Can I manually input sustain pedal control after creating notes with mouse in PRV?

Author
Post
Essentials Only Full Version
Compguy
Max Output Level: -89 dBFS
  • Total Posts : 67
  • Joined: 2004/02/23 13:56:23
  • Status: offline
2011/06/27 10:16:07 (permalink)

Can I manually input sustain pedal control after creating notes with mouse in PRV?

I have a midi piano performance that has no sustain pedal information. How would I go about manually inserting sustain pedal data?
 
Please dumb it down as much as possible as I've never played with this kind of thing before.
 
Thanks!
#1

3 Replies Related Threads
    daveny5
    Max Output Level: 0 dBFS
    • Total Posts : 16934
    • Joined: 2003/11/06 09:54:36
    • Location: North Carolina
    • Status: offline
    Re:Can I manually input sustain pedal control after creating notes with mouse in PRV? 2011/06/27 12:08:46 (permalink)
    You can enter the MIDI control code. For Sustain Pedal the code is 64 and the value is 0 of off and 127 for on.

    Dave
    Computer: Intel i7, ASROCK H170M, 16GB/5TB+, Windows 10 Pro 64-bit, Sonar Platinum, TASCAM US-16x08, Cakewalk UM-3G MIDI I/F
    Instruments: SL-880 Keyboard controller, Korg 05R/W, Korg N1R, KORG Wavestation EX
    Axes: Fender Stratocaster, Line6 Variax 300, Ovation Acoustic, Takamine Nylon Acoustic, Behringer GX212 amp, Shure SM-58 mic, Rode NT1 condenser mic.
    Outboard: Mackie 1402-VLZ mixer, TC Helicon VoiceLive 2, Digitech Vocalist WS EX, PODXTLive, various stompboxes and stuff. 
    Controllers: Korg nanoKONTROL, Wacom Bamboo Touchpad
    #2
    larrymcg
    Max Output Level: -64 dBFS
    • Total Posts : 1310
    • Joined: 2003/11/05 17:00:22
    • Location: Redding (Northern California)
    • Status: offline
    Re:Can I manually input sustain pedal control after creating notes with mouse in PRV? 2011/06/27 18:08:26 (permalink)
    Sonar Home Studio will allow you to enter Control Codes by name in the midi event pane below the piano roll view.By using the lower pane you can visually see where they are going in relative to the midi notes shown in the upper pane.
    --Larry


    Intel Core i7-4790 @3.6GHz; 8GB; Win10 Pro 64bit; 1TB disk + 3TB ext disk; Midiman Fineline mixer; MidiSport 4x4 midi I/F; Roland JV-30 kbd/synth; Yamaha TG55 synth; Rx with 3 piece Home audio speakers; Sonar X3e Studio
    #3
    larrymcg
    Max Output Level: -64 dBFS
    • Total Posts : 1310
    • Joined: 2003/11/05 17:00:22
    • Location: Redding (Northern California)
    • Status: offline
    Re:Can I manually input sustain pedal control after creating notes with mouse in PRV? 2011/06/27 18:24:59 (permalink)
    I believe that SHS7 calls the lower pane the "Controller Pane".  There is a button at the top of the piano roll view to turn it on an off.  If you can't see it, hover your mouse at the bottom of the piano roll and the cursor will become two horizontal bars.  At that point click and drag up.

    The HELP should have some info to help work with the piano roll view and the controller pane.

    You can also enter the codes directly into the Event List which may be what Dave was referring to.

    --Larry


    Intel Core i7-4790 @3.6GHz; 8GB; Win10 Pro 64bit; 1TB disk + 3TB ext disk; Midiman Fineline mixer; MidiSport 4x4 midi I/F; Roland JV-30 kbd/synth; Yamaha TG55 synth; Rx with 3 piece Home audio speakers; Sonar X3e Studio
    #4
    Jump to:
    © 2024 APG vNext Commercial Version 5.1