m1diman
Max Output Level: -90 dBFS
- Total Posts : 7
- Joined: 2008/08/04 12:13:01
- Status: offline
Zoom R24 - Unable to use it in Sonar Producer X!
I keep getting the following error when I select it in Edit - Preferences. I am selecting tho following
Input
ZOOM R16_R24 Audio Interface 1/2
ZOOM R16_R24 Audio Interface 3/4
ZOOM R16_R24 Audio Interface 5/6
ZOOM R16_R24 Audio Interface 7/8
Output
ZOOM R16_R24 Audio Interface
I am leaving all on board sound devices unchecked
My hardware is a Dell Inspiron 1747 Laptop running Winows 7 Ultimate 64bit
Using latest Zoom drivers 1.30 and system version 1.10
When I connect my Roland GR-55 as an audio interface I have no problems at all an playsback fine
Anbody any suggestions?
|
daveny5
Max Output Level: 0 dBFS
- Total Posts : 16934
- Joined: 2003/11/06 09:54:36
- Location: North Carolina
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/29 09:01:19
(permalink)
What's the error message? That is not an error message.
Dave Computer: Intel i7, ASROCK H170M, 16GB/5TB+, Windows 10 Pro 64-bit, Sonar Platinum, TASCAM US-16x08, Cakewalk UM-3G MIDI I/F Instruments: SL-880 Keyboard controller, Korg 05R/W, Korg N1R, KORG Wavestation EX Axes: Fender Stratocaster, Line6 Variax 300, Ovation Acoustic, Takamine Nylon Acoustic, Behringer GX212 amp, Shure SM-58 mic, Rode NT1 condenser mic. Outboard: Mackie 1402-VLZ mixer, TC Helicon VoiceLive 2, Digitech Vocalist WS EX, PODXTLive, various stompboxes and stuff. Controllers: Korg nanoKONTROL, Wacom Bamboo Touchpad
|
m1diman
Max Output Level: -90 dBFS
- Total Posts : 7
- Joined: 2008/08/04 12:13:01
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/29 09:12:15
(permalink)
DOH! fogot to put it in
'the following audio drivers either do not support the current audio format or are in use by another application'
|
Kalle Rantaaho
Max Output Level: -5 dBFS
- Total Posts : 7005
- Joined: 2006/01/09 13:07:59
- Location: Finland
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/29 09:14:47
(permalink)
That message usually means that soundcard and SONAR are set to different sample rate.
SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre - Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc. The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
|
m1diman
Max Output Level: -90 dBFS
- Total Posts : 7
- Joined: 2008/08/04 12:13:01
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/29 09:35:23
(permalink)
Thanks Kalle
Interface seems to insist on coming up as 96kHz and not sure how to change it. I have tried changingthe settings within sonar to match it but still getting the same error. I have tried installing Sonar X1 on a Windows XP 32 bit machine but getting the same problem. On that system the internal sound card is disables so not even showing up in Sonar settings. The interface seems to work fine on Audacity on both systems so looks to be a problem between Sonar and the Zoom R24 (GR-55 works fine in Sonar)
|
jbow
Max Output Level: -0.2 dBFS
- Total Posts : 7601
- Joined: 2003/11/26 19:14:18
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/29 13:49:53
(permalink)
I have been able to playback through an R-16 but have not been able to get it to work as a controller. Honestly I have not put in the time I should, I got frustrated... I may try again but maybe not. I may just sell it and get an Alphatrack which I think would be better for my needs. I hope you get it working.
Julien
Sonar Platinum Studiocat Pro 16G RAM (some bells and whistles) HP Pavilion dm4 1165-dx (i5)-8G RAM Octa-Capture KRK Rokit-8s MIDI keyboards... Control Pad mics. I HATE THIS CMPUTER KEYBARD!
|
Clint Swank
Max Output Level: -87 dBFS
- Total Posts : 178
- Joined: 2008/08/04 14:29:51
- Location: Ithaca, NY
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/29 21:46:35
(permalink)
☄ Helpful
On the R16--If it defaults to 96kHz, press USB>enter>reset. I assume it works the same with the R24. BTW, I'm using ASIO4ALL. The Zoom driver (as of a year ago, when I got it) was kind of hinky, but ASIO4ALL has been flawless.
tunes: http://www.soundclick.com/ClintSwank HP 1520t I7 3770 8GIG ram Seagate 180g & 1TB extHD 7200 RPM, Zoom R-16 USB int, Fishman Triple Play guitar-midi interface, Alesis RA 300 power amp, Audix 1A monitors, Frankenstrat, old Martin, Godin LGXT
|
m1diman
Max Output Level: -90 dBFS
- Total Posts : 7
- Joined: 2008/08/04 12:13:01
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/30 12:48:42
(permalink)
Clint Swank
On the R16--If it defaults to 96kHz, press USB>enter>reset. I assume it works the same with the R24. BTW, I'm using ASIO4ALL. The Zoom driver (as of a year ago, when I got it) was kind of hinky, but ASIO4ALL has been flawless.
Just tried that but what I get when I hist USB is the option to Terminate>Yes or No. I select Yes I then have to re execute Audio Interface connection to get it back up and just comes back as 96kHz. Going to try latest ASIO4ALL drivers to see if that helps
|
m1diman
Max Output Level: -90 dBFS
- Total Posts : 7
- Joined: 2008/08/04 12:13:01
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/30 14:47:34
(permalink)
Ok I seem to be getting somewhere but not uite their yet. ASIO drivers didnt seem to help initialy and still not sure how I got it working. Havent I can only playback cleanly if I max out the Latency to 348.3 msec. I just tried doing a recording and the latency dosent seem to affect audio playback and record. Doss seem to affect Soft Synths an the like very badly. Not sure if any body has any thouhts on this?
Also Got it working as a controller though beyond playback and volume control on the first 8 channels I haven realy experimented with it yet.
Thanks all for feedback and help.
Tony
|
m1diman
Max Output Level: -90 dBFS
- Total Posts : 7
- Joined: 2008/08/04 12:13:01
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/30 14:54:41
(permalink)
jbow
I have been able to playback through an R-16 but have not been able to get it to work as a controller. Honestly I have not put in the time I should, I got frustrated... I may try again but maybe not. I may just sell it and get an Alphatrack which I think would be better for my needs. I hope you get it working.
Julien
Hi Julien I got it working as a controller by doing the following:- Edit>Preferences> Then under MIDI selected Control Surfaces select add New Controller Surface From the pop up window Controller/Surface - ZOOM R16_24 INPUT and OUTPUT Ports - ZOOM R16_24 Audio Interface. Make sure under MIDI Devices the checkbox for both has been ticked. Hope it helps Tony
|
jbow
Max Output Level: -0.2 dBFS
- Total Posts : 7601
- Joined: 2003/11/26 19:14:18
- Status: offline
Re:Zoom R24 - Unable to use it in Sonar Producer X!
2011/05/30 15:15:14
(permalink)
Hi Julien I got it working as a controller by doing the following:- Edit>Preferences> Then under MIDI selected Control Surfaces select add New Controller Surface From the pop up window Controller/Surface - ZOOM R16_24 INPUT and OUTPUT Ports - ZOOM R16_24 Audio Interface. Make sure under MIDI Devices the checkbox for both has been ticked. Hope it helps Tony Thanks Tony, It will probably be next week but I will give it a try. I appreciate the help!! Julien
Sonar Platinum Studiocat Pro 16G RAM (some bells and whistles) HP Pavilion dm4 1165-dx (i5)-8G RAM Octa-Capture KRK Rokit-8s MIDI keyboards... Control Pad mics. I HATE THIS CMPUTER KEYBARD!
|