ontime
Max Output Level: -90 dBFS
- Total Posts : 46
- Joined: 2009/10/05 12:28:50
- Status: offline
Sonar X1: Create new stereo bus and assign audio track output to it
Last night I plugged in a new Cakewalk UA25EX and microphone into X1 excitedly. I was getting microphone input through the Master with no problems. But then I decided to route it via a new bus.
In Sonar X1 I right clicked in the busses pane and chose "Insert new stereo bus". I gave it a name "mybus".
Then, I clicked on my audio track. On the left hand side I clicked on the "output" which was currently set to "Master". It would not offer me the option of assigning the track's output to "mybus" - in fact it didn't even list "mybus" as an option.
I'm confused.. what was I doing wrong? Any ideas?
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:06:51
(permalink)
Does mybus have an output?
|
ontime
Max Output Level: -90 dBFS
- Total Posts : 46
- Joined: 2009/10/05 12:28:50
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:08:11
(permalink)
John
Does mybus have an output?
Yes, Master.
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:11:40
(permalink)
And you are sure that you clicked the out of your audio track? It should list all possible outs for that track. Is it possible that you accidentally clicked on a MIDI's track out.
|
ontime
Max Output Level: -90 dBFS
- Total Posts : 46
- Joined: 2009/10/05 12:28:50
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:17:42
(permalink)
I'll have another go tonight. I was pretty certain I was clicking on the output for the audio track. At any rate a MIDI track shouldn't go to Master. It's a bit of a mind shift having to hunt for track options on the left hand side of the screen when they used to be available in the track itself... I'm wondering if I'm not beginning to become a bit of an old 8.5.3 miser too..
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:36:24
(permalink)
I'm not saying it is a bug yet but it could be one. I tried and it listed the new buss even though I set it to none. I can't think of any reason it wouldn't.
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:37:52
(permalink)
You can insert a bus in many ways:
1. Insert menu select Insert Stereo Buss
2. In Console View - right click in a blank area of the bus pane
3. In the Multi dock select the Bus menu and Insert Stereo buss
to direct the channel to a bus
Select the track you want to direct to a bus i
1. In the Inspector - , Left Click the output widget and choose which ever bus you want to connect to.
2. In track view Expand the track till you see the Output widget and again left click and choose the bus you want
3. In Console View left click on the Output widget and choose the bus you want.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
ontime
Max Output Level: -90 dBFS
- Total Posts : 46
- Joined: 2009/10/05 12:28:50
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:43:35
(permalink)
Thanks for your help guys. I think I did these things but it's entirely possible I did something wrong. I'll double check tonight and post my answer.
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 06:47:20
(permalink)
Mike are you thinking a buss wasn't made? That never occurred to me.
|
Jesse G
Max Output Level: -32.5 dBFS
- Total Posts : 4282
- Joined: 2004/04/14 01:43:43
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 14:22:27
(permalink)
Ontime, Try the bus creation again. Create a buss and name it My bus. Now on the audio track select new bus and you should see the bus name of "My Bus" listed in the output options. If it doesn't show there is something wrong. I know my list doesn't change some times so therefore, I see Bus 1 listed instead of what I name the bus. Look for the Generic name of Bus and the number (Bus 1, Bus 2...) Peace
post edited by Jesse G - 2011/01/05 14:24:24
Peace,Jesse G.  A fisher of men <>< ==============================Cakewalk and I are going places together!
Cakewalk By Bandlab, Windows 10 Pro- 64 bit, Gigabyte GA-Z97X-SLI, Intel Core i5-4460 Haswell Processor, Crucial Ballistix 32 GB Ram, PNY GeForce GTX 750, Roland Octa-Capture, Mackie Big Knob, Mackie Universal Controller (MCU), KRK V4's, KRK Rockit 6, Korg TR-61 Workstation, M-Audio Code 49 MIDI keyboard controller.[/
|
Clint Swank
Max Output Level: -87 dBFS
- Total Posts : 178
- Joined: 2008/08/04 14:29:51
- Location: Ithaca, NY
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/05 14:27:30
(permalink)
I think it is a bug. It only seems to work in Console view. So go to CV and assign it at the bottom of the strip. Not in Inspector, I don't think it works there.
tunes: http://www.soundclick.com/ClintSwank HP 1520t I7 3770 8GIG ram Seagate 180g & 1TB extHD 7200 RPM, Zoom R-16 USB int, Fishman Triple Play guitar-midi interface, Alesis RA 300 power amp, Audix 1A monitors, Frankenstrat, old Martin, Godin LGXT
|
ontime
Max Output Level: -90 dBFS
- Total Posts : 46
- Joined: 2009/10/05 12:28:50
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/06 04:18:27
(permalink)
Hi all, I tried it again last night, and it worked, no hitches at all! I think I might have just been using it in one of its moods. It could be due to a number of factors - that it saw the UA25EX for the first time ever, or that I changed audio modes, I don't know.
What I do know is that if I create a stereo bus while playing back a track it won't appear as a valid audio track out until I stop playback. However that wasn't the issue I had the other night. Never fear, if I encounter the problem again I'll just restart Sonar X1.
Thanks all!
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/06 06:50:53
(permalink)
ontime
John
Does mybus have an output?
Yes, Master.
Don't be so subservient - it's only John. Only kidding - glad you got it to work
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2011/01/06 07:40:34
(permalink)
subtle but funny - did anyone else get it?
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
losguy
Max Output Level: -20 dBFS
- Total Posts : 5506
- Joined: 2003/12/18 13:40:44
- Location: The Great White North (MN, USA)
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2013/03/26 20:20:56
(permalink)
<removed - sorry - wrong cross-post>
|
digi2ns
Max Output Level: -48.5 dBFS
- Total Posts : 2694
- Joined: 2010/11/24 14:27:12
- Location: MICHIGAN
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2013/03/26 21:14:15
(permalink)
Kinda sounds like you were selecting from the Inspector which possibly had a different Track or Buss selected at the time listing its outputs?
I have done it in the past, think I have a track Im working on up on the Inspector-be looking at a track in track view and it would be the buss on the Inspector cause it was the last thing I actually touched bringing it up/keeping it on the inspector.
Make sense?
Where exactly were you making the selection from , Inspector on the left of Track View, Track View, Console View, etc...
MIKE --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64 --X1 64 Pro Expanded, Dual 21" Monitors --PCR500 --MAUDIO FastTrack Ultra --Mackie 1604 VLZ PRO --Line6 X3 Live --Gibson, Fender, Takamine, Schecter, Washburn http://pogopoppa.wix.com/5thgear# http://soundcloud.com/digi2ns
|
digi2ns
Max Output Level: -48.5 dBFS
- Total Posts : 2694
- Joined: 2010/11/24 14:27:12
- Location: MICHIGAN
- Status: offline
Re:Sonar X1: Create new stereo bus and assign audio track output to it
2013/03/26 21:21:22
(permalink)
Disregard - I didn't realize it was an old solved posting LOL Carry on 
MIKE --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64 --X1 64 Pro Expanded, Dual 21" Monitors --PCR500 --MAUDIO FastTrack Ultra --Mackie 1604 VLZ PRO --Line6 X3 Live --Gibson, Fender, Takamine, Schecter, Washburn http://pogopoppa.wix.com/5thgear# http://soundcloud.com/digi2ns
|