Cakewalk by BandLab
Prev Thread
Next Thread

surprise. Two ASIOCARDS RUNNING WITH MME drivers......

Author
Post
Essentials Only Full Version
Muziekschuur at home
Max Output Level: -62 dBFS
  • Total Posts : 1442
  • Joined: 3/1/2006
  • Status: offline
November 03, 11 8:29 AM (permalink)

surprise. Two ASIOCARDS RUNNING WITH MME drivers......

Today I installed for fun and giggles the MME drivers of both my RPC-1 and RME DIGI9636. And voila... 64 sample playback. I can now record with my SI-24 interface and playback over my DM24 connected over adat to the RME. All with pristine audioquality at 48khz-24 bit...
 
I run Windows 7 32 bit. I have a core 2 quad 9660 3GHZ with 4GB ram system.... I'm stunned I can use both interfaces.
 
I have tweaked the OS to run at full throttle. And I have now worked for 4 hours with the system with no hickups...
 
I'm stunned...
 
 
 

Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24.  M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport.
Remote recording Alesis HD-24 & Phonic MRS 1-20.
P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks)
Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram
 Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
#1

6 Replies Related Threads
    Beagle
    Max Output Level: 0 dBFS
    • Total Posts : 50621
    • Joined: 3/29/2006
    • Location: Fort Worth, TX
    • Status: offline
    Re:surprise. Two ASIOCARDS RUNNING WITH MME drivers...... November 03, 11 9:03 AM (permalink)
    ADAT allows you to sync the 2 cards.  that's not the surprising part - you can do that any time with any cards that have ADAT.

    it's also not surprising that they both work in MME driver mode.  the only surprising part is that they would work under MME using low latency and not have dropouts.

    http://soundcloud.com/beaglesound/sets/featured-songs-1
    i7, 16G DDR3, Win10x64, MOTU Ultralite Hybrid MK3
    Yamaha MOXF6, Hammond XK3c, other stuff.
    #2
    Muziekschuur at home
    Max Output Level: -62 dBFS
    • Total Posts : 1442
    • Joined: 3/1/2006
    • Status: offline
    Re:surprise. Two ASIOCARDS RUNNING WITH MME drivers...... November 03, 11 10:51 AM (permalink)
    One is R-bus and the other is ADAT. So they are not linked. But still do not have any dropouts at those low sample settings.... It sounds very good. So.... I dunno... I have allready completed a song. With BFD2 and OMNISPERE. Pretty heavy on the OS and DAW. But it seems to be rocksolid....

    Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24.  M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport.
    Remote recording Alesis HD-24 & Phonic MRS 1-20.
    P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks)
    Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram
     Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
    #3
    Beagle
    Max Output Level: 0 dBFS
    • Total Posts : 50621
    • Joined: 3/29/2006
    • Location: Fort Worth, TX
    • Status: offline
    Re:surprise. Two ASIOCARDS RUNNING WITH MME drivers...... November 03, 11 11:40 AM (permalink)
    if they're not linked then I suggest that you will likely have problems if you record audio on each device.  try this:  record 3 minutes of audio on one of the devices.  then play that track back while recording another audio track using the other device at the same time.  are your tracks still in sync at the end of 3 minutes?

    http://soundcloud.com/beaglesound/sets/featured-songs-1
    i7, 16G DDR3, Win10x64, MOTU Ultralite Hybrid MK3
    Yamaha MOXF6, Hammond XK3c, other stuff.
    #4
    johnnyV
    Max Output Level: -48.5 dBFS
    • Total Posts : 2677
    • Joined: 2/22/2010
    • Location: Here, in my chair
    • Status: offline
    Re:surprise. Two ASIOCARDS RUNNING WITH MME drivers...... November 03, 11 11:47 AM (permalink)
    So how many inputs would that give you if you say, recorded a live band?? And ya, would they be in sync? I'm curios to find out. For me I could potentially have 20 inputs if it worked.

    Sonar X3e Studio - Waiting for Professional
     Scarlett 6i6
    Yamaha Gear= 01v - NSM 10 - DTX 400 - MG82cx
    Roland Gear= A 49- GR 50 - TR 505 - Boss pedals
    Tascam Gear=  DR 40 - US1641 -
    Mackie Gear= Mix 8 - SRM 350's 
    i5 Z97 3.2GHZ quad 16 Gig RAM W 8.1  home build
    Taylor mini GS - G& L Tribute Tele - 72 Fender Princeton - TC BH 250 - Mooer and Outlaw Pedals  Korg 05/RW
     
    #5
    Muziekschuur at home
    Max Output Level: -62 dBFS
    • Total Posts : 1442
    • Joined: 3/1/2006
    • Status: offline
    Re:surprise. Two ASIOCARDS RUNNING WITH MME drivers...... November 03, 11 3:13 PM (permalink)
    I do have MTC setup. I have a Tascam DM24 attached. I will test your scenario.

    If this works I will have 24 in and 24 out.
    If needed I can clock the R-bus over SPDIF from the TASCAM. Then the drifting should be eliminated.
     
    I'm simply amazed that 64 samples is working...
    post edited by Muziekschuur at home - November 03, 11 3:15 PM

    Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24.  M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport.
    Remote recording Alesis HD-24 & Phonic MRS 1-20.
    P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks)
    Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram
     Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
    #6
    Muziekschuur at home
    Max Output Level: -62 dBFS
    • Total Posts : 1442
    • Joined: 3/1/2006
    • Status: offline
    Re:surprise. Two ASIOCARDS RUNNING WITH MME drivers...... November 19, 11 2:14 AM (permalink)
    recording audio did not give any problems.
    Some strange thing with Omnisphere did happen. But perhaps this was just once.... It's audiotempo did not sync.

    Cakewalk Sonar Platinum Windows 7 32bit & 64bit (dualboot) Gigabyte mobo Intel dual quad 9650 & 4GB Ram RME DIGI9636 & Tascam DM24.  M-audio Rbus & SI-24 Alesis Pro active 5.1 & Radford 90 transmissionline monitors. Roland RD-150 piano Edirol UM-880 & alesis fireport.
    Remote recording Alesis HD-24 & Phonic MRS 1-20.
    P.A. D&R Dayner 29-8-2 & behringer MX8000 (& racks)
    Rackpc Sonar Platinum with win10 AMD X6 1055T, 16GB Ram
     Dell inspiron 17R 6gb ram W10 two SSD's Sonar Plat.
    #7
    Home » [Cakewalk Products] » SONAR » surprise. Two ASIOCARDS RUNNING WITH MME drivers......
    Jump to:
    © 2025 APG vNext Commercial Version 5.1