sadicus
Max Output Level: -83 dBFS
- Total Posts : 368
- Joined: 2006/05/19 13:14:22
- Status: offline
SX1c - Stereo Loops
What is the procedure to create a loop when a file looks like this: stereoLoop There i not an instance in the wave where both sides cross 0 ath the same time.
sadicus | VYBE-AMD Ryzen Theadripper 12 Core | Win10x64 | Ultralite-mk3 | Cakewalk-Platinum
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 08:31:10
(permalink)
It looks like you may have some DC offset. That may not be the case but it also could be.
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 08:34:33
(permalink)
Just do it.
The first question would be... what's going on at the other edge of the clip? Maybe it will match at the loop point.
If you like the loop and it has a click-pop at it's edge because of something like this you may use a very quick fade in at the edge.
You can place the fades. Bounce to clip. Set the clip to groove loop. Enjoy!
best regards,
mike
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 08:37:53
(permalink)
D.C. offset?????????
LMAO.
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 09:08:28
(permalink)
mike_mccue
D.C. offset?????????
LMAO.
You don't see it Mike? I guess you find it funny. In the bottom or right channel the frequency never crosses 0 dB. What would you call it?
post edited by John - 2011/09/12 09:16:36
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 09:21:51
(permalink)
I see 27 sample points in a data set.
|
Jonbouy
Max Output Level: 0 dBFS
- Total Posts : 22562
- Joined: 2008/04/14 13:47:39
- Location: England's Sunshine South Coast
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 09:27:47
(permalink)
mike_mccue
I see 27 sample points in a data set.
Mike, please tell me you didn't count them... 
"We can't do anything to change the world until capitalism crumbles. In the meantime we should all go shopping to console ourselves" - Banksy
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 09:43:43
(permalink)
mike_mccue
I see 27 sample points in a data set.
All that matters is if there is a cycle and there appears to be one. You don't know what the frequency is nor do I but it doesn't look right to me but maybe to you its just fine, though. That maybe why the OP can't find a 0 crossing. But then you know so much Mike.
post edited by John - 2011/09/12 09:46:49
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 10:20:20
(permalink)
"All that matters is if there is a cycle and there appears to be one. You don't know what the frequency is"
You are looking at some small portion of some polyphonic voicing with all it's overtones and such.
These are entirely typical results and the appearance of the drawing is familiar to anyone who works with audio and views waveform drawings at the sample level.
The point is, there is absolutely zero need to know what the *frequency*, as you call it, is.
Nor is there a need to know the sample rate.
Furthermore, just to be clear... because you seem intent on confusing the issue... the overtones that you have pointed out are never going to be centered on the waveform drawing's "0" axis... they are "overtones".
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 10:24:10
(permalink)
mike_mccue
"All that matters is if there is a cycle and there appears to be one. You don't know what the frequency is"
You are looking at some small portion of some polyphonic voicing with all it's overtones and such.
These are entirely typical results and the appearance of the drawing is familiar to anyone who works with audio and views waveform drawings at the sample level.
The point is, there is absolutely zero need to know what the *frequency*, as you call it, is.
Nor is there a need to know the sample rate.
Furthermore, just to be clear... because you seem intent on confusing the issue... the overtones that you have pointed out are never going to be centered on the waveform drawing's "0" axis... they are "overtones".
And you know all this because you listened to that audio right? Good for you.
|
sadicus
Max Output Level: -83 dBFS
- Total Posts : 368
- Joined: 2006/05/19 13:14:22
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 11:04:14
(permalink)
@ mike_mccue
indeed there is a POP, I'll try your suggestion. I did try adding a tiny fade to remove the POP, but never bounced the track and tried to re-loop.
sadicus | VYBE-AMD Ryzen Theadripper 12 Core | Win10x64 | Ultralite-mk3 | Cakewalk-Platinum
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 11:41:43
(permalink)
You'd definitely want to bounce with the fade in place first to give you a "clean slate" for looping.
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
Bub 
Max Output Level: -3.5 dBFS
- Total Posts : 7196
- Joined: 2010/10/25 10:22:13
- Location: Sneaking up behind you!
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 13:39:06
(permalink)
Ever since setting my recording bit depth to 32bits, I haven't had any pops or clicks.
"I pulled the head off Elvis, filled Fred up to his pelvis, yaba daba do, the King is gone, and so are you."
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 13:51:18
(permalink)
Total Posts : 20000 That seems like a good place to stop. 
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
Bub
Max Output Level: -3.5 dBFS
- Total Posts : 7196
- Joined: 2010/10/25 10:22:13
- Location: Sneaking up behind you!
- Status: offline
Re:SX1c - Stereo Loops
2011/09/12 15:33:33
(permalink)
"I pulled the head off Elvis, filled Fred up to his pelvis, yaba daba do, the King is gone, and so are you."
|