merseybeat
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2010/06/29 04:29:59
- Status: offline
Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
Hi, I have the strangest issue with X! build 184
After a Windows boot, I launch X1 and have no problems!
(Windows 7 64 bit, Roland UA-25EX Audio Capture (ASIO), Intel Core 2 Quad Q9300 @ 2.50GHz, 8GB ram)
When I close X1 and come back to it later X1 cannot find the ASIO driver (Even though it was all fine on the first load after a boot)
Its only X1 thats the problem? Reason 6.5 and Sony Audition don't have issues with the ASIO and execute with no problems!
Funny how its only X1 with its very own Cakewalk/Roland UA-25-EX have the problem!
Any suggestions would be most welcome!
As a final note, if I throw X1 into WDM/KS or any of the other drivers it works perfect! But I need ASIO as I use live monitoring and need low latency! Also This is what I paid for!!!
Regards
Eddie
|
Fog
Max Output Level: 0 dBFS
- Total Posts : 12302
- Joined: 2008/02/27 21:53:35
- Location: UK
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 04:23:43
(permalink)
you don't say if you are running the latest version of the drivers http://www.rolandus.com/products/productdetails.php?ProductId=970 "this is what you paid for"... fair enough, but this is the end users forum *NOT* tech support, so perhaps contact them directly , as well sounds like it isn't releasing the driver, and well WDM is different.
|
Linear Phase
Max Output Level: -53 dBFS
- Total Posts : 2201
- Joined: 2012/04/15 02:21:15
- Location: Ft. Lauderdale, FL USA
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 04:27:35
(permalink)
☄ Helpful
merseybeat
Hi, I have the strangest issue with X! build 184
My X1 is on build 535.. Looks like you might try downloading and installing the proper versions from Cakewalk.com ( Your store account. and Customer Update Pages. )
too many lasers...  Sonar = audio editing ninja of a music software!
|
merseybeat
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2010/06/29 04:29:59
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 04:33:03
(permalink)
Thanks LP Much appreciated! Dearest "Fog" Woah! A forum is also about asking for help from other users who may have encounter similar problems! Why the venom? I believe I am an end user! There has only ever been one driver and yes I have it.... UA-25EX Driver Version 1.0.0 for Windows 7 64-bit Edition As I said in my post the problem is only with Sonar X1 ("That's "Cakewalk" Sonar X1 by the way) The UA-25X works with all my other software so I thought that the problem might be "Sonar" related? Hence a post in a "Sonar X1" Forum! Please be nice! It costs nothing! You ever needed advice??? Eddie
|
Linear Phase
Max Output Level: -53 dBFS
- Total Posts : 2201
- Joined: 2012/04/15 02:21:15
- Location: Ft. Lauderdale, FL USA
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 04:37:15
(permalink)
☄ Helpful
dl the update.. let us know
cheers
too many lasers... Sonar = audio editing ninja of a music software!
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 07:27:14
(permalink)
☄ Helpful
SONAR X1 has 3 flavours (actually 4)
Essential
studio
Producer
Producer Expanded
It has also gone through a number of updates.
First release X1 then X1a, X1b, X1c, X1d
You need to download X1c (its a rollup of all previous updates) and X1d.
Install X1c and before opening SONAR run the X1d installer then open SONAR. It's likely that your problem will be fixed. If not come back to us and we'll be working from the same page. All the best.
As for some touchy responses from others - you too may like to dial back the sarcasm as per your opening post - this is a peer to peer forum and we don't have any control over software or hardware and how its made or delivered. What we have is a healthy community that responds and helps folks based on our collective experiences. That's worthy of some respect right from the start. Hope you get it worked out and as I said once you've downloaded and installed the updates come back if problems not solved.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 07:43:26
(permalink)
dont let one or two users get you upset,ive had similar problems myself.
just snap back like you did and roll with the punches..
there are peeps here to help..good luck and get back.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
OlSkoolGuy
Max Output Level: -88 dBFS
- Total Posts : 136
- Joined: 2012/04/11 05:38:48
- Location: high on a ridge in Middle Tennessee
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 07:52:14
(permalink)
☄ Helpful
Eddie,
I agree with the suggestions above - particularly dl-ing & installing the updates for X1 - but there is one more thing I would like to mention, just in case. It is something I had problems with myself, so I know it can make a difference.
Under EDIT > PREFERENCES > AUDIO > PLAYBACK AND RECORDING, there is a box to check to "Share drivers with other programs". Once I checked that box and restarted, I was able to jump between X1 and various other audio programs with much less difficulty. Just something to look for.
OlSkoolGuy ********* X2a Prod - Win7 64 (i7 w/8GB) - A&H ZED 14 - Focusrite Scarlett 8i6 - Cakewalk UM-2G - Yamaha HS 80M monitors - Shure SM7B (and many other condenser AND dynamic mics) - tons of other hardware/software. *********
|
merseybeat
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2010/06/29 04:29:59
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 09:20:25
(permalink)
Thanks guys! Much appreciated!
Cant understand the sarcasm bit though???
"Funny how its only X1 with its very own Cakewalk/Roland UA-25-EX have the problem!"
Funny=Unusual where I come from. Liverpool UK, no means a sarcastic comment! Just unusual is all I meant!
Cheers
Eddie
|
OlSkoolGuy
Max Output Level: -88 dBFS
- Total Posts : 136
- Joined: 2012/04/11 05:38:48
- Location: high on a ridge in Middle Tennessee
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 09:49:26
(permalink)
☄ Helpful
Hey, don't sweat it. I personally didn't read anything into your comments.
But - if you will allow me to underscore your thoughts on the matter...
A good example of sarcasm might be (if said with a sneer in one's voice): "GEE... with a nickname like "merseybeat" I would NEVER have guessed you were from LIVERPOOL!!!"
Of course, if the same thing were said with a straight face, as if being sincere, it would be irony, not sarcasm.
Cheers!
OlSkoolGuy ********* X2a Prod - Win7 64 (i7 w/8GB) - A&H ZED 14 - Focusrite Scarlett 8i6 - Cakewalk UM-2G - Yamaha HS 80M monitors - Shure SM7B (and many other condenser AND dynamic mics) - tons of other hardware/software. *********
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 10:34:38
(permalink)
☄ Helpful
what your seeing is the overflow of some users comming on here and bad mouthing sonar out of frustration.
your comment could have been taken either way as an insult or a joke.
alot of us here(including myself)love and defend this software constantly from the pro tools lovers that come over here just to ruffle some feathers for fun.
so some of us(including myself) get color blind.
Fog is actually a pretty good guy.dont sweat it.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
Guitarhacker
Max Output Level: 0 dBFS
- Total Posts : 24398
- Joined: 2007/12/07 12:51:18
- Location: NC
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/29 11:39:34
(permalink)
☄ Helpful
For what it's worth....
I have experienced similar issues with the ASIO driver. If I need to shut down X1 for any reason, Most times it will come back up and run OK, but occasionally the communication link between the computer & software and the interface gets broken.
A restart of both DAW and interface get it rolling. During the restart... I take a few minutes to stretch the legs and get a beverage refill.
My website & music: www.herbhartley.com MC4/5/6/X1e.c, on a Custom DAW Focusrite Firewire Saffire Interface BMI/NSAI "Just as the blade chooses the warrior, so too, the song chooses the writer "
|
merseybeat
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2010/06/29 04:29:59
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/30 02:00:33
(permalink)
Lol! you guys rock! All updates installed and all seems OK!
I have been using Cakewalk since the Pro Audio days when you only had four tracks of Audio to play with! Its still my favorite DAW! So please consider me a fellow user :)
Thanks for all the good advice!
Eddie
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:Can only run X1 once after reboot with ASIO then a second session cannot find ASIO?
2012/08/30 02:33:18
(permalink)
Glad it worked:
I didn't personally take your comments as sarcastic but I figured that fog's comment may have come from having thought your comments were.
I hope you can see that it's no big deal as I did continue to make a number of what I hoped were useful suggestions.
i find generally that text alone lumps us with all sorts of baggage that may or may not be real.
Anyway the main thing is that you've got your problem sorted out. It sounded so much like my first forays into SONAR X1 before any patches were released especially before X1c.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|