yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
A Couple of questions RE X2 Smart Tool and PRV
I'm trying to do a project in X2. I'm also trying some new ways of doing things.
Yup...I'm stumped.
First of all my Smart Tool defaults to the little "draw" pencil. I want it to default to the select tool. In X1 it did and I could still insert notes and stuff at will. How do I get the Smart Tool to default to select.
Second. I have a repeating pattern in my bass line that I'm doubling in the chorus with acoustic piano. No prob. Just copy the bass track to the piano track. Only I want octaves in the piano track. I can't figure out how to just lasso the piano pattern in the PRV and copy it an octave up. Or am I crazy cause this cant be done?? Normally I'd just copy the midi to a different track, raise it an octave and merge it back with old track. But I started thinking...you know I bet you can do that all in the PRV and not have to jump through those hoops. Can you??
Thanks.
I'm sure I'll be back later with questions. My X2 Smart Tool seems to be acting awful squirrely.
|
stickman393
Max Output Level: -60 dBFS
- Total Posts : 1528
- Joined: 2003/11/07 18:35:26
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/21 14:17:08
(permalink)
How about learning how the smart tool works in X2, rather than expecting to change it to the way you want?
Sorry to be smart-assed, but:
Use right-click drag to select notes.
You can then drag them +12.
I think it's easier... but then, I never used X1.
|
Splat 
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/21 14:28:27
(permalink)
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/21 14:29:08
(permalink)
yorolpal
I'm trying to do a project in X2. I'm also trying some new ways of doing things.
Yup...I'm stumped.
First of all my Smart Tool defaults to the little "draw" pencil. I want it to default to the select tool. In X1 it did and I could still insert notes and stuff at will. How do I get the Smart Tool to default to select.
You can't as such but it will react like the select tool in some areas. For example single clicking in the note area will set the now time and clicking on the centre of a note will change it to the select tool.
Second. I have a repeating pattern in my bass line that I'm doubling in the chorus with acoustic piano. No prob. Just copy the bass track to the piano track. Only I want octaves in the piano track. I can't figure out how to just lasso the piano pattern in the PRV and copy it an octave up. Or am I crazy cause this cant be done?? Normally I'd just copy the midi to a different track, raise it an octave and merge it back with old track. But I started thinking...you know I bet you can do that all in the PRV and not have to jump through those hoops. Can you??
Thanks.
You can use the PRV track pane to deselect a track from editing. Make sure the track pane is showing PRV menu-->View--->Track pane. Then just to the left of each track name are two square widgets. One will hide the track data, the other will enable & disable track editing. Disable all the tracks except the one you want to copy from, then renable the one you want to copy too, make that the active track by clicking on it's name in the track pane and then paste as usual. To move the notes up an octave you can either use the event inspector (Control bar) and enter "+12" into the "Pitch" box or click and shift drag them up. Shift will constrain the movement so they don't wander off time wise. HTH
I'm sure I'll be back later with questions. My X2 Smart Tool seems to be acting awful squirrely.
I look forward to your return. 
|
yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/21 16:40:23
(permalink)
Yup I've watched that video and it's a dandy.
Thanks, Karl ol pal. But as I said, my ST is acting mighty squirrely so it's not always doing what it's supposed to. And I'm familiar with your copy suggestion. But let me get this straight...if I lasso say six notes in the PRV there's no way to simply copy those and then paste them into a different position of the PRV with just a click or so?? You know like pasting quick and dirty horn harmonies or such. I'd really never tried that but I'm surprised it's not doable.
|
tKx5050
Max Output Level: -86 dBFS
- Total Posts : 221
- Joined: 2012/09/10 16:38:51
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/21 16:51:27
(permalink)
right-click drag select, ctrl-c, click where you want to put them and ctrl-v - but I know you know that - so what am I missing in your question?
Steve Sonar Platinum, Quad-Capture, I7-3770, 32Gb
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/21 17:20:08
(permalink)
Ctrl click and drag is the quickest way but I thought you wanted to change the target track which isn't quite as easy.
You'll need to cut and paste then and that's always going to be more than a one click option
|
yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/21 18:44:27
(permalink)
I think that's exactly what I'm after Karl. I want to lasso a selection and then drag A COPY of it to a new location in the PRV leaving the original lassoed selection right where it is. Will Ctrl Click drag to that? ****************HOOOORAY************************ With your clue Karl, ol pal I finnaly figured it out. Since the Smart Tool defaults to the pencil I have to RIGHT CLICK to lasso the selection then place the pencil over one of the notes in the selection to get the move tool then (like you said, almost) Ctrl, Click Drag to copy and paste what I want. Whew. I am such a dunce. Thanks everso!!!
post edited by yorolpal - 2012/10/21 18:57:14
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/22 01:44:51
(permalink)
No worries. I sorta assumed you knew the right click and drag was lasso but wanted it on the left click.
Anyway at least you're sorted......
|
yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/22 10:34:35
(permalink)
I'd been left click dragging to lasso using the select tool. That's what was getting me in trouble. Thanks again!
Also... never assume I know any blamed thing. I'm like the guy trying to write Moby Dick using only two fingers on a smart phone.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:A Couple of questions RE X2 Smart Tool and PRV
2012/10/22 10:38:58
(permalink)
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|