To route metronome to Mixer channel. How you do this?

Author
Post
Essentials Only Full Version
alm1mal
Max Output Level: -90 dBFS
  • Total Posts : 20
  • Joined: 2008/08/22 06:14:11
  • Location: Kuala Lumpur
  • Status: offline
2011/07/25 13:02:21 (permalink)

To route metronome to Mixer channel. How you do this?

Hi everyone.

I'm using SONAR 8, Presonus StudioLive 16-4-2 and an Analog Mixer (Allen & Heath GL2800)- Until now still learning to use all this especially the Studiolive functions.

Ok. As I mentioned above how do you guys assign the metronome from Sonar thru the Studiolive into one of the channels on the Analog mixer, so that I get the choice to send the metronome to headphones, control room etc. (I know we do'nt really need the mixer, the Studiolive is anough for the job, but it's the company's Studio, they want it that way)

I hooked all the Mics, the instruments...Monitor Speakers to the mixer, not thru the Studiolive Master Outs, as I understand better way for monitoring, latency etc.

Any suggestions anyone. Thanks.



#1

4 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re:To route metronome to Mixer channel. How you do this? 2011/07/28 13:46:36 (permalink)
    Create a metronome bus in SONAR with its output set to a physical output on the StudioLive other than Main Outs, and assign the audio metronome to that bus (Preferences > Project > Metronome > Output). Or you can assign the metronome output directly to the StudioLive output if you don't need a bus in SONAR to control it.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    jessepeng
    Max Output Level: -90 dBFS
    • Total Posts : 2
    • Joined: 2011/07/29 04:33:11
    • Status: offline
    Re:To route metronome to Mixer channel. How you do this? 2011/07/29 04:40:23 (permalink)

    I hope this allowed, I have never used this website before so I wasn't really sure what this was going to do. So this is just a test post. I really like this forum, it has some excellent discussions that take place



    office 2010
    Office 2007
    microsoft office professional

    #3
    Beagle
    Max Output Level: 0 dBFS
    • Total Posts : 50621
    • Joined: 2006/03/29 11:03:12
    • Location: Fort Worth, TX
    • Status: offline
    Re:To route metronome to Mixer channel. How you do this? 2011/07/29 09:34:28 (permalink)
    no, it's not.  you're not just here for a test post you're here to spam us with your cracked Office software.  bug off!

    http://soundcloud.com/beaglesound/sets/featured-songs-1
    i7, 16G DDR3, Win10x64, MOTU Ultralite Hybrid MK3
    Yamaha MOXF6, Hammond XK3c, other stuff.
    #4
    alm1mal
    Max Output Level: -90 dBFS
    • Total Posts : 20
    • Joined: 2008/08/22 06:14:11
    • Location: Kuala Lumpur
    • Status: offline
    Re:To route metronome to Mixer channel. How you do this? 2011/08/01 13:51:22 (permalink)
    Thank You Brundlefly. At last I got an answer. Musicians are all soft and kind hearted! I'll be in the studio tomorrow to try your suggestion.

    All the best.
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1