joined: 2003/12/15 21:45:06
- Location: Atlanta, Ga
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 10:44:26
(permalink)
Why do all my samplers reload all their loaded samples when I save a track template? (Sometimes causing a crash.)
|
Resonant Order
Max Output Level: -78 dBFS
- Total Posts : 647
- Joined: 2003/12/02 13:45:33
- Location: Austin, Texas
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 11:46:00
(permalink)
Why do all my samplers reload all their loaded samples when I save a track template? (Sometimes causing a crash.) The samples are either loaded into RAM for use, or streamed directly off disc. That's simply the way they operate. There's no way they could be saved in the template.
"After silence, that which comes nearest to expressing the inexpressible is music." Music at Night, 1931- Aldous Huxley
|
vintagevibe
Max Output Level: -51 dBFS
- Total Posts : 2446
- Joined: 2003/12/15 21:45:06
- Location: Atlanta, Ga
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 15:08:19
(permalink)
But even samplers that are not included in the track template do this.
|
ba_midi
Max Output Level: 0 dBFS
- Total Posts : 14061
- Joined: 2003/11/05 16:58:18
- Location: NYC
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 15:09:36
(permalink)
Robin Kelly [Cakewalk ] This was featured in the last email blast. In case you did not get it here are a few tips on SONAR X1 for you. Edit Filter Drag and Drop projects and templates These techniques apply to all three versions of SONAR X1. Robin Yum :)
|
frankandfree
Max Output Level: -82 dBFS
- Total Posts : 447
- Joined: 2008/04/26 11:56:32
- Location: Norddeutschland
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 17:39:04
(permalink)
Somehow related question: Is it possible to drag 'n' drop stuff into the browser as well? Like drag (one or several) tracks into the browser to save a track template or drag a plugin into the browser to save a preset? You get the idea, that'd be quite awesome.
|
ba_midi
Max Output Level: 0 dBFS
- Total Posts : 14061
- Joined: 2003/11/05 16:58:18
- Location: NYC
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 19:05:33
(permalink)
frankandfree Somehow related question: Is it possible to drag 'n' drop stuff into the browser as well? Like drag (one or several) tracks into the browser to save a track template or drag a plugin into the browser to save a preset? You get the idea, that'd be quite awesome. That would be very cool. But more of a niceity.
|
Resonant Order
Max Output Level: -78 dBFS
- Total Posts : 647
- Joined: 2003/12/02 13:45:33
- Location: Austin, Texas
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/20 19:24:15
(permalink)
But even samplers that are not included in the track template do this. So you're saying that your samplers are crashing? If so, then make a thread about it and I'm sure you can get some help. The CAS latency being set wrong in the BIOS is the usual culprit for samplers crashing. I use NI's Battery and Kontakt a ton, and they never crash out Sonar unless I accidentally load a wrong patch puts me over the RAM limit.
"After silence, that which comes nearest to expressing the inexpressible is music." Music at Night, 1931- Aldous Huxley
|
frankandfree
Max Output Level: -82 dBFS
- Total Posts : 447
- Joined: 2008/04/26 11:56:32
- Location: Norddeutschland
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/21 07:12:13
(permalink)
ba_midi That would be very cool. But more of a niceity. But a nice one . In a sense, the whole drag and drop-ability (if not any workflow enhancements you can think of) can be called "more of a niceity". Anyway, it's just a question that struck me. It would be a great, intuitive way to save all kinds of stuff. Find a nice place in the internal browser and drop your FX chain in. Type a name - done. Drag and drop from the browser is sooo last decade . (Just pulling legs here, all in all I am very impressed by what we know by now about changes in X1. They addressed exactly my main niggles with Sonar and that's a great thing for sure.) Maybe it's even possible and they just left it out of the announcements to save a huge WOW for release day.
|
Brandon Ryan [Roland]
Max Output Level: -40.5 dBFS
- Total Posts : 3458
- Joined: 2003/11/06 03:29:12
- Location: Los Angeles, CA
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/21 10:21:31
(permalink)
No drag and drop to Browser - yet.
"The sky above the port was the color of television, tuned to a dead channel." WG SONAR Platinum | VS-700 | A-800 PRO | PCAL i7 with SSD running Windows 8 x64 | Samsung 27" LCD @ 1920x1080 | Blue Sky monitors with BMC | All kinds of other stuff
|
Living Room Rocker
Max Output Level: -77 dBFS
- Total Posts : 675
- Joined: 2009/09/16 22:10:24
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/21 11:10:45
(permalink)
Robin Kelly [Cakewalk ] This was featured in the last email blast. In case you did not get it here are a few tips on SONAR X1 for you. Edit Filter Drag and Drop projects and templates These techniques apply to all three versions of SONAR X1. Robin Brandon Ryan [Cakewalk ] No drag and drop to Browser - yet. Thanks for the links, Robin. I noticed in the drag and drop tip that the track template did not include a track folder. Since I prefer to have my synth audio tracks in a single folder and my synth MIDI track in its separate track (out side of the folder), will track templates include track folders this time around or might that be an added feature in the near future? Thanks in advance. Kind regards, Living Room Rocker Living in a van down by the river.
Kind regards, Living Room Rocker
|
frankandfree
Max Output Level: -82 dBFS
- Total Posts : 447
- Joined: 2008/04/26 11:56:32
- Location: Norddeutschland
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/21 11:16:40
(permalink)
... - yet. Sounds good enough to me for now. Thanks a lot for the answer.
|
elle
Max Output Level: -88 dBFS
- Total Posts : 139
- Joined: 2003/11/14 18:22:34
- Location: Berlin
- Status: offline
Re:Edit filter and Drag and Drop tips
2010/11/22 11:53:35
(permalink)
does it mean that one cannot simply drag'n'copy/drag'n'move more than one automation envelope at a time? meh..
|