No Lexicon Reverb

Author
konradh
Max Output Level: -42 dBFS
  • Total Posts : 3325
  • Joined: 1/16/2006
  • Status: offline
June 05, 11 7:41 PM (permalink)

No Lexicon Reverb

I have three Vienna Symphonic tracks set up as Simple Instrument tracks.  Input monitoring is on.  I added Lexicon reverb to the tracks.  At first, I could hear the echo.  After saving the file and reloading it days later, I cannot hear the reverb.  (Yes, the switch is on in the FX bin.)

I tried deleting and re-adding the reverb to the tracks.  If it matters, in this case I am using a Medium Hall with the mix on 35%.

This is not the first time I have run into this with the Lexicon plug-in.  Is there something simple I am missing?
#1

18 Replies Related Threads

    CJaysMusic
    Max Output Level: 0 dBFS
    • Total Posts : 30423
    • Joined: 10/28/2006
    • Location: Miami - Fort Lauderdale - Davie
    • Status: offline
    Re:No Lexicon Reverb June 05, 11 7:49 PM (permalink)
    At first, I could hear the echo.  After saving the file and reloading it days later, I cannot hear the reverb.  (Yes, the switch is on in the FX bin.)


    Check your Pre-Delay setting. This is what gives the echoed effect in reverbs. Or maybe you need to increase the wettness or is that what he said to her?

    www.audio-mastering-mixing.com - A Professional Worldwide Audio Mixing & Mastering Studio, Providing Online And Attended Sessions. We also do TV commercials, Radio spots & spoken word books
    Audio Blog
    #2
    konradh
    Max Output Level: -42 dBFS
    • Total Posts : 3325
    • Joined: 1/16/2006
    • Status: offline
    Re:No Lexicon Reverb June 06, 11 9:02 AM (permalink)
    Thanks, man, but the issue is that I hear it for a while and then later don't and then later do again.  Not sure what's going on with it.

    Last night I could not the reverb.  Closed the file and Sonar, reloaded it, and it was fine.

    Odd...
    #3
    CJaysMusic
    Max Output Level: 0 dBFS
    • Total Posts : 30423
    • Joined: 10/28/2006
    • Location: Miami - Fort Lauderdale - Davie
    • Status: offline
    Re:No Lexicon Reverb June 06, 11 10:10 AM (permalink)
    Maybe you have some sort of automation enabled for that plugin. That's the only scenario I can think of that can make that happen. So look for envelopes for that track and see if they are connected to the effect. I bet you mistakenly inserted some envelopes/automation.


    You know, I think your my lost brother..
    Cj

    www.audio-mastering-mixing.com - A Professional Worldwide Audio Mixing & Mastering Studio, Providing Online And Attended Sessions. We also do TV commercials, Radio spots & spoken word books
    Audio Blog
    #4
    konradh
    Max Output Level: -42 dBFS
    • Total Posts : 3325
    • Joined: 1/16/2006
    • Status: offline
    Re:No Lexicon Reverb June 06, 11 11:56 AM (permalink)
    I will check it out, thanks.  And we could be bros...me being the ugly one!
     
    I see from your site that you do mastering.  I may have a project or two that could use your services.  I'll contact you there as the time gets closer.
    #5
    dlesaux
    Max Output Level: -70 dBFS
    • Total Posts : 1034
    • Joined: 9/13/2009
    • Status: offline
    Re:No Lexicon Reverb June 06, 11 12:06 AM (permalink)
    HeyI think CJ and Konradh are really the same person! Check out their avatars!  ;o)
    #6
    CJaysMusic
    Max Output Level: 0 dBFS
    • Total Posts : 30423
    • Joined: 10/28/2006
    • Location: Miami - Fort Lauderdale - Davie
    • Status: offline
    Re:No Lexicon Reverb June 06, 11 10:01 PM (permalink)
    No, we are not the same, but im calling my dad to see if he had any flings

    www.audio-mastering-mixing.com - A Professional Worldwide Audio Mixing & Mastering Studio, Providing Online And Attended Sessions. We also do TV commercials, Radio spots & spoken word books
    Audio Blog
    #7
    konradh
    Max Output Level: -42 dBFS
    • Total Posts : 3325
    • Joined: 1/16/2006
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 10:00 AM (permalink)
    For the record, the bug or behavior I described is not limited to Lexicon.  I am having sporadic results with other plug-ins as well (e.g., Cakewalk reverb).
    #8
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 10/8/2007
    • Location: Bristol, UK
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 11:55 AM (permalink)
    I'm assuming you're running the plug as an insert Effect in the track Fx bin.

    Have you tried putting the reverb on a bus and running a send to the bus?



    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #9
    fitzj
    Max Output Level: -61 dBFS
    • Total Posts : 1487
    • Joined: 10/13/2005
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 2:24 PM (permalink)
    Is that your brother CJ awfully alike.
    #10
    CJaysMusic
    Max Output Level: 0 dBFS
    • Total Posts : 30423
    • Joined: 10/28/2006
    • Location: Miami - Fort Lauderdale - Davie
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 2:48 PM (permalink)
    We may have the same baby dady's....
     
    Does it happen in another project? Sounds like something is funky with that project
    post edited by CJaysMusic - June 07, 11 2:50 PM

    www.audio-mastering-mixing.com - A Professional Worldwide Audio Mixing & Mastering Studio, Providing Online And Attended Sessions. We also do TV commercials, Radio spots & spoken word books
    Audio Blog
    #11
    konradh
    Max Output Level: -42 dBFS
    • Total Posts : 3325
    • Joined: 1/16/2006
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 2:49 PM (permalink)
    Re: The bus solution, I will try that in order to isolate the problem, altho I will still want to be able to use insert effects, which is what I am describing here.

    Several people have commented on CJ and me, but i think it is just a quirk of the picture.  I am much uglier in real life.
    #12
    CJaysMusic
    Max Output Level: 0 dBFS
    • Total Posts : 30423
    • Joined: 10/28/2006
    • Location: Miami - Fort Lauderdale - Davie
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 2:51 PM (permalink)
    LOl, Try using an audio track and midi track with the vienna synth. Maybe its an instrument track problem

    www.audio-mastering-mixing.com - A Professional Worldwide Audio Mixing & Mastering Studio, Providing Online And Attended Sessions. We also do TV commercials, Radio spots & spoken word books
    Audio Blog
    #13
    Jonbouy
    Max Output Level: 0 dBFS
    • Total Posts : 22562
    • Joined: 4/14/2008
    • Location: England's Sunshine South Coast
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 3:00 PM (permalink)
    WOW

    2 CJ's...

    Is this to do with that matter / anti-matter thing that they were talking about on TV the last couple of days?

    Tell me it isn't so...
    post edited by Jonbouy - June 07, 11 3:01 PM

    "We can't do anything to change the world until capitalism crumbles.
    In the meantime we should all go shopping to console ourselves" - Banksy
    #14
    SteveStrummerUK
    Max Output Level: 0 dBFS
    • Total Posts : 31112
    • Joined: 10/28/2006
    • Location: Worcester, England.
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 3:08 PM (permalink)
    Jonbouy


    WOW

    2 CJ's...

    Is this to do with that matter / anti-matter thing that they were talking about on TV the last couple of days?

    Tell me it isn't so...

     
    Just chuck in Rob Halford for the complete set
     
     

     
     
     

     Music:     The Coffee House BandVeRy MeTaL

    #15
    SF_Green
    Max Output Level: -62 dBFS
    • Total Posts : 1403
    • Joined: 9/13/2005
    • Location: San Francisco
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 4:14 PM (permalink)
    You know, I think your my lost brother..
    Cj




    I was thinking the same thing!!

    post edited by SF_Green - June 07, 11 4:15 PM

    AMD FX-8370, Gigabyte 990FXA-UD3,  Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121
    Cubase Pro 10.0.5, SonarPt-2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
    #16
    SF_Green
    Max Output Level: -62 dBFS
    • Total Posts : 1403
    • Joined: 9/13/2005
    • Location: San Francisco
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 4:16 PM (permalink)
    And what's up with the quotes today?!?!?

    AMD FX-8370, Gigabyte 990FXA-UD3,  Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121
    Cubase Pro 10.0.5, SonarPt-2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
    #17
    soundsubs
    Max Output Level: -81 dBFS
    • Total Posts : 496
    • Joined: 11/13/2003
    • Location: denver
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 5:22 PM (permalink)
    Try this:
    -add another plugin reverb (not another lexicon) in line AFTER the lexicon
    -save the project as "NAME_new" or something
    -exit sonar
    -open sonar
    -listen to the track to see if either reverb is there
    -if not, then delete lexicon, not the second one.
    -see if you hear it.
    -save project, close sonar.
    -open sonar, see if you hear the 2nd reverb.

    report back here.
    #18
    konradh
    Max Output Level: -42 dBFS
    • Total Posts : 3325
    • Joined: 1/16/2006
    • Status: offline
    Re:No Lexicon Reverb June 07, 11 6:09 PM (permalink)
    soundsubs, will try--thnx
    #19
    Jump to:
    © 2025 APG vNext Commercial Version 5.1