sharpdion23
Max Output Level: -75 dBFS
- Total Posts : 784
- Joined: 2009/04/26 18:07:59
- Location: Vancouver, BC
- Status: offline
Where is x1 Trim?
In 8.5 there is this trim control in track view. Where is it in X1? Is it now called Gain? and where is the quick group in x1 so that I can control the volume for multiple tracks in track view?
Win7 pro 64bit*SonarX1 PE 64 bit* AMD Athlon(tm)64 X2 Dual Processor 6000+ 3.00 Ghz* 4GB Ram* 232GB HD* Cakewalk MA-15D* SPS-66 FireWire
Owner of Sonar 6 Studio* Sonar 7 PE * Sonar 8.0 PE * Sonar 8.5.3 PE * Sonar X1 PE *
Link to upload Screens: http://forum.cakewalk.com/tm.aspx?m=1592276 A lot of people are afraid of heights. Not me, I'm afraid of widths.
|
CJaysMusic
Max Output Level: 0 dBFS
- Total Posts : 30423
- Joined: 2006/10/28 01:51:41
- Location: Miami - Fort Lauderdale - Davie
- Status: offline
Re:Where is x1 Trim?
2011/06/03 23:05:08
(permalink)
Gain and trim are of the same in Sonar X1
CTRL Click will quick group the track. Track view, you CTRL Click in the track # section (upper corner when expanded) and in the console view you CTRL Click the bottom track numbers
Cj
|
sharpdion23
Max Output Level: -75 dBFS
- Total Posts : 784
- Joined: 2009/04/26 18:07:59
- Location: Vancouver, BC
- Status: offline
Re:Where is x1 Trim?
2011/06/03 23:10:04
(permalink)
Thanks, but when I quick group tracks and try to change the gain of one track, the other tracks gain don't change.
post edited by sharpdion23 - 2011/06/03 23:12:18
Win7 pro 64bit*SonarX1 PE 64 bit* AMD Athlon(tm)64 X2 Dual Processor 6000+ 3.00 Ghz* 4GB Ram* 232GB HD* Cakewalk MA-15D* SPS-66 FireWire
Owner of Sonar 6 Studio* Sonar 7 PE * Sonar 8.0 PE * Sonar 8.5.3 PE * Sonar X1 PE *
Link to upload Screens: http://forum.cakewalk.com/tm.aspx?m=1592276 A lot of people are afraid of heights. Not me, I'm afraid of widths.
|
CJaysMusic
Max Output Level: 0 dBFS
- Total Posts : 30423
- Joined: 2006/10/28 01:51:41
- Location: Miami - Fort Lauderdale - Davie
- Status: offline
Re:Where is x1 Trim?
2011/06/04 02:52:52
(permalink)
Hold down the CTL button and then move the gain. Doing that will move all the quick grouped tracks. X1 is different from Sonar 8. In many ways, its worse In my opinion. Like quick grouping.
|
sharpdion23
Max Output Level: -75 dBFS
- Total Posts : 784
- Joined: 2009/04/26 18:07:59
- Location: Vancouver, BC
- Status: offline
Re:Where is x1 Trim?
2011/06/04 11:56:43
(permalink)
I found that that did not owrk for me, but I found out that when I right click the gain I could add it to group a, b, c.... and it will stay like that just for the gain control knob
Win7 pro 64bit*SonarX1 PE 64 bit* AMD Athlon(tm)64 X2 Dual Processor 6000+ 3.00 Ghz* 4GB Ram* 232GB HD* Cakewalk MA-15D* SPS-66 FireWire
Owner of Sonar 6 Studio* Sonar 7 PE * Sonar 8.0 PE * Sonar 8.5.3 PE * Sonar X1 PE *
Link to upload Screens: http://forum.cakewalk.com/tm.aspx?m=1592276 A lot of people are afraid of heights. Not me, I'm afraid of widths.
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re:Where is x1 Trim?
2011/06/04 12:24:28
(permalink)
I found that that did not owrk for me, but I found out that when I right click the gain I could add it to group a, b, c.... and it will stay like that just for the gain control knob That latter method is "normal" grouping, not quick grouping. If you just want to make one quick change to multiple tracks, and then have them act independently again, Ctrl-clicking/dragging controls with multiple tracks selected should work. You know you need to Ctrl-click track numbers or non-adjacent tracks or drag through the track numbers of adjacent tracks to select more than one simultaneously, right? You might be able to get away with Ctrl-selecting one track number, and then Ctrl-clicking a widget in another track without first Ctrl-selecting the track, but I've found the control matching can be inconsistent if both tracks are not fully selected.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
sharpdion23
Max Output Level: -75 dBFS
- Total Posts : 784
- Joined: 2009/04/26 18:07:59
- Location: Vancouver, BC
- Status: offline
Re:Where is x1 Trim?
2011/06/04 12:41:54
(permalink)
brundlefly
I found that that did not owrk for me, but I found out that when I right click the gain I could add it to group a, b, c.... and it will stay like that just for the gain control knob
That latter method is "normal" grouping, not quick grouping. If you just want to make one quick change to multiple tracks, and then have them act independently again, Ctrl-clicking/dragging controls with multiple tracks selected should work.
You know you need to Ctrl-click track numbers or non-adjacent tracks or drag through the track numbers of adjacent tracks to select more than one simultaneously, right?
You might be able to get away with Ctrl-selecting one track number, and then Ctrl-clicking a widget in another track without first Ctrl-selecting the track, but I've found the control matching can be inconsistent if both tracks are not fully selected.
You know you need to Ctrl-click track numbers or non-adjacent tracks or drag through the track numbers of adjacent tracks to select more than one simultaneously, right? Yeah, but it doesn't work on mine....  It used to work but thats ok
Win7 pro 64bit*SonarX1 PE 64 bit* AMD Athlon(tm)64 X2 Dual Processor 6000+ 3.00 Ghz* 4GB Ram* 232GB HD* Cakewalk MA-15D* SPS-66 FireWire
Owner of Sonar 6 Studio* Sonar 7 PE * Sonar 8.0 PE * Sonar 8.5.3 PE * Sonar X1 PE *
Link to upload Screens: http://forum.cakewalk.com/tm.aspx?m=1592276 A lot of people are afraid of heights. Not me, I'm afraid of widths.
|