ProChannel isn't working in 32-bit??

Author
Post
Essentials Only Full Version
zerosum
Max Output Level: -90 dBFS
  • Total Posts : 5
  • Joined: 2011/05/24 22:04:07
  • Status: offline
2011/05/24 22:21:17 (permalink)

ProChannel isn't working in 32-bit??

I was really excited to work with ProChannel, so I went to try it out and it just doesn't work in 32-bit X1, for me at least.  I tried it in existing projects from 8.5, and then in a blank new project, and none of the three components do anything.  The EQ curve doesn't even shape if you turn the knobs.  I opened 64-bit X1 to see if I'd have the same problem there, but it was working fine.  I was hoping to move some 32-bit-only plugins over to ProChannel so I could go full 64-bit, but it doesn't look like I can do that if I can't A/B 'em in X1 32.
#1

10 Replies Related Threads
    tunekicker
    Max Output Level: -65 dBFS
    • Total Posts : 1261
    • Joined: 2005/10/28 14:39:50
    • Location: Grand Junction, CO
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/24 22:57:50 (permalink)
    There are small buttons in the upper right of each module. Grey=disengaged (which is the default), Blue=enabled. Are the Pro Channel modules you're trying to use enabled?
    #2
    zerosum
    Max Output Level: -90 dBFS
    • Total Posts : 5
    • Joined: 2011/05/24 22:04:07
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/24 23:07:22 (permalink)
    They turn on automatically when you touch a setting.
    #3
    Fearful Symmetry
    Max Output Level: -82 dBFS
    • Total Posts : 446
    • Joined: 2004/07/19 15:06:12
    • Location: Auckland
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/24 23:09:36 (permalink)
    It may well be a VST. I had exactly the same and the removal of a VST (can't recall which) solved it.
    FS
    #4
    zerosum
    Max Output Level: -90 dBFS
    • Total Posts : 5
    • Joined: 2011/05/24 22:04:07
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/24 23:11:32 (permalink)
    I tried it in a blank project and it still didn't work.
    #5
    HumbleNoise
    Max Output Level: -46 dBFS
    • Total Posts : 2946
    • Joined: 2004/01/04 12:53:50
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/24 23:14:04 (permalink)
    Try a re-scan of your VST's. I know it sounds dumb but it's fixed a couple of Pro Channel problems in the past.

    Humbly Yours

    Larry

    Sonar X2 x64
    MAudio 2496
    Yamaha MG 12/4
    Roland XV-88
    Intel MB with Q6600 and 4 GB Ram
    NVidia 9800 GTX
    Windows 7 x64 Home Premium
    #6
    Fearful Symmetry
    Max Output Level: -82 dBFS
    • Total Posts : 446
    • Joined: 2004/07/19 15:06:12
    • Location: Auckland
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/24 23:14:05 (permalink)
    No, I mean, remove the VST's from the scan utility. Have no VST's. See if it PC springs to life. It's worth fighting for :-)
    #7
    zerosum
    Max Output Level: -90 dBFS
    • Total Posts : 5
    • Joined: 2011/05/24 22:04:07
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/24 23:45:35 (permalink)
    No go on both of those suggestions.  :(
    #8
    codamedia
    Max Output Level: -67 dBFS
    • Total Posts : 1185
    • Joined: 2005/01/24 09:58:10
    • Location: Winnipeg Canada
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/25 07:38:10 (permalink)
    tunekicker
    There are small buttons in the upper right of each module. Grey=disengaged (which is the default), Blue=enabled. Are the Pro Channel modules you're trying to use enabled?
     
    zerosum

    They turn on automatically when you touch a setting.
    They only turn on automatically the first time they are touched. If you've turned them off again, you need to engage them via the on/off buttons, as touching a setting will no longer bring it back to life.

    Don't fix it in the mix ... Fix it in the take! 
     
    Desktop: Win 7 Pro 64 Bit , ASUS MB w/Intel Chipset, INTEL Q9300 Quad Core, 2.5 GHz, 8 GB RAM, ATI 5450 Video
    Laptop: Windows 7 Pro, i5, 8 Gig Ram
    Hardware: Presonus FP10 (Firepod), FaderPort, M-Audio Axiom 49, Mackie 1202 VLZ, POD X3 Live, Variax 600, etc... etc...
    #9
    zerosum
    Max Output Level: -90 dBFS
    • Total Posts : 5
    • Joined: 2011/05/24 22:04:07
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/25 08:17:50 (permalink)
    Not the issue, haha.
    #10
    karma1959
    Max Output Level: -80 dBFS
    • Total Posts : 515
    • Joined: 2008/10/31 10:56:29
    • Location: Brooklyn, NY
    • Status: offline
    Re:ProChannel isn't working in 32-bit?? 2011/05/25 10:12:34 (permalink)
    When having the issue, are you trying to enable ProChannel on a track which was previously using the Sonitux EQ?  If so, you'll need to hold Cntrl while clicking the 'on' button in the upper right hand corner of the Pro Channel EQ module to enable it (and disable the Sonitus EQ). 
     
    I (and others on the forum) have encountered some instances where the ProChannel EQ wouldn't enable despite doing the process above - however this 'should' enable it if Sonitus was previously used on that track.
    #11
    Jump to:
    © 2024 APG vNext Commercial Version 5.1