silvercn
Max Output Level: -66 dBFS
- Total Posts : 1238
- Joined: 2007/12/04 12:14:24
- Location: Midland, Texas
- Status: offline
Reverb on solo acoustic guitar
Hey: I know it's a matter of personal taste, but would like some opinions on which verb plug-in and settings are liked for acoustic guitar. While on this topic, I recently found that my favorite method of recording acoustic is the mid-side set up that I read and watched a video on from the book - Big Studio Secrets for Home Recording and Production....great book/DVD.
|
Combo
Max Output Level: -87 dBFS
- Total Posts : 187
- Joined: 2010/09/08 09:48:52
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 09:13:27
(permalink)
I'll leave reverb advice to the experts but one useful thing I found recording solo acoustic is that, as well as using a reverb from Perfect Space on a reverb bus, I also used the Sonar plug-in Vintage Channel on the master bus, using the preset 'Soft Vocal with Air'. I used pretty much the default settings with the only real tweak being that I switched on the Noise Gate element (default is 'off') with very 'mild' settings (about -50 dbs and 42ms). This seemed to add to the sense of space, assuming that's what you want.
SONAR Platinum rolling updates: Intel i7 2600k on Gigabyte P67A UD 7: 16GB RAM: W7 x64 Home Premium.
|
NW Smith
Max Output Level: -79 dBFS
- Total Posts : 565
- Joined: 2006/05/08 16:01:48
- Location: Seattle, USA
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 10:06:22
(permalink)
You might want to consider using some delay instead of reverb - especially if it's an acoustic guitar solo. Delay can add some sparkle and give the listener a sense of space.
|
batsbrew
Max Output Level: 0 dBFS
- Total Posts : 10037
- Joined: 2007/06/07 16:02:32
- Location: SL,UT
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 10:22:46
(permalink)
i use WAVES Renaissance Reverb http://www.waves.com/content.aspx?id=192 starting with the 'Plate 1' setting, i tweak a warm reverb, with highs rolled off at 6khz, a predelay of 40ms, and the rest is my secret. :)
|
AT
Max Output Level: 0 dBFS
- Total Posts : 10654
- Joined: 2004/01/09 10:42:46
- Location: TeXaS
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 10:51:09
(permalink)
Perfect space w/ a plate usually works for me. That is the classic sound for old farts, but you may want something more modern. Synced delay works well, too, for a less full sound. @
https://soundcloud.com/a-pleasure-dome http://www.bnoir-film.com/ there came forth little children out of the city, and mocked him, and said unto him, Go up, thou bald head; go up, thou bald head. 24 And he turned back, and looked on them, and cursed them in the name of the Lord. And there came forth two she bears out of the wood, and tare forty and two children of them.
|
Guitarhacker
Max Output Level: 0 dBFS
- Total Posts : 24398
- Joined: 2007/12/07 12:51:18
- Location: NC
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 13:43:37
(permalink)
Nice music there BTW.... I use the verbs that came with X1. Cake default and Sonitus. I also have Ozone but really don't like the reverb in it as a "stand alone" verb. I use it very lightly at times in O4 with the other modules, but mostly not.
My website & music: www.herbhartley.com MC4/5/6/X1e.c, on a Custom DAW Focusrite Firewire Saffire Interface BMI/NSAI "Just as the blade chooses the warrior, so too, the song chooses the writer "
|
Jeff Evans
Max Output Level: -24 dBFS
- Total Posts : 5139
- Joined: 2009/04/13 18:20:16
- Location: Ballarat, Australia
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 17:20:49
(permalink)
There is no definitive answer to this question. What I tend to do is once the track is done and finished start loading up some reverb spaces and have a listen to how they sound and see what you think. Would you be wanting a larger space or a smaller space. Think about the size of the room. Plate reverbs might be better on vocals for example not so smart on solo guitar. I would be going for a hall of some kind and bring it down in size a little to suit the material. Keep an eye on high frequency damping and low end also to suit the material. And bats 42 ms of predelay is a lot for most things. Do you always use that setting? 42 ms implies that the nearest wall in your room is 21 ms away from you which is 7 meters or so. Or 14 meters approx in total travel time. Rather large. Pre delay needs to kept in mind in terms of the physical size of the room you are aiming to be in. If you start to relay predelay to room dimensions then it helps you choose a more appropriate pre delay setting. Of course you can use predelay rather creatively especially to create a larger sounding room using a shorter reverb time which can be nice thing to do sometimes.
Specs i5-2500K 3.5 Ghz - 8 Gb RAM - Win 7 64 bit - ATI Radeon HD6900 Series - RME PCI HDSP9632 - Steinberg Midex 8 Midi interface - Faderport 8- Studio One V4 - iMac 2.5Ghz Core i5 - Sierra 10.12.6 - Focusrite Clarett thunderbolt interface Poor minds talk about people, average minds talk about events, great minds talk about ideas -Eleanor Roosevelt
|
batsbrew
Max Output Level: 0 dBFS
- Total Posts : 10037
- Joined: 2007/06/07 16:02:32
- Location: SL,UT
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 17:51:51
(permalink)
of course i don't use 40 ms predelay on 'everything'... i set it wherever i need it for the effect i want for that specific track, in that specific part of the song, for that specific sound. he asked for a starting point. this is a strategic length of time that translates up or down for almost anything. if i want space, i want space. not a closet! LOL you can always listen to ANY of the songs i post with reverb, and let me know what you think, but i have to say, there are no rules, nor should there be, there should only be creativity, and enough time put in to know what you're talking about. plate, not smart on solo guitar? hm. i disagree, and my tracks will have to speak for me. now, dont' just go slapping any ole plate preset on everything...... that WOULD suck! LOL be creative with reverb. don't apply the one thing you think everybody else in the world, and their brother would use..... boring. find the sound that works for what you want, be it reverb or running an external out to a reverb tank of a guitar amp, or throwing a monitor and a mic into a big shower......
|
batsbrew
Max Output Level: 0 dBFS
- Total Posts : 10037
- Joined: 2007/06/07 16:02:32
- Location: SL,UT
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 18:33:05
(permalink)
PLATES.....for acoustic: don't really have a 'space' per se.... it's more of a sound. and it can be metallic, so THAT's why you want to be very judicious with your high end rolloff. the choice of predelay is important, because THAT's really what's giving you your space. i like a plate with long predelay more than i like a hall..... but i set it up to do a very specific thing. it's not natural... but it IS musical. i've basically boiled down the basics of using a plate for vocals (longer predelay, longer decay time, more early reflections) and smoothed it out to work with the faster transients of a close miced acoustic guitar. you get a lot of density quick, with a plate, so you have to spend A LOT OF TIME messing with it til you know what to get out of it. also, i automate my reverbs with envelopes (effect-volume automation) there's no sense in having reverb on all the time.... bring it up where it has the most impact, and take it out when things get busy. another thing to mention: i never place reverb patches in a track. i always put them on a buss, then send from the track to the buss. that way, you can eq the reverb separately from the track. i also almost always put a bit of the direct signal into the buss reverb, instead of 100% wet. why? cuz that's the way i like how it sounds. it works for me. but everything is interactive.... it all depends on how much track send i give it... and that can drive the overall energy of that one track up (or down) and affect the mix. so, it's all got to work together. found a great article on general use of reverb: http://www.soundonsound.c...s/reverbpart2_0808.htm
|
silvercn
Max Output Level: -66 dBFS
- Total Posts : 1238
- Joined: 2007/12/04 12:14:24
- Location: Midland, Texas
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 22:40:59
(permalink)
Thanks everyone for your info on verb for acoustic....! I am glad it generated good discussioin. Lots of good stuff to consider and try out. I will copy and paste these together for my recording "toolbox"........
|
AT
Max Output Level: 0 dBFS
- Total Posts : 10654
- Joined: 2004/01/09 10:42:46
- Location: TeXaS
- Status: offline
Re:Reverb on solo acoustic guitar
2011/10/26 23:52:03
(permalink)
Yea, plates can get thick quickly - that's why I said for classic sounds. Just about the only thing they had back in the 60s, if you didn't have a room. The other extreme is a delay, giving a hint of space. My problem w/ convolution is I've collected so many impulses it is hard to make a specific recommendation, although voxengo has a nice set of free ones up. For intimate sound a chamber or small room is good, too. @
https://soundcloud.com/a-pleasure-dome http://www.bnoir-film.com/ there came forth little children out of the city, and mocked him, and said unto him, Go up, thou bald head; go up, thou bald head. 24 And he turned back, and looked on them, and cursed them in the name of the Lord. And there came forth two she bears out of the wood, and tare forty and two children of them.
|
jsaras
Max Output Level: -49 dBFS
- Total Posts : 2642
- Joined: 2003/12/07 10:40:00
- Location: Pasadena, CA-The Center of the Universe!
- Status: offline
Re:Reverb on solo acoustic guitar
2011/11/02 10:49:21
(permalink)
Since you are using M/S recording techniques, I think that you'd benefit from using a true-stereo reverb. Unfortunately, none of Cakewalk's bundled reverbs are true stereo. They sum the stereo input to mono and then generate a pseudo-stereo output that is panned right down the middle, i.e., the incoming stereo panning info is lost. Download the demo for ValahallaRoom and I think that you'll find what you've been looking for. http://www.valhalladsp.com/valhallaroom
|
silvercn
Max Output Level: -66 dBFS
- Total Posts : 1238
- Joined: 2007/12/04 12:14:24
- Location: Midland, Texas
- Status: offline
Re:Reverb on solo acoustic guitar
2011/11/02 11:01:27
(permalink)
Thanks - this is new info. Gotta check that out. Right now at work, that link is blocked...darn it !
|
joeped
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2011/04/25 17:46:44
- Status: offline
Re:Reverb on solo acoustic guitar
2011/11/15 17:23:47
(permalink)
Hello, I am just a beginner at recording and would like to know how you set up for recording. I have Sonar Studio XI with foucsrite saffire 6 usb. I have my amp for my acoustic/electric guitar plugged into my focusrite and the focusrite plugged into the input of my amp. As I play, it seems as if the guitar pick up when played back is very "tinny." Any help with my set up would be appreciated. thanks. Is there some place I could go to easily find out how to set up my equipment for recording? Joe joeped@wideopenwest.com
|
LpMike75
Max Output Level: -59 dBFS
- Total Posts : 1621
- Joined: 2009/10/04 11:50:50
- Location: CT
- Status: offline
Re:Reverb on solo acoustic guitar
2011/11/15 20:28:35
(permalink)
Spaces from East West is a fantastic sounding verb with lots of different sized rooms to choose from. The down side is, it isnt free.
|
silvercn
Max Output Level: -66 dBFS
- Total Posts : 1238
- Joined: 2007/12/04 12:14:24
- Location: Midland, Texas
- Status: offline
Re:Reverb on solo acoustic guitar
2011/11/15 20:32:23
(permalink)
Thanks - that is fine, not looking for free....will look it up.
|
Combo
Max Output Level: -87 dBFS
- Total Posts : 187
- Joined: 2010/09/08 09:48:52
- Status: offline
Re:Reverb on solo acoustic guitar
2011/11/17 18:08:21
(permalink)
joeped Hello, I am just a beginner at recording and would like to know how you set up for recording. I have Sonar Studio XI with foucsrite saffire 6 usb. I have my amp for my acoustic/electric guitar plugged into my focusrite and the focusrite plugged into the input of my amp. As I play, it seems as if the guitar pick up when played back is very "tinny." Any help with my set up would be appreciated. thanks. Is there some place I could go to easily find out how to set up my equipment for recording? Joe joeped@wideopenwest.com Over in the main X1 forum Craig Anderton has posted a thread about his new book on recording guitars in Sonar. Don't remember the price offhand but a quick look at chapter headings suggests he would cover a lot of questions you may have. Might be worth checking out anyway.
SONAR Platinum rolling updates: Intel i7 2600k on Gigabyte P67A UD 7: 16GB RAM: W7 x64 Home Premium.
|