Panning doesn't work on two tracks

Author
Post
Essentials Only Full Version
mtgonzalez
Max Output Level: -86 dBFS
  • Total Posts : 249
  • Joined: 2009/03/16 19:29:43
  • Location: Mission Viejo, CA
  • Status: offline
2012/05/11 10:29:02 (permalink)

Panning doesn't work on two tracks

I have two guitar tracks that won't pan (L/R). All the other tracks pan without any problems. Before I mono export the tracks and replace them on the project I want to see if there is anything I'm not catching. I recorded the tracks in mono and they show up as a mono wave file. I checked and made sure there were no automation envelopes or track bus routing. I have a PodFarm plugin in the FX bin for distortion, and that's mono. Any thoughts would help

Win 10 - 64-bit - Intel Core I5 3.3GHz 
1TB HD 500 GB SSD - 8GB Ram - 7200RPM
X3 Producer & Sonar Platinum
www.mtgrecordingstudio.com
#1

4 Replies Related Threads
    Philip
    Max Output Level: -34.5 dBFS
    • Total Posts : 4062
    • Joined: 2007/03/21 13:09:13
    • Status: offline
    Re:Panning doesn't work on two tracks 2012/05/12 09:04:23 (permalink)
    Are your tracks themselves stereo or mono?  Switch your tracks to stereo or drag-drop your clips into a new stereo track.

    If PodFarm VST forces mono (with no stereo option) ... you may need to bounce/freeze these ... then make the track stereo again (or something like that).

    (hope this helps)

    Philip  
    (Isa 5:12 And the harp, and the viol, the tabret, and pipe, and wine, are in their feasts: but they regard not the work of the LORD)

    Raised-Again 3: http://soundclick.com/share.cfm?id=12307501
    #2
    mtgonzalez
    Max Output Level: -86 dBFS
    • Total Posts : 249
    • Joined: 2009/03/16 19:29:43
    • Location: Mission Viejo, CA
    • Status: offline
    Re:Panning doesn't work on two tracks 2012/05/14 12:10:47 (permalink)
    Thank Philip, I tried both of those suggestions and nothing worked. I even tried to export individual tracks and place them back in the project. That didn't work. So I ended up opening a new project with a Sonar template (I was using a custom template on this project that I created) and now the tracks are panning. So I need to look at my custom template and see why it won't let me pan

    Win 10 - 64-bit - Intel Core I5 3.3GHz 
    1TB HD 500 GB SSD - 8GB Ram - 7200RPM
    X3 Producer & Sonar Platinum
    www.mtgrecordingstudio.com
    #3
    Chappel
    Max Output Level: -52.5 dBFS
    • Total Posts : 2300
    • Joined: 2009/07/11 14:55:32
    • Location: California
    • Status: offline
    Re:Panning doesn't work on two tracks 2012/05/14 12:37:32 (permalink)
    mtgonzalez


    I have two guitar tracks that won't pan (L/R). All the other tracks pan without any problems. Before I mono export the tracks and replace them on the project I want to see if there is anything I'm not catching. I recorded the tracks in mono and they show up as a mono wave file. I checked and made sure there were no automation envelopes or track bus routing. I have a PodFarm plugin in the FX bin for distortion, and that's mono. Any thoughts would help

    The only way I can duplicate your problem, in 8.5, is to route a mono track to a bus with interleave set to mono, and you've already ruled that out.....
    #4
    bitflipper
    01100010 01101001 01110100 01100110 01101100 01101
    • Total Posts : 26036
    • Joined: 2006/09/17 11:23:23
    • Location: Everett, WA USA
    • Status: offline
    Re:Panning doesn't work on two tracks 2012/05/14 18:08:23 (permalink)
    Are these tracks routed ONLY to a single stereo bus, and not to any effects busses?


    All else is in doubt, so this is the truth I cling to. 

    My Stuff
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1