Suggestions for audio interface please

I recently built a new PC (specs in sig) and still using my 8 year old Delta 1010...even though the new mobo has a PCI slot I've read that it can be troublesome with PCI.
I don't need more than 1 pre-amp and a MIDI connection...any suggetions?
Thanks very much,
Randy

This  http://forum.cakewalk.com/tm.aspx?m=2584566 is just few subject lines down the page.

I have a Delta 1010 still hanging in there and performing well. If I were to change tomorrow - I would buy a Presonus 44vsl based on good performance recommendations. Lots of folks like Focusrite, MOTU and Roland products. I think everybody likes RME. Price point versus value, the Presonus looks solid and can be had for around $275.

Thanks guys, lots of helpful info.
I'm thinking for no more than I need wouldn't this $85 Tascam product work well...I like the design and Tascam has been around forever ...anyone had experience with one? http://www.bhphotovideo.com/c/product/657978-REG/Tascam_US_122MKII_US_122MKII_USB_2_0.html
The reviews I read are good except one in 2010 regarding the drivers.
Thanks again,
Randy 


EDIT: ah hell... not sure why I didn't think about/notice this but it doesn't even have TRS out to feed my monitors.

EDIT 2: so since a lot of people seem to like Focusrite what about this http://www.bhphotovideo.com/c/product/847355-REG/Focusrite_SAFFIRE_6_USB_2_0_Saffire_6_USB.html 
my main concern is it shows to be 1 x USB 1.1 compliant port ...Would it work with a USB 3 port (I'm limited on USB but have several USB 3 ports available)?

g_randybrown


Thanks guys, lots of helpful info.
I'm thinking for no more than I need wouldn't this $85 Tascam product work well...I like the design and Tascam has been around forever ...anyone had experience with one? http://www.bhphotovideo.com/c/product/657978-REG/Tascam_US_122MKII_US_122MKII_USB_2_0.html
The reviews I read are good except one in 2010 regarding the drivers.
Thanks again,
Randy 


EDIT: ah hell... not sure why I didn't think about/notice this but it doesn't even have TRS out to feed my monitors.

EDIT 2: so since a lot of people seem to like Focusrite what about this http://www.bhphotovideo.com/c/product/847355-REG/Focusrite_SAFFIRE_6_USB_2_0_Saffire_6_USB.html 
my main concern is it shows to be 1 x USB 1.1 compliant port ...Would it work with a USB 3 port (I'm limited on USB but have several USB 3 ports available)?

Tascam was the only sound device that I have run up against that I couldn't get configured.  I have a buddy who bought one of the USB Tascam boxes and he was getting pops and clicks like mad.  I went over to his house fully expecting that within 15 minutes I'd have him up and running.  An hour later I was still unable to get it working properly.  He sold the unit on ebay and bought the Roland equivalent product and plugged it in and it worked right from the start.

There are low end Quad Capture and I believe a Dual Capture.

There is one out there called Scarlatti that looks nice.

I recomend Sweetwater for the purchase. Outstanding service and great Warranty. Sorry for the shameless plug but it has really paid off for me in the warranty area.