Loptec
Max Output Level: -72 dBFS
- Total Posts : 948
- Joined: 2011/02/07 13:29:01
- Location: Sweden
- Status: offline
ACT in X2 PC doesn't work on VS-700C
Okay.. I've now installed X2 on my stationary music computer where I use my VS-700C. Just after a few minutes I discovered that I can't jump between the units in PC with the EQ button (like in X1). The EQ-button isn't lit up as it used to be before either.. Non of the EQ, Send or ACT leds are lit up... =/ What's up with that? Anyone else got this problem or am I doing somthing wrong? Edit:_________________________________
Also.. Even though neither EQ, SEND or ACT is lit up I can change some of the parameters
in the quad-EQ. the ACT assignements are all screwed up though... =/
post edited by Loptec - 2012/09/25 06:16:43
SAMUEL LIDSTRÖM
 DAW: Sonar Platinum (64bit) with Melodyne Studio - Controllers: Roland VS-700C, Cakewalk A-500 Pro, Yamaha P90Desktop Audio Interface: RME HDSPe RayDAT - Laptop Audio Interface: RME Babyface Pro
|
Norrie
Max Output Level: -58.5 dBFS
- Total Posts : 1665
- Joined: 2010/04/20 15:48:15
- Location: Scotland
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/25 15:30:54
(permalink)
Hey loptec.
I am just geting round to trying out the Controll Channel
I am finding the same and other problems
I cant jump from one module to the next
My lights though are lighting up but the EQ light will not light up again after hitting EQ send. After I press EQ again all the labels on the screen vanish and the Eq button is not lighting up
I am finding all the buttons on screen do not tie in with what is on the VS- 700 Channel strip. There all over the place and I am finding I cant even control some things.
Can you on anyone please confirm this ?
SONAR X3c Producer Pro Tools 11 Allen & Heath GS-R24 M Adam A77x i7 4930K @ 4.4Ghz
|
Loptec
Max Output Level: -72 dBFS
- Total Posts : 948
- Joined: 2011/02/07 13:29:01
- Location: Sweden
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/25 15:35:35
(permalink)
yup. I can confirm this... :/
can someone from cakewalk PLEASE respond to this and tell us what's going on... =/
SAMUEL LIDSTRÖM
DAW: Sonar Platinum (64bit) with Melodyne Studio - Controllers: Roland VS-700C, Cakewalk A-500 Pro, Yamaha P90Desktop Audio Interface: RME HDSPe RayDAT - Laptop Audio Interface: RME Babyface Pro
|
Dyonight
Max Output Level: -80 dBFS
- Total Posts : 529
- Joined: 2009/02/02 13:28:52
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/25 15:39:55
(permalink)
Damn... that's a MAJOR problem....
Sonar Platinum (Latest monthly update) / Roland A300-pro / AMD FX-8350 / Firepro V4900 / 16gb ram / RME HDSPe MadiFx
|
Norrie
Max Output Level: -58.5 dBFS
- Total Posts : 1665
- Joined: 2010/04/20 15:48:15
- Location: Scotland
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/25 15:42:59
(permalink)
Are you finding the controls are also not matching up or is that just me ?
I have also found that there seems to be no way to control anything other than the top module... Selecting it with the mouse will not let me then control it with the VS.
SONAR X3c Producer Pro Tools 11 Allen & Heath GS-R24 M Adam A77x i7 4930K @ 4.4Ghz
|
Crg
Max Output Level: 0 dBFS
- Total Posts : 7719
- Joined: 2007/11/15 07:59:17
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/25 18:04:27
(permalink)
When you all installed X2, were there installation files for it in the custom installation lists as in previous versions?
|
Norrie
Max Output Level: -58.5 dBFS
- Total Posts : 1665
- Joined: 2010/04/20 15:48:15
- Location: Scotland
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/25 18:06:49
(permalink)
Drivers etc were there under VS-700 same as it looks on the X1 install
post edited by Norrie - 2012/09/25 18:07:50
SONAR X3c Producer Pro Tools 11 Allen & Heath GS-R24 M Adam A77x i7 4930K @ 4.4Ghz
|
Loptec
Max Output Level: -72 dBFS
- Total Posts : 948
- Joined: 2011/02/07 13:29:01
- Location: Sweden
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/26 02:38:49
(permalink)
Crg
When you all installed X2, were there installation files for it in the custom installation lists as in previous versions?
yes. there were a few special installation options for the vs-system in the custom installation. I installed these edit: sorry Norrie. didn't see you'd already replied to this.. :)
post edited by Loptec - 2012/09/26 02:47:46
SAMUEL LIDSTRÖM
DAW: Sonar Platinum (64bit) with Melodyne Studio - Controllers: Roland VS-700C, Cakewalk A-500 Pro, Yamaha P90Desktop Audio Interface: RME HDSPe RayDAT - Laptop Audio Interface: RME Babyface Pro
|
Loptec
Max Output Level: -72 dBFS
- Total Posts : 948
- Joined: 2011/02/07 13:29:01
- Location: Sweden
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/26 02:46:47
(permalink)
Norrie
Are you finding the controls are also not matching up or is that just me ?
I have also found that there seems to be no way to control anything other than the top module... Selecting it with the mouse will not let me then control it with the VS.
Yes. It's exactly the same for me. All the control assignments are totally scrambled and make no sense at all...And selecting anything else than the top module is impossible, both with the vs-700c and with the mouse... disaster..
SAMUEL LIDSTRÖM
DAW: Sonar Platinum (64bit) with Melodyne Studio - Controllers: Roland VS-700C, Cakewalk A-500 Pro, Yamaha P90Desktop Audio Interface: RME HDSPe RayDAT - Laptop Audio Interface: RME Babyface Pro
|
Norrie
Max Output Level: -58.5 dBFS
- Total Posts : 1665
- Joined: 2010/04/20 15:48:15
- Location: Scotland
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/26 09:11:46
(permalink)
Thanks Loptec. Have you guys put reports in about this all ?
SONAR X3c Producer Pro Tools 11 Allen & Heath GS-R24 M Adam A77x i7 4930K @ 4.4Ghz
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/26 09:56:40
(permalink)
I've reported the EQ button thing.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
kerry
Max Output Level: -87 dBFS
- Total Posts : 191
- Joined: 2003/11/07 11:20:42
- Location: Norway
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/26 10:41:38
(permalink)
Experiencing the same problems. Also having problems with the "SNAP"-button. After I used it once, it freezes and can't be used to toggle SNAP on/off. Reported both. No response.
KeJ www.jlm.no ...if you don't know where to go, you'll never know if you've been there...
|
Loptec
Max Output Level: -72 dBFS
- Total Posts : 948
- Joined: 2011/02/07 13:29:01
- Location: Sweden
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/27 06:05:29
(permalink)
yup. can confirm the snap button issue. it's actually caused by the new "alternitiv snap setting" you get by holding down the N-key. - when pressing the Snap key on 700c sonar toggles snap on
- when pressing the Span key on 700c again, Sonar toggles this alternativ snap setting, instead of turning it off..
and because this confuses Sonar/700c in som way, the Snap button on 700c get stuck in on-mode and sonar's snap-setting get stuck in this alternativ mode (without having to hold any button down at all) I haven't reported anything yet, but will report everything I've seen so far today. Why can't we get some conformation from cakewalk!? It's like they're pretending not to see the vs-700 forum at all... Maybe they think we'd never switch DAW now, when we've already invested so much money in their products??.. ..Is this the reason they ignor us? They think we're stuck with them? Given all this money we've invested, couldn't they AT LEAST give us the respect of RESPONDING to our posts?!?!
post edited by Loptec - 2012/09/27 10:40:31
SAMUEL LIDSTRÖM
DAW: Sonar Platinum (64bit) with Melodyne Studio - Controllers: Roland VS-700C, Cakewalk A-500 Pro, Yamaha P90Desktop Audio Interface: RME HDSPe RayDAT - Laptop Audio Interface: RME Babyface Pro
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 2010/07/31 13:56:51
- Location: Ontario
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/27 08:50:09
(permalink)
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/27 09:01:52
(permalink)
I doubt it's that cynical. I just suspect the overall number of v700 users is fairly small, making support for it not the highest priority.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
Grent
Max Output Level: -87 dBFS
- Total Posts : 152
- Joined: 2008/12/10 12:09:10
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/09/27 09:56:00
(permalink)
The answer will be like, "we can't read all the forums, please use the report bug function". And "there are no plans to end VS-700 support in the forseeable future". In 6-8 weeks there might be a patch that resolves bugs but does not add any new features - be it newly introduced ones (X2) or long awaited ones.
|
Norrie
Max Output Level: -58.5 dBFS
- Total Posts : 1665
- Joined: 2010/04/20 15:48:15
- Location: Scotland
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/10/01 12:05:14
(permalink)
Anyone hear anything back yet ?
SONAR X3c Producer Pro Tools 11 Allen & Heath GS-R24 M Adam A77x i7 4930K @ 4.4Ghz
|
Mully
Max Output Level: -60 dBFS
- Total Posts : 1545
- Joined: 2004/09/15 02:08:05
- Location: Adelaide, Oztralia
- Status: offline
Re:ACT in X2 PC doesn't work on VS-700C
2012/10/02 08:42:20
(permalink)
Gee... 8.5 looking good again?
Jeepers....
ASUS H270, i7-7700, JLM BA & 1290, LA2A Opto4, loads of guff.
|