HELP: Amplitube through Sonar X1. No input movement

Author
Post
Essentials Only Full Version
aceridgey
Max Output Level: -90 dBFS
  • Total Posts : 32
  • Joined: 2012/05/07 12:51:50
  • Status: offline
2012/05/11 17:56:18 (permalink)

HELP: Amplitube through Sonar X1. No input movement

Good evening Ladies and Gents, I am relatively new to this DAW. I am using Amplitube 3 and I can get perfect sound when running it through the standalone mode. However, when I put it in the fx box, I cannot gain input unless I click on [echo] which is a guess. I do get a sound with echo but only if I put the latency to a ridiculous amount to the right. I look forward to your help, Kindest regards, Alex
#1

7 Replies Related Threads
    Wave
    Max Output Level: -87 dBFS
    • Total Posts : 174
    • Joined: 2012/04/10 10:14:55
    • Location: Sunny Bono Drive; first left on right
    • Status: offline
    Re:HELP: Amplitube through Sonar X1. No input movement 2012/05/11 18:23:24 (permalink)
    As far as echo you'll need that on if your playing a synth with a controller/keyboard. 
     
    As far as latency you need to give all your specs first on your entire system; like I have on my post for us to help.

    Cheers,

    Wave




    Sonar Producer Expanded X1d 64
    Windows 7 Pro SP1, i7-2600k 3.4GHz, Crucial SSD Drives,
    16 GB1866MHz Ram, Radeon HD6800-3 displays
    Lynx L22 Sound Card , Mackie HR624 Monitors
    PCR-500 Keyboard Controller
    #2
    aceridgey
    Max Output Level: -90 dBFS
    • Total Posts : 32
    • Joined: 2012/05/07 12:51:50
    • Status: offline
    Re:HELP: Amplitube through Sonar X1. No input movement 2012/05/11 18:38:36 (permalink)
    Cheers Wave. I think it may have something to do with the usb audio interface setting, but I really haven't a clue on this one, I feel like a numpty. Anyway, Desktop Windows 7 64 Intel I7 930 @4.09ghz 12GB Corsair 4gbx3 Asus Xesse sound card Hardware Roland Quad Capture [new] Alex
    #3
    chuckebaby
    Max Output Level: 0 dBFS
    • Total Posts : 13146
    • Joined: 2011/01/04 14:55:28
    • Status: offline
    Re:HELP: Amplitube through Sonar X1. No input movement 2012/05/11 19:06:14 (permalink)
    that echo button is supposed to be on.
    you audio interface should have latency controls,its in preference,drivers.
    you need to move the slider away from the safe side and more geared toward performance.

    Windows 8.1 X64 Sonar Platinum x64
    Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
    Focusrite Saffire 18I8 - Mackie Control
       
    #4
    aceridgey
    Max Output Level: -90 dBFS
    • Total Posts : 32
    • Joined: 2012/05/07 12:51:50
    • Status: offline
    Re:HELP: Amplitube through Sonar X1. No input movement 2012/05/11 19:13:42 (permalink)
    Hi guys, Its defintely got to do with the latency and driver settings.. I am wanting to run audio through the Quad Capture, [external usb], but I can only select MME driver to get access to the quad capture options?? Here is a print screen. These work ok, but I expected to get better latency? Alex

    Windows 7 64bit Intel I7 2500k @4.70 16GB [3X4GB Corsair] GTX 480 Asus Xense Roland Quad Capture USB Audio
    #5
    dke
    Max Output Level: -76 dBFS
    • Total Posts : 724
    • Joined: 2007/07/07 15:17:51
    • Status: offline
    Re:HELP: Amplitube through Sonar X1. No input movement 2012/05/11 19:29:32 (permalink)
    Under Recording and Playback you need to select ASIO or WDM as the driver mode.  ASIO will probably give you lower latency.  Then on the Device Settings you set the latency lower.  If you're using ASIO you'll need to open the ASIO settings panel to set the latency (there will be a button on the page in place of the Profile button, to do so).

    Dan

    Sonar Platinum ( x64),  Windows 10 x64, HP Envy i5 2.9GHZ, 8GB, Tascam 4x4 USB, BX5a Monitors.
    #6
    aceridgey
    Max Output Level: -90 dBFS
    • Total Posts : 32
    • Joined: 2012/05/07 12:51:50
    • Status: offline
    Re:HELP: Amplitube through Sonar X1. No input movement 2012/05/11 19:42:49 (permalink)
      Hey guys. I sorted the addictive drums through a variety of trial and error. Still no imputs for the Amplitube :/. Working fine with If someone could show me their roland settings [sample rate and Audio buffer size] That would be perfect. Alex
    post edited by aceridgey - 2012/05/11 20:11:47

    Windows 7 64bit Intel I7 2500k @4.70 16GB [3X4GB Corsair] GTX 480 Asus Xense Roland Quad Capture USB Audio
    #7
    mudgel
    Max Output Level: 0 dBFS
    • Total Posts : 12010
    • Joined: 2004/08/13 00:56:05
    • Location: Linton Victoria (Near Ballarat)
    • Status: offline
    Re:HELP: Amplitube through Sonar X1. No input movement 2012/05/11 23:10:05 (permalink)
    Amplitube is an fx plugin that takes an audio input so whichever audio track you put it on will either have to have a live input eg a guitar or an already recorded audio track
    If you want to hear what effect it's producing you'll need input echo turned on.

    Mike V. (MUDGEL)

    STUDIO: Win 10 Pro x64, SPlat & CbB x64,
    PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz.
    Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2.
    Monitors: Adam A7X, JBL 10” Sub.
    Audio I/O & DSP Server: DIGIGRID IOS & IOX.
    Screen: Raven MTi + 43" HD 4K TV Monitor.
    Keyboard Controller: Native Instruments Komplete Kontrol S88.
    #8
    Jump to:
    © 2025 APG vNext Commercial Version 5.1