allenheresy
Max Output Level: -90 dBFS
- Total Posts : 43
- Joined: 2011/01/25 04:05:34
- Status: offline
[Report Submitted] Pro-Channel Pre/Post
X1b still wont remember if it is turned on or off each time I load the project. So, I have to manually go through the project and toggle the buttons (doesn't matter what colour they are). Anyone else confirm?
post edited by allenheresy - 2011/03/23 03:44:42
|
A1MixMan
Max Output Level: -58 dBFS
- Total Posts : 1706
- Joined: 2003/11/19 16:15:11
- Location: SunriseStudios
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/22 00:26:51
(permalink)
I thought that was one of the fixes in X1b? That sucks if it's true. Now I gotta go and read the big bug list. Thanks... 
|
skullsession
Max Output Level: -57.5 dBFS
- Total Posts : 1765
- Joined: 2006/12/05 10:32:06
- Location: Houston, TX, USA
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/22 07:29:11
(permalink)
SEEMS to be working correctly here.
HOOK: Skullsessions.com / Darwins God Album "Without a doubt I would have far greater listening and aural skills than most of the forum members here. Not all but many I am sure....I have done more listening than most people." - Jeff Evans on how awesome Jeff Evans is.
|
wilqen
Max Output Level: -89 dBFS
- Total Posts : 74
- Joined: 2006/09/26 22:02:35
- Location: Eastern Oregon
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/22 08:40:04
(permalink)
Will Intel Core i7 3820, 16GB DDR3, Emu 1212m, 1.6+TB HDs WIN 7x64, SONAR ext X1d, Vegas Pro 11, Sound Forge Pro 10c, various others
|
cmusicmaker
Max Output Level: -52 dBFS
- Total Posts : 2328
- Joined: 2004/01/18 08:21:47
- Location: UK
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/22 10:45:36
(permalink)
Hmmm the Pro Channel POST toggle appears to work while you work in a project but...save, close SONAR and reload the project and while the button state (colour) is saved. The routing state here is not.
It seems to switch back to PRE. I need to spend some more time on it as there may be something I am missing here. But it seems to not be able to save the Pro Channel POST state properly once you reload a song.
|
allenheresy
Max Output Level: -90 dBFS
- Total Posts : 43
- Joined: 2011/01/25 04:05:34
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/22 23:52:30
(permalink)
cmusicmaker
Hmmm the Pro Channel POST toggle appears to work while you work in a project but...save, close SONAR and reload the project and while the button state (colour) is saved. The routing state here is not.
It seems to switch back to PRE. I need to spend some more time on it as there may be something I am missing here. But it seems to not be able to save the Pro Channel POST state properly once you reload a song.
There ya go, Nailed it. This is exactly my issue. Only when I re-load a project does it happen. So far it has happened on all my projects in X1a and X1b, so I know it isn't related to when it was saved. However, I am glad they got the modules working properly at least.
|
dwcaldwell
Max Output Level: -86 dBFS
- Total Posts : 234
- Joined: 2009/02/05 22:58:35
- Location: Texas
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/23 03:12:24
(permalink)
allenheresy, I can also confirm this behavior. The Pre/Post button's graphical state is saved, but the actual signal routing state of the ProChannel plug-in is not. That's really the worst possible scenario. Not only is the signal routing state not saved (bad enough), it no longer matches the graphical state of the button. I submitted a problem report.
post edited by dwcaldwell - 2011/03/23 03:14:26
|
subtlearts
Max Output Level: -53.5 dBFS
- Total Posts : 2200
- Joined: 2006/01/10 05:59:21
- Location: Berlin
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/23 04:24:07
(permalink)
goodness me. that's not a great scenario at all.
|
dlesaux
Max Output Level: -70 dBFS
- Total Posts : 1034
- Joined: 2009/09/13 09:25:18
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/23 05:28:09
(permalink)
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/23 07:18:19
(permalink)
I'd urge everyone to check this as I first thought it was working for me and then I took a much closer look and it is indeed as alanheresy and dwcaldwell say.
It is indeed the worst possible scenario in that what appears to be saved is infact not saved at all.
That really sucks.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/23 07:29:42
(permalink)
I made my Prochannel settings and saved them as a preset but on saving the project and reloading it while the Pre Post button showed the same as was saved all the elements of ProChannel were turned off when in fact they were all turned on when the preset then the project were saved.
I had to load a different preset and then reload my own saved preset to return the settings to their proper state.
man what a lot of futzing around.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
kb420
Max Output Level: -57 dBFS
- Total Posts : 1839
- Joined: 2004/04/03 18:27:44
- Location: Philadelphia PA
- Status: offline
Re:Pro-Channel Pre/Post
2011/03/23 09:28:55
(permalink)
dwcaldwell
allenheresy, I can also confirm this behavior. The Pre/Post button's graphical state is saved, but the actual signal routing state of the ProChannel plug-in is not. That's really the worst possible scenario. Not only is the signal routing state not saved (bad enough), it no longer matches the graphical state of the button. I submitted a problem report.
If you can't trust what you are seeing, than that really is the worst possible scenario.
"Now, excuse me while I jump into my Jaguar; I need to board my private jet for the usual weekend trip to my mansion on the Big Island. I think Trixie, Crystal, and Heather are already there...must not keep them waiting in the hot tub!" -Craig Anderton-
|