UAD-1 issues

I do not own a UAD-1 interface, but I know a lot of people have troubles running this card (and plug ins) in a 64 bit environment. It seems some motherboards can handle it well and some don't. Especially newer motherboards seem to have some trouble.

It seems to help some when you re-slot (put the card in another slot) and re-install the drivers. As far as I can read the 5.50 drivers seem to work. I found an older topic on the UAD site describing problems with Windows 7 64 bit. I don't know if this is of any help: UAD treath

Sorry - I hope someone else has better news.

    There is an option in the UAD Meter program that lets you select Sonar compatibility mode for UAD-1 Cards. It basically adds some more latency.
    You also might want to move the cards to different slots on the motherboard. There could be an IRQ sharing issue going on.
-Make sure all unnecessary devices are turned off or disconnected. I disconnect my USB multifunction printer all the time.
-Turn unused ports off in the system BIOS.

-Use the DPC Latency tool to see if there are lots of interruptions http://www.thesycon.de/deu/latency_check.shtml)

    I have seen issues on a system with 1 UAD-1 and 2 UAD-1e cards where moving the older UAD-1 PCI card to a different slot resolved the issue.
     You may want to consider ditching the UAD-1 card via trade in at JRRShop.com for another UAD-2 card, which is what I am contemplating doing for my studio rig.

i loaded the 5.30 update at the UAD site, and got my UAD-1 to work in Sonar X64.. one downside is i am unable to dock the plugs in the multidock. its been over a year though there could be more updates.. try to send a PM to our member BillyBuck he knows alot about UAD-1s and 2s..

I have seen a lot of instability with the latest UAD drivers and a system with both the UAD1 & UAD2 cards as well. I just pulled the UAD1s and will sell them. All is good with the UAD2 only based system.

fooman I started with BitBridge, and it worked well for all plugs cept UAD-1.


how can i start BitBridge? i have 3 uad cards, 1 and 2, but in sonar x1 64 bit i cant use more than one uad plugin. 
is this old? i have tried it for 8 month last time.
is there someone who can really run uad plugins in sonar x64 ?
and how das it work?

I JUST figured out how to load jBridge to each individual plugin!  Thanks for telling me what to look for :)

I apologize for not loading up my UAD-1 once more, but when I do and it fails I simply have to restart in order for my system to work again :(
So I've put all plugs to my UAD-2 card.  It's quite the PITA.

I will try again later now that I'm aware of how to load up a jBridge plug.
Thanks again!

yorolpal


This is puzzling to me as on my music production DAW I have X1b 64 bit (just look below) and a UAD2 Duo, a UAD2 solo and 1 UAD1 card...and all my plugs run super under BitBridge.

Same here. Running 2 x UAD1's and a UAD2 Quad. Everything works as expected using BitBridge. Specs below. 

Success!
I enabled jBridge on the 1073's, changed it back over to run on my UAD-1 card and no dropouts!
Thank jebus!

Fingers crossed I don't run into anymore issues.
I highly suggest Cakewalk puts a link up to the jBridge site on the top of the forums here till the 32-bit 64-bit issues disappear haha.  It seems that not everyone needs it, but I sure did and I think others do as well for w/e reason.