Cakewalk by BandLab
Prev Thread
Next Thread

Reccomendations for Phono Pre-amp

Author
Post
Essentials Only Full Version
guster4598
Max Output Level: -90 dBFS
  • Total Posts : 18
  • Joined: 7/24/2010
  • Status: offline
January 02, 11 9:47 AM (permalink)

Reccomendations for Phono Pre-amp

Hi,

I recently purchased a Sony PS-LX300 USB stereo turntable and a pair of Bose stereo speakers. The speakers have RCA inputs in the back, and when I went to plug the turntable directly into the speakers, it worked, but the volume was very low because the speakers don't have pre-amps in them. I really don't want to spend the money for a receiver, so I was looking for a preamp which I could use to plug the turntable into the speakers and listen to it at a good volume.

Is a preamp what I need? and what phono pre-amps would you recommend that would give me a good-quality output to my speakers? Thanks so much if you can help
post edited by guster4598 - January 02, 11 9:50 AM
#1

4 Replies Related Threads
    Zuma
    Max Output Level: -80 dBFS
    • Total Posts : 525
    • Joined: 1/13/2006
    • Location: SoCal...High and dry in LA
    • Status: offline
    Re:Reccomendations for Phono Pre-amp January 02, 11 10:25 AM (permalink)
    Yes. A phono preamp is needed. I'm not a DJ so I can't give you a brand recommendation but that is indeed what you need. They're pretty cheap, so you should be able to pick up a decent one for $20 or $30.

    http://zumajunction.bandcamp.com/

    "the bus came by and I got on that's when it all began. There was cowboy Neal at the wheel of a bus to never ever land."_



    #2
    gustabo
    Max Output Level: -49.5 dBFS
    • Total Posts : 2591
    • Joined: 1/5/2009
    • Status: offline
    Re:Reccomendations for Phono Pre-amp January 02, 11 11:29 AM (permalink)


    Turn on this crazy little ice cream truck and set it on an album and it plays as it follows the vinyl grooves.
    The stylus is underneath.
    The album plays through the little speaker on the top of the truck.
    The headlights light up as it plays.
    (from Sylvia Massy's gear stories on FB)
    post edited by gustabo - January 02, 11 11:31 AM


    Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
    M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
    Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
    Adam A7X - Behritone C50A
    PreSonus Monitor Station v2 (controlling the mons)
    https://www.facebook.com/groups/sonarusergroup/

    #3
    MarlboroMan23
    Max Output Level: -75 dBFS
    • Total Posts : 776
    • Joined: 8/20/2005
    • Location: Lil' D Texas
    • Status: offline
    Re:Reccomendations for Phono Pre-amp January 02, 11 1:40 PM (permalink)
    As long as the speakers are powered all you need is this.

    http://pro-audio.musician...hono-Preamp?sku=180641

    $39.95 + free shipping.

    I've had one for a few years and it works just fine.  You definitely need a phono preamp for the RIAA equalization curve.

    most authors of novels regarded as classics are dead, classic novels are, therefore, most likely to be written by dead people.
    http://www.soundclick.com/opaquesounds
    #4
    guster4598
    Max Output Level: -90 dBFS
    • Total Posts : 18
    • Joined: 7/24/2010
    • Status: offline
    Re:Reccomendations for Phono Pre-amp January 02, 11 4:06 PM (permalink)
    I went with the Art preamp and it sounds amazing, it is exactly what I needed.

    Thanks for the help
    #5
    Home » [The Studio] » Hardware » Reccomendations for Phono Pre-amp
    Jump to:
    © 2025 APG vNext Commercial Version 5.1