No right channel output

Author
Post
Essentials Only Full Version
Keith Bradley
Max Output Level: -90 dBFS
  • Total Posts : 11
  • Joined: 2012/03/17 14:21:36
  • Status: offline
2012/04/30 23:05:12 (permalink)

No right channel output

Hi When I play back from Sonar through my HDSP9652 into my Yamaha 02R console I am only getting the left channel. Everything appears normal, the master is routed to ADAT 1-2 but nothing works (I tried 3-4, etc.). All my tracks are mono. If I pan a track to the right I get no signal. Any ideas? Keith
#1

14 Replies Related Threads
    digi2ns
    Max Output Level: -48.5 dBFS
    • Total Posts : 2694
    • Joined: 2010/11/24 14:27:12
    • Location: MICHIGAN
    • Status: offline
    Re:No right channel output 2012/04/30 23:35:47 (permalink)
    Right click on the Track, Convert to Mono.  Does it give you that option, if so try it and see if it fixes your prob


    MIKE

    --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64
    --X1 64 Pro Expanded, Dual 21" Monitors 
    --PCR500  
    --MAUDIO FastTrack Ultra
    --Mackie 1604 VLZ PRO
    --Line6 X3 Live
    --Gibson, Fender, Takamine, Schecter, Washburn
    http://pogopoppa.wix.com/5thgear#
     http://soundcloud.com/digi2ns  
     
     
     
     

    #2
    Keith Bradley
    Max Output Level: -90 dBFS
    • Total Posts : 11
    • Joined: 2012/03/17 14:21:36
    • Status: offline
    Re:No right channel output 2012/04/30 23:57:07 (permalink)
      Initially when I didn't know anything, ie 4 hours ago, I recorded a combo of mono and stereo tracks like ADAT 1L, ADAT 1R, ADAT 1stereo. That was wrong so I did it again excluding the stereo input and that worked - everything mono. I'm away from the DAW but I do believe it has the convert to mono option but why would I need to do that if it's in mono already? thanks Mike. Keith Sonar Production Suite HP Z800 RME HDSP9652 YAMAHA 02R
    #3
    digi2ns
    Max Output Level: -48.5 dBFS
    • Total Posts : 2694
    • Joined: 2010/11/24 14:27:12
    • Location: MICHIGAN
    • Status: offline
    Re:No right channel output 2012/05/01 00:22:27 (permalink)
    I believe if you record just one side of a stereo channel, you wont be able to pan and it will only play out that particular side.

    Your welcome, Happy ya found it 


    MIKE

    --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64
    --X1 64 Pro Expanded, Dual 21" Monitors 
    --PCR500  
    --MAUDIO FastTrack Ultra
    --Mackie 1604 VLZ PRO
    --Line6 X3 Live
    --Gibson, Fender, Takamine, Schecter, Washburn
    http://pogopoppa.wix.com/5thgear#
     http://soundcloud.com/digi2ns  
     
     
     
     

    #4
    57Gregy
    Max Output Level: 0 dBFS
    • Total Posts : 14404
    • Joined: 2004/05/31 17:04:17
    • Location: Raleigh, North Carolina
    • Status: offline
    Re:No right channel output 2012/05/01 09:25:07 (permalink)
    I do believe it has the convert to mono option but why would I need to do that if it's in mono already?

     
    If it's a mono instrument in a stereo track and only one side is playing, converting the stereo track to mono will make the sound come out both sides.
    You're not converting the instrument, you're converting the track.

    Greg 
    I am selling my MIM Fender Stratocaster HSS, red and black. PM for more details.

    Music Creator 2003, MC Pro 24, SONAR Home Studio 6 XL, SONAR  X3e, CbB, Focusrite Saffire, not enough space.
    Everything is better with pie. 

    http://www.soundclick.com/bands/default.cfm?bandID=609446
    http://www.reverbnation.com/#!/gregfields 
    #5
    keithBradley
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2012/05/01 10:40:16
    • Status: offline
    Re:No right channel output 2012/05/01 11:33:11 (permalink)
    Aren't they all stereo channels, it's just what signal you choose to input - stereo, mono L or mono R?
    My tracks as they appear in the waveform are all mono. Each track meter shows 2 identical levels  of 1 mono signal.  I know I'm missing the obvious and I apologize, but I did record each track either ADAT L or ADAT R. I understand that a mono signal is always left in stereo. I did record stereo channels but I still only had a one channel output from my card (hdsp9562). Also, I have been an AVID editor in tv for many years so I'm used to mixing and outputting in mono and stereo but this is a whole new way of thinking and I'm having troubles picking it up.
    Thanks Mike and Greg
    Keith
    #6
    digi2ns
    Max Output Level: -48.5 dBFS
    • Total Posts : 2694
    • Joined: 2010/11/24 14:27:12
    • Location: MICHIGAN
    • Status: offline
    Re:No right channel output 2012/05/01 13:52:58 (permalink)
    To keep it simple its as Greg is saying-

    You cant pan just a left or a right channel from a stereo track-it has to be a mono track.

    The effect you will have if you dont is just a raising or lowering of the volume as you try to pan if its not mono when you do pan it, make sense? As you PAN a left channel stereo track to the right, its gain will decrease sounding like you are lowering the volume without any panning happening.


    MIKE

    --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64
    --X1 64 Pro Expanded, Dual 21" Monitors 
    --PCR500  
    --MAUDIO FastTrack Ultra
    --Mackie 1604 VLZ PRO
    --Line6 X3 Live
    --Gibson, Fender, Takamine, Schecter, Washburn
    http://pogopoppa.wix.com/5thgear#
     http://soundcloud.com/digi2ns  
     
     
     
     

    #7
    keithBradley
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2012/05/01 10:40:16
    • Status: offline
    Re:No right channel output 2012/05/01 15:44:04 (permalink)
    So how do I create a mono track? I know you can do it in protools, etc. But I don't see that option in Sonar. When I select Insert Track there are no other options than a stereo track. Thanks,
    Keith
    #8
    digi2ns
    Max Output Level: -48.5 dBFS
    • Total Posts : 2694
    • Joined: 2010/11/24 14:27:12
    • Location: MICHIGAN
    • Status: offline
    Re:No right channel output 2012/05/01 16:11:05 (permalink)
    Click on the Track No#, Then Right Click on it. The option should be there to Convert to Mono


    MIKE

    --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64
    --X1 64 Pro Expanded, Dual 21" Monitors 
    --PCR500  
    --MAUDIO FastTrack Ultra
    --Mackie 1604 VLZ PRO
    --Line6 X3 Live
    --Gibson, Fender, Takamine, Schecter, Washburn
    http://pogopoppa.wix.com/5thgear#
     http://soundcloud.com/digi2ns  
     
     
     
     

    #9
    keithBradley
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2012/05/01 10:40:16
    • Status: offline
    Re:No right channel output 2012/05/01 16:48:33 (permalink)
    Sounds to me like you are saying convert to mono before recording. That makes so much sense. I will be home soon to try it out. Thanks again, Mike
    Keith
    #10
    digi2ns
    Max Output Level: -48.5 dBFS
    • Total Posts : 2694
    • Joined: 2010/11/24 14:27:12
    • Location: MICHIGAN
    • Status: offline
    Re:No right channel output 2012/05/01 17:07:40 (permalink)
    Your welcome Keith.

    Let us know how it works out for ya 


    MIKE

    --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64
    --X1 64 Pro Expanded, Dual 21" Monitors 
    --PCR500  
    --MAUDIO FastTrack Ultra
    --Mackie 1604 VLZ PRO
    --Line6 X3 Live
    --Gibson, Fender, Takamine, Schecter, Washburn
    http://pogopoppa.wix.com/5thgear#
     http://soundcloud.com/digi2ns  
     
     
     
     

    #11
    allychi
    Max Output Level: -90 dBFS
    • Total Posts : 6
    • Joined: 2012/05/09 21:09:35
    • Status: offline
    Re:No right channel output 2012/05/09 21:37:50 (permalink)
    Buy Cheapest & Original chi hair straightener in Farouk CHI Hair Online Shop, Shopping for CHI Black Flat Iron over 70% OFF in store  CHI Hair Dryer for sale, you can find the biggest savings on CHI Pink Flat Iron for sale, you can find the biggest savings on  CHI Turbo Ceramic Flat Iron.
    #12
    allychi
    Max Output Level: -90 dBFS
    • Total Posts : 6
    • Joined: 2012/05/09 21:09:35
    • Status: offline
    Re:No right channel output 2012/05/09 21:43:16 (permalink)
    When speaking within the trends in Wholesale Tiffany Jewelryappear to possess undergone the greatest alter in latest years.Tiffany Necklaces arrives in the amazing assortment of shapes and styles, this recent style is for Tiffany Co Braceletnot oversized in length, but in width. The period of dangling Tiffany and Conow is not remarkable. we has developed different exquisite silver Tiffany Rings.Our silver Tiffany and Co Sets are crafted in the highest-quality pure sterling silver.
    #13
    allychi
    Max Output Level: -90 dBFS
    • Total Posts : 6
    • Joined: 2012/05/09 21:09:35
    • Status: offline
    Re:No right channel output 2012/05/09 21:45:15 (permalink)
    Mac Cosmetics wholesaleand Mac Lipstick Swatches,Buy Mac Lip Hello Kitty Gloss get Free Gift,Free Shipping at our Cheap Mac Cosmetics Discount Store.Get the exact authenticMac False Eyelashes,Mac Makeup Brush Sets sources that I use in my business every day.
    #14
    rs4playniuwa
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2012/05/14 03:53:01
    • Status: offline
    Re:No right channel output 2012/05/14 03:57:07 (permalink)
    The building Lord really invincible, thought very have routines and lol.




    _______________________________________________________________________________________
    You may also like:Rs Gold|runescape gold
    #15
    Jump to:
    © 2025 APG vNext Commercial Version 5.1