Sonar X1 and Amp Farm 2

Author
Post
Essentials Only Full Version
dmarks
Max Output Level: -90 dBFS
  • Total Posts : 8
  • Joined: 2012/03/18 15:26:55
  • Status: offline
2012/05/04 20:20:34 (permalink)

Sonar X1 and Amp Farm 2

When I insert Amp Farm as an FX it sounds great but I can't see how to mute the dry signal. So, I hear the clean guitar along with the sound effect created by Amp Farm.
#1

3 Replies Related Threads
    hockeyjx
    Max Output Level: -74 dBFS
    • Total Posts : 839
    • Joined: 2003/12/09 18:36:28
    • Status: offline
    Re:Sonar X1 and Amp Farm 2 2012/05/04 23:20:22 (permalink)
    I had the in guitar rig at some point, and I think I just adjusted the input and output levels.

    Intel i7 950 Proc, Asus Sabertooth x58 MB, 2 Crucial 128GB SSDs and Seagate 1TBGB drive, 12GB Corsair 1600mhz 8-8-8-24 Memory, Nvidia GeForece 8400 Dual Monitor vid card
    Cooler Master Silent Pro 700w Power Supply, Cooler Master Sileo 500

    Win 7 64 bit, SPlat 64-bit, Komplete 10 Ultimate, AmpliTube3 and AD2

    Tascam FW-1884 and AKAI MPK-49
    #2
    dmarks
    Max Output Level: -90 dBFS
    • Total Posts : 8
    • Joined: 2012/03/18 15:26:55
    • Status: offline
    Re:Sonar X1 and Amp Farm 2 2012/05/05 14:33:04 (permalink)
    I don't believe that's the problem. If I adjust the input signal going to Amp Farm from Sonar it just reduces signal going to the effect. The dry signal still sounds along with the effect, the effect is just lower. If I adjust the input and output of Amp Farm that doesn't change hearing the clean sounding guitar (dry signal).
    #3
    dmarks
    Max Output Level: -90 dBFS
    • Total Posts : 8
    • Joined: 2012/03/18 15:26:55
    • Status: offline
    Re:Sonar X1 and Amp Farm 2 2012/05/05 21:49:47 (permalink)
    I figured it out. Here's how to record the clean guitar signal and only hear the amp farm effect: - Insert an audio track with output to none - Input is set to the input that my guitar is plugged into in my audio interface. - Right click on the track and select "Insert Send" - Select "Insert Send Assistant" - Send to "New Buss" - Select Output (I selected Master) - Choose effect: Amp Farm - Pre Fader A new buss is created. Only output from Amp Farm is heard at new buss. Level is controlled from this buss.
    #4
    Jump to:
    © 2025 APG vNext Commercial Version 5.1