djjhart@aol.com
Max Output Level: -53.5 dBFS
- Total Posts : 2189
- Joined: 2008/10/24 08:45:46
- Status: offline
Moving automation ?
I'm working on something that I noticed I could of use a few more bar in the beginning. So I selected all, and drag everything which worked fine except the automation that was written in the bus lane, I was ok with it as long as I can copy the automation in another step and drag it , but when I dragged everything over all the bus automation was erased completely .. Is there a work around? I tried opening another saved number of the track to copy the automation onto that while having two projects open, That resulted in a run time error crash . There's gotta be an easy way ..or is that how it is Thanks John
Computer - Intel Q9550, Intel BX48bt2 MB, W8 64 bit. 8 gb Ram, SSD Hardware - Tascam Fw1884 Control surface only, Ni S49 Komplete Kontroll,Roland Quad Capture, Ni Machine,Kore, Focusrite A/D converter, Blue Mic, Roland Gaia, Akai Mpk49, Yamaha HS80 Monitors.Software - Sonar Platinum , Vengeance VPS bundle,Sugar Bytes Effectrix, Turnado, NI Komplete 10 Ultimate, Dune, Rob Papen Blade , Delay, Punch Evolved. http://soundcloud.com/johnhartson/tracks http://www.youtube.com/user/jhart1313
|
ba_midi
Max Output Level: 0 dBFS
- Total Posts : 14061
- Joined: 2003/11/05 16:58:18
- Location: NYC
- Status: offline
Re:Moving automation ?
2011/02/03 12:00:27
(permalink)
djjhart@aol.com I'm working on something that I noticed I could of use a few more bar in the beginning. So I selected all, and drag everything which worked fine except the automation that was written in the bus lane, I was ok with it as long as I can copy the automation in another step and drag it , but when I dragged everything over all the bus automation was erased completely .. Is there a work around? I tried opening another saved number of the track to copy the automation onto that while having two projects open, That resulted in a run time error crash . There's gotta be an easy way ..or is that how it is Thanks John THere is a pretty serious Bus automation bug where the data gets deleted, as you've discovered, via a copy/paste operation -- and obviously other operations now too. It's one reason I can't use X1 until they fix some of these bugs.
|
djjhart@aol.com
Max Output Level: -53.5 dBFS
- Total Posts : 2189
- Joined: 2008/10/24 08:45:46
- Status: offline
Re:Moving automation ?
2011/02/03 12:07:53
(permalink)
:( Thats not cool. Thanks for the heads up Billy..
Computer - Intel Q9550, Intel BX48bt2 MB, W8 64 bit. 8 gb Ram, SSD Hardware - Tascam Fw1884 Control surface only, Ni S49 Komplete Kontroll,Roland Quad Capture, Ni Machine,Kore, Focusrite A/D converter, Blue Mic, Roland Gaia, Akai Mpk49, Yamaha HS80 Monitors.Software - Sonar Platinum , Vengeance VPS bundle,Sugar Bytes Effectrix, Turnado, NI Komplete 10 Ultimate, Dune, Rob Papen Blade , Delay, Punch Evolved. http://soundcloud.com/johnhartson/tracks http://www.youtube.com/user/jhart1313
|
Lowline
Max Output Level: -89 dBFS
- Total Posts : 67
- Joined: 2009/12/03 08:52:36
- Status: offline
Re:Moving automation ?
2011/02/03 12:14:47
(permalink)
This is a bug that's been around for a while though, it definitely exists in 8.5. It's a real PITA.
|
ba_midi
Max Output Level: 0 dBFS
- Total Posts : 14061
- Joined: 2003/11/05 16:58:18
- Location: NYC
- Status: offline
Re:Moving automation ?
2011/02/03 12:16:19
(permalink)
Lowline This is a bug that's been around for a while though, it definitely exists in 8.5. It's a real PITA. The question is -- will it be fixed in X1B.
|
Lowline
Max Output Level: -89 dBFS
- Total Posts : 67
- Joined: 2009/12/03 08:52:36
- Status: offline
Re:Moving automation ?
2011/02/03 12:21:03
(permalink)
I suspect its a long way down the list of priorities.
|
djjhart@aol.com
Max Output Level: -53.5 dBFS
- Total Posts : 2189
- Joined: 2008/10/24 08:45:46
- Status: offline
Re:Moving automation ?
2011/02/03 12:22:21
(permalink)
cool found a way. I just have to a insert measure at 1.0.0.0 for as many times I want, Of course you have to select all, and the automation did follow ... To do this go to the tab thats says projects , scroll down you'll see the option there. just make sure you select all , and all your automation will follow.
post edited by djjhart@aol.com - 2011/02/03 12:34:15
Computer - Intel Q9550, Intel BX48bt2 MB, W8 64 bit. 8 gb Ram, SSD Hardware - Tascam Fw1884 Control surface only, Ni S49 Komplete Kontroll,Roland Quad Capture, Ni Machine,Kore, Focusrite A/D converter, Blue Mic, Roland Gaia, Akai Mpk49, Yamaha HS80 Monitors.Software - Sonar Platinum , Vengeance VPS bundle,Sugar Bytes Effectrix, Turnado, NI Komplete 10 Ultimate, Dune, Rob Papen Blade , Delay, Punch Evolved. http://soundcloud.com/johnhartson/tracks http://www.youtube.com/user/jhart1313
|
ba_midi
Max Output Level: 0 dBFS
- Total Posts : 14061
- Joined: 2003/11/05 16:58:18
- Location: NYC
- Status: offline
Re:Moving automation ?
2011/02/03 12:30:43
(permalink)
djjhart@aol.com cool found a way. I just have to insert measure at 1.0.0.0 for as many times I want of course had to select all and the automation did follow ... It's great you found a workaround, but it's kind of a strange way for a DAW 2.0 host to manage it ;)
|
ba_midi
Max Output Level: 0 dBFS
- Total Posts : 14061
- Joined: 2003/11/05 16:58:18
- Location: NYC
- Status: offline
Re:Moving automation ?
2011/02/03 12:31:32
(permalink)
Lowline I suspect its a long way down the list of priorities. If that's true, it's kind of a bad deal. Data being 'deleted' should be WAY up high on a fix list.
|
djjhart@aol.com
Max Output Level: -53.5 dBFS
- Total Posts : 2189
- Joined: 2008/10/24 08:45:46
- Status: offline
Re:Moving automation ?
2011/02/03 12:45:30
(permalink)
For what just happen to me is not a big deal I found an easy way to do it in fact probably the correct way to insert blank measures , Although the selecting all and dragging shouldn't erase all your bus automation, thats an issue that needs to be looked into because I actually wasted hrs working and saving as I go along on a track that lost all my bus automation which I did not know until several hours/saves later, Now I have to go back and re-do the work , Oh well A learning experience. I now know how to insert blank measures..
Computer - Intel Q9550, Intel BX48bt2 MB, W8 64 bit. 8 gb Ram, SSD Hardware - Tascam Fw1884 Control surface only, Ni S49 Komplete Kontroll,Roland Quad Capture, Ni Machine,Kore, Focusrite A/D converter, Blue Mic, Roland Gaia, Akai Mpk49, Yamaha HS80 Monitors.Software - Sonar Platinum , Vengeance VPS bundle,Sugar Bytes Effectrix, Turnado, NI Komplete 10 Ultimate, Dune, Rob Papen Blade , Delay, Punch Evolved. http://soundcloud.com/johnhartson/tracks http://www.youtube.com/user/jhart1313
|