TGD
Max Output Level: -90 dBFS
- Total Posts : 29
- Joined: 2009/12/30 16:25:16
- Location: Heerlen, The Netherlands
- Status: offline
Installation question - what and how to install
Hi there,
I'll try to make my question brief, but there's alot of things I'm wondering about.
I have sonar 8, 8.5, x1 exp, and x2. Now I have a new pc (64bit) with an ssd (which is great) and I'm reinstalling everything.
What I want is to have only X2 installed, but all the plugins, presets and templates from all versions available.
Only it is not quite clear to me how the versions all differ on this.
I know the pantheon reverb and session drummer 2 (other content than 3) come with 8(.5) , but is there other content/plugin
that might be usefull from those versions. Also I heard that the loops and one shots differ between X1 and X2 and would be comlimental, but then again I also hear that the difference is that the X2 library contains the X1 loops and one shots combined with the beatscape content. Are there other differences, or is it just that ?
Does it make sense to have beatscape and the lib installed, or will just the X2 loops and one shots do?
It's all very confusing to me, mainly regarding the plugin content. Seperate installers (like guitar rig and stuff) I don't care about, they can be installed independantly and arent all needed, but I do want the most from my different versions.
So how can I make sure I have every plugin, preset, template and piece of content, but no redundant files on my hard drive ?
Since my ssd is quite expensive I don't want to waste space.
Next to this I'm also wondering how to set all the folder locations in X2 for best performance. I'm using a 256GB Sata600 SSD (Samsung 830) for my os, software and libraries and a 1TB seagate HDD for tracking.
Thanks in advance for anyone able to help me get some of these issues clear and a great day to you all,
Paul
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Installation question - what and how to install
2012/10/23 09:29:02
(permalink)
Bear in mind that a lot of the older plugins, notably the Dxi ones will not run under Sonar 64, so you're better off not even installing them.
Those that you do want to install - like the Pantheon are bets done via a custom install of 8.5
Just pop the dis in as though you were going to do a full install, then deselect everything apart from the "missing" plugins.
Quite honestly, you won't even miss Pantheon - the new Breverb is vastly superior in every aspect.
But don't even attempt this until you've got X2 totally up and running
a 256gB SSD is fine for your OS & programs, but libraries? You'll fill it up in no time
You're better off adding a 3rd HDD for sample libraries, both in terms of space requirements and you won't be bottle necking your system drive by having samples accessed from it
Disc 1 - OS & Programs
Disc 2 - Cakewalk Projects
Disc 3 - Sample Libraries, including all loops etc
You can select all this during install.
If you don't use Beatscape - don't install it!
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Installation question - what and how to install
2012/10/23 09:30:09
(permalink)
And you've posted the same question 4 times!
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
robert_e_bone
Moderator
- Total Posts : 8968
- Joined: 2007/12/26 22:09:28
- Location: Palatine, IL
- Status: offline
Re:Installation question - what and how to install
2012/10/23 09:43:49
(permalink)
I happen to have chosen to place the sound libraries on the same drive as the audio tracks, and do not have any issues on my machine.
I do not know if this is the best placement, it just made sense to me at the time that OS and program fetches would be likely concurrent with the tracking, so splitting those seemed logical.
I added the sample libraries to the non-OS drive as well, because I reasoned that with the amount of memory I have (32 GB), any needed sound samples would be largely loaded into memory on project load, at a point in time where tracking would not be occurring (wouldn't be hitting play/record during project load).
You can ALWAYS move them and just tell Cakewalk any new locations through Preferences, so I recommend starting with an approach that limits space on your SSD, and seeing if that causes any performance problems.
Bob Bone
Wisdom is a giant accumulation of "DOH!" Sonar: Platinum (x64), X3 (x64) Audio Interfaces: AudioBox 1818VSL, Steinberg UR-22 Computers: 1) i7-2600 k, 32 GB RAM, Windows 8.1 Pro x64 & 2) AMD A-10 7850 32 GB RAM Windows 10 Pro x64 Soft Synths: NI Komplete 8 Ultimate, Arturia V Collection, many others MIDI Controllers: M-Audio Axiom Pro 61, Keystation 88es Settings: 24-Bit, Sample Rate 48k, ASIO Buffer Size 128, Total Round Trip Latency 9.7 ms
|
gustabo
Max Output Level: -49.5 dBFS
- Total Posts : 2591
- Joined: 2009/01/05 17:32:38
- Status: offline
Re:Installation question - what and how to install
2012/10/23 14:53:34
(permalink)
Bristol_Jonesey
And you've posted the same question 4 times!
Maybe he's working on his post count 
Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Installation question - what and how to install
2012/10/24 05:59:44
(permalink)
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
awal
Max Output Level: -88 dBFS
- Total Posts : 106
- Joined: 2007/09/21 15:51:39
- Location: Paris, France
- Status: offline
Re:Installation question - what and how to install
2012/10/24 15:32:21
(permalink)
Hi all
I am doing a fresh install of X2, si here is my question for my pro Channel effects, should i use my old registration and serial numbers because i didn't get any with the x2 download.
Should i request the same for rapture and the DSF hd strings module.
Sorry for any typos, hope my message is clear cause i am in à bus trying to type. There is a strike today so no trains
Vive la France
Awal
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re:Installation question - what and how to install
2012/10/24 15:40:23
(permalink)
Everything you need to register your software should be in your store account.
|
awal
Max Output Level: -88 dBFS
- Total Posts : 106
- Joined: 2007/09/21 15:51:39
- Location: Paris, France
- Status: offline
Re:Installation question - what and how to install
2012/10/24 15:51:16
(permalink)
Thanks, i knew i would get the info before i arrive home, thanks a million you guys rock!!!!!!
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Installation question - what and how to install
2012/10/25 03:43:13
(permalink)
You will get new codes for Dim Pro, Rapture and any PC modules which were purchased separately, and X2 itself of course
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
ducatibruce2
Max Output Level: -79 dBFS
- Total Posts : 557
- Joined: 2008/10/05 09:04:31
- Location: Tasdemonia, Oz
- Status: offline
Re:Installation question - what and how to install
2012/10/25 07:30:10
(permalink)
Usually Sonar installs contain all the past plugins - they just aren't selected for the default install. Try a custom install of X2 & see what's in the various plugin folders.
S8.5.3PE & X1d P Exp & X2P, Q6600 @3Ghz, 4GB DDR2, XP SP3 With Knobs: 2 x Yamaha i88x mlan (ASIO), RS7000, Motif ESR, Roland SI24, VSynth XT, Varios, Fantom XR, JunoD, HPD10, Korg PadKontrol No knobs: P5, DimPro, Rapture, Z3ta+, IK stuff, ReCycle, Komplete8
|