konradh
Max Output Level: -42 dBFS
- Total Posts : 3325
- Joined: 2006/01/16 16:07:06
- Status: offline
Kits for Session Drumer 3
Is it possible to buy additional acoustic drum kits for Session Drummer 3 from Cakewalk or a third party? There are lots of drum samples around, but it would be great to have some sets that integrate with SD3 features and show up in the kit selection.
I am personally interested in acoustic kits, but I'm sure there is a market for all types.
|
Fog
Max Output Level: 0 dBFS
- Total Posts : 12302
- Joined: 2008/02/27 21:53:35
- Location: UK
- Status: offline
Re:Kits for Session Drumer 3
2011/04/17 18:12:32
(permalink)
They do, once you buy em.. you'll see them listed within SD3.. you can make your own , if you get versed with SFZ .. and use the other kits SFZ to give you pointers.. http://www.store.cakewalk...ory.aspx?CategoryID=82 I made up patches previously for DP.. using existing samples from Music Radar's site maybe 1+ years ago (that was 26 kits)
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re:Kits for Session Drumer 3
2011/04/17 18:19:08
(permalink)
i want to say cake is having a sale on them right now..its a session drummer 3/three pack.for cheap too..go to the cakestore..i just looked for the link cause i seen it earlier.no find
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re:Kits for Session Drumer 3
2011/04/17 18:28:20
(permalink)
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
Dave Modisette
Max Output Level: 0 dBFS
- Total Posts : 11050
- Joined: 2003/11/13 22:12:55
- Location: Brandon, Florida
- Status: offline
Re:Kits for Session Drumer 3
2011/04/17 21:39:30
(permalink)
konradh
Is it possible to buy additional acoustic drum kits for Session Drummer 3 from Cakewalk or a third party? There are lots of drum samples around, but it would be great to have some sets that integrate with SD3 features and show up in the kit selection.
I am personally interested in acoustic kits, but I'm sure there is a market for all types.
I can't say more than there is something that might interest you coming soon for Session Drummer 3.
post edited by Mod Bod - 2011/04/18 11:35:36
|
meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
Re:Kits for Session Drumer 3
2011/04/18 09:27:18
(permalink)
Do any of those kits have reasonable brush samples?
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
stratman70
Max Output Level: -45 dBFS
- Total Posts : 3044
- Joined: 2006/09/12 20:34:12
- Location: Earth
- Status: offline
Re:Kits for Session Drumer 3
2011/04/18 10:12:04
(permalink)
Mod Bod
konradh
Is it possible to buy additional acoustic drum kits for Session Drummer 3 from Cakewalk or a third party? There are lots of drum samples around, but it would be great to have some sets that integrate with SD3 features and show up in the kit selection.
I am personally interested in acoustic kits, but I'm sure there is a market for all types.
I can't say more than there is something that might interest you coming soon for Session Drummer 2.
Hey Dave-Session Drummer 2? Or did you mean 3? Thanks
|
Dave Modisette
Max Output Level: 0 dBFS
- Total Posts : 11050
- Joined: 2003/11/13 22:12:55
- Location: Brandon, Florida
- Status: offline
Re:Kits for Session Drumer 3
2011/04/18 11:36:53
(permalink)
stratman70
Mod Bod
konradh
Is it possible to buy additional acoustic drum kits for Session Drummer 3 from Cakewalk or a third party? There are lots of drum samples around, but it would be great to have some sets that integrate with SD3 features and show up in the kit selection.
I am personally interested in acoustic kits, but I'm sure there is a market for all types.
I can't say more than there is something that might interest you coming soon for Session Drummer 2.
Hey Dave-Session Drummer 2? Or did you mean 3?
Thanks
Thanks for bringing that to my attention. It will be for Session Drummer 3. (I've corrected my previous post.)
|
LANEY
Max Output Level: -64 dBFS
- Total Posts : 1350
- Joined: 2010/12/11 20:27:13
- Location: USA
- Status: offline
Re:Kits for Session Drumer 3
2011/04/18 11:38:26
(permalink)
No to the brush samples. :(
i7/16GB ram Win 7 x64 SONAR Platinum Producer x64 VS-700 C&R Octa-Capture and VS-100 for live recording
|
dlesaux
Max Output Level: -70 dBFS
- Total Posts : 1034
- Joined: 2009/09/13 09:25:18
- Status: offline
Re:Kits for Session Drumer 3
2011/04/18 12:17:22
(permalink)
Just started using EZdrummer and won't be going back to Session Drummer anytime soon. EZdrummer rocks!
|
dlesaux
Max Output Level: -70 dBFS
- Total Posts : 1034
- Joined: 2009/09/13 09:25:18
- Status: offline
Re:Kits for Session Drumer 3
2011/04/18 12:20:19
(permalink)
But, EZdrummer doesn't come with brush samples.. I believe you need the Jazz Expansion kit for brush samples..
|
Robomusic
Max Output Level: 0 dBFS
- Total Posts : 8943
- Joined: 2004/05/30 00:54:24
- Status: offline
Re:Kits for Session Drumer 3
2011/04/18 14:00:25
(permalink)
Rayzoon.com jamstix my personal fave! Plays nice in all things Cake!
|
konradh
Max Output Level: -42 dBFS
- Total Posts : 3325
- Joined: 2006/01/16 16:07:06
- Status: offline
Re:Kits for Session Drumer 3
2011/04/19 11:28:34
(permalink)
Thanks very much for the kind help, everyone. One cannot have too many usable drum kits.
|
Dave Modisette
Max Output Level: 0 dBFS
- Total Posts : 11050
- Joined: 2003/11/13 22:12:55
- Location: Brandon, Florida
- Status: offline
Re:Kits for Session Drumer 3
2011/05/02 18:25:08
(permalink)
I mentioned that something was coming for Session Drummer 3 that the OP might find interesting. It just went live so I can now say that Platinum Samples has released a version the Andy Johns kit for Session Drummer 3. It also includes a nice sampling of the Steve Ferrone and Bobby Jarzombek groove libraries. It's available in the Cakewalk store as well as the Platinum Samples web site. I'm a bit influenced by my betatesting association with Rail Jon Rogut and Platinum Samples but I really feel like this is the best library offered for Session Drummer 3 so far. It's in your face with a balanced touch of bleed that makes it feel like a real session recording. It makes Session Drummer very useable for someone who wants to stick with the included Cakewalk drum sampler. Check it out at www.platinumsamples.com
|
stratman70
Max Output Level: -45 dBFS
- Total Posts : 3044
- Joined: 2006/09/12 20:34:12
- Location: Earth
- Status: offline
Re:Kits for Session Drumer 3
2011/05/02 22:03:25
(permalink)
Hey Dave Bought the 2 AJ kits. They sound "great" IMHO. I have Steven Slate Drums also-but it's nice to have some nice stuff (besides SSD and Ocean Way SD3) for Session Drummer 3. One is 611MB and the other is 837MB (about) That's some compression o0n the download-which is only 179MB-wow. Thanks for posting. Frank
post edited by stratman70 - 2011/05/02 22:04:26
|
stratman70
Max Output Level: -45 dBFS
- Total Posts : 3044
- Joined: 2006/09/12 20:34:12
- Location: Earth
- Status: offline
Re:Kits for Session Drumer 3
2011/05/02 22:06:01
(permalink)
konradh
Is it possible to buy additional acoustic drum kits for Session Drummer 3 from Cakewalk or a third party? There are lots of drum samples around, but it would be great to have some sets that integrate with SD3 features and show up in the kit selection.
I am personally interested in acoustic kits, but I'm sure there is a market for all types.
You get a lot of kits from Didgi stuff on CW site. But with the Ocean way free one and the SSD kits, and a few others that come with SD3 your fine. The AJ kits Dave posted about are "great" The digi add on Accoustic kits are so-so, again IMHO
post edited by stratman70 - 2011/05/02 22:07:16
|
sergiobklyn
Max Output Level: -83 dBFS
- Total Posts : 372
- Joined: 2003/11/06 09:43:40
- Location: Brooklyn, NY
- Status: offline
Re:Kits for Session Drumer 3
2011/05/02 22:42:30
(permalink)
Hi Dave,
What is the size of this SD3 kit?
|
...wicked
Max Output Level: -1.5 dBFS
- Total Posts : 7360
- Joined: 2003/12/18 01:00:56
- Location: Seattle
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 00:10:21
(permalink)
I checked out the samples very briefly. Why do all the drum sample kits seem to all have giant-ass 80's rock sounds? With all the retro sounds the rage I'm surprised there's not more attention to older sounding drum kits. Maybe Session Drummer needs a virtual towel you can toss over the drumheads. 
=========== The Fog People =========== Intel i7-4790 16GB RAM ASUS Z97 Roland OctaCapture Win10/64 SONAR Platinum 64-bit billions VSTs, some of which work
|
cecelius2
Max Output Level: -61 dBFS
- Total Posts : 1494
- Joined: 2009/11/06 16:12:11
- Location: Pacific Northwest
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 03:23:16
(permalink)
Mod Bod
I mentioned that something was coming for Session Drummer 3 that the OP might find interesting. It just went live so I can now say that Platinum Samples has released a version the Andy Johns kit for Session Drummer 3. It also includes a nice sampling of the Steve Ferrone and Bobby Jarzombek groove libraries.
It's available in the Cakewalk store as well as the Platinum Samples web site. I'm a bit influenced by my betatesting association with Rail Jon Rogut and Platinum Samples but I really feel like this is the best library offered for Session Drummer 3 so far. It's in your face with a balanced touch of bleed that makes it feel like a real session recording. It makes Session Drummer very useable for someone who wants to stick with the included Cakewalk drum sampler.
Check it out at www.platinumsamples.com
Thanks Mod Bod for this information and for the link. Cecelius2
|
codamedia
Max Output Level: -67 dBFS
- Total Posts : 1185
- Joined: 2005/01/24 09:58:10
- Location: Winnipeg Canada
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 07:37:55
(permalink)
dlesaux
Just started using EZdrummer and won't be going back to Session Drummer anytime soon. EZdrummer rocks!
I'm with you. Having the ability to blend ambient and overhead mics makes a big difference, and it is just so - well - EZ! dlesaux
But, EZdrummer doesn't come with brush samples.. I believe you need the Jazz Expansion kit for brush samples..
Both the Jazz Expansion and the Nashville Expansion come with really nice brush kits.
Don't fix it in the mix ... Fix it in the take!
Desktop: Win 7 Pro 64 Bit , ASUS MB w/Intel Chipset, INTEL Q9300 Quad Core, 2.5 GHz, 8 GB RAM, ATI 5450 Video Laptop: Windows 7 Pro, i5, 8 Gig Ram Hardware: Presonus FP10 (Firepod), FaderPort, M-Audio Axiom 49, Mackie 1202 VLZ, POD X3 Live, Variax 600, etc... etc...
|
Dave Modisette
Max Output Level: 0 dBFS
- Total Posts : 11050
- Joined: 2003/11/13 22:12:55
- Location: Brandon, Florida
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 07:49:55
(permalink)
...wicked
I checked out the samples very briefly.
Why do all the drum sample kits seem to all have giant-ass 80's rock sounds? With all the retro sounds the rage I'm surprised there's not more attention to older sounding drum kits.
Maybe Session Drummer needs a virtual towel you can toss over the drumheads.
I imagine it's like anything else, people produce what sells the most (if they get it right.) Maybe Session Drummer 3 will someday have more control over room bleed and give the SONAR users the option to blend ambience to taste. Of course, that will likely raise the cost of libraries and the core sampler.
|
Dave Modisette
Max Output Level: 0 dBFS
- Total Posts : 11050
- Joined: 2003/11/13 22:12:55
- Location: Brandon, Florida
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 07:53:29
(permalink)
sergiobklyn
Hi Dave,
What is the size of this SD3 kit?
I don't know the exact details. Here is a copy of the press release http://forum.cakewalk.com/fb.ashx?m=2295032 . EDIT: I just noticed the retail price. Forty bucks makes this pretty much a no brainer if you use Session Drummer 3 at all. Even if you have another favorite drum sampler (  ), this price for the samples and grooves makes it darn attractive.
post edited by Mod Bod - 2011/05/03 07:57:30
|
michael japan
Max Output Level: -22.5 dBFS
- Total Posts : 5252
- Joined: 2004/01/29 03:01:03
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 08:23:23
(permalink)
EZ drummer vintage kit is pretty nice if you don't have a real drummer--I personally use real drums--I program drums pro level, but the guy who does it for me is like light years ahead of me. He lives and breathes drums. 3 songs $250.
Windows 10/64 bit/i7-6560U/SSD/16GB RAM/Cakelab/Sonar Platinum/Pro Tools/Studio 1/Studio 192/DP88/MOTU AVB/Grace M101/AKG Various/Blue Woodpecker/SM81x2/Yamaha C1L Grand Piano/CLP545/MOX88/MOTIF XS Rack Rack/MX61/Korg CX3/Karma/Scarbee EP88s/ Ivory/Ravenscroft Piano/JBL4410/NS10m/Auratones/Omnisphere/Play Composers Selection/Waves/Komplete Kontrol
|
stratman70
Max Output Level: -45 dBFS
- Total Posts : 3044
- Joined: 2006/09/12 20:34:12
- Location: Earth
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 08:25:24
(permalink)
sergiobklyn
Hi Dave,
What is the size of this SD3 kit?
See post 15, I posted the installed sizes and the actual download size
|
codamedia
Max Output Level: -67 dBFS
- Total Posts : 1185
- Joined: 2005/01/24 09:58:10
- Location: Winnipeg Canada
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 12:21:55
(permalink)
EDIT: I just noticed the retail price. Forty bucks makes this pretty much a no brainer if you use Session Drummer 3 at all. Even if you have another favorite drum sampler (), this price for the samples and grooves makes it darn attractive. Dave - you are dead on with this. I too was surprised at the cost, and will certainly be adding it to my SD3 library.
Don't fix it in the mix ... Fix it in the take!
Desktop: Win 7 Pro 64 Bit , ASUS MB w/Intel Chipset, INTEL Q9300 Quad Core, 2.5 GHz, 8 GB RAM, ATI 5450 Video Laptop: Windows 7 Pro, i5, 8 Gig Ram Hardware: Presonus FP10 (Firepod), FaderPort, M-Audio Axiom 49, Mackie 1202 VLZ, POD X3 Live, Variax 600, etc... etc...
|
konradh
Max Output Level: -42 dBFS
- Total Posts : 3325
- Joined: 2006/01/16 16:07:06
- Status: offline
Re:Kits for Session Drumer 3
2011/05/03 12:48:08
(permalink)
I bought the extra kits and they are worth the price many times over.
As a point of reference, I gladly bought a Linn LM-1 Drum Computer (serial number <100) in 1980 for around $5,000—over $11,000 in 2011 dollars. Amazing...
|